Software :: Install To Make SCIM Have A QT Interface?
Jun 23, 2010What package do I need to install to make SCIM have a QT interface? Currently is appears to be using GTK2.KDE 3.5.9
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: Can't Connect To Wicd's D-bus Interface / Make It Possible?
Mar 12, 2010I've installed ubuntu 9.10 using a minimal install and started from there installing the rest of the things I needed.
I'm running KDE4.4 and Wicd 1.6.1.
Problem is, wicd worked fine, but I don't know what happened before I got this annoying problem.
After logging into KDE, wicd asks me for my password in order to connect to the network-device. After filling that in, I get the message code...
As you can see in the logging, internet is working fine. I manually have to start wicd-client and I get an extra wicd-icon in the taskbar showing me the signal strength as it should do.
I've been searching a lot, but can't find anything about this, except a lot of people having the same errormessage, but they have some errors in the wicd.log too.
Ubuntu :: Make Chunky Interface Smaller / Funkier?
May 27, 2010Been using Ubuntu 9.04 for a while now but I've always felt that the interface is too chunky. The buttons, text, dialogs are waaaay too big. Is there any good solution to reducing the size of everything, including dialogs and buttons. So far, I have been dropping the DPI with mixed results. It mostly affects fonts so it hasn't fully met my needs.Hence, I am posting on here to see how other people manage the chuny-ness of Ubuntu. Have you just gotten used to it? Have you got your own workaround? Have you converted to kUbuntu!?
View 2 Replies View RelatedNetworking :: Will Bringing Down Loopback Interface Make Whole Server To Go Down?
Dec 14, 2010I have a client's linux server where someone added a script which sends spam mails from the server's local loopback address (127.0.0.1) all my seniors worked on it and couldn't trace the script on the server this issue was going for a week, now I have an idea to bring down the loopback interface of that particular server(ya, that was not a permanent solution but just had an idea), but my support manager told that it will bring the whole server down(so far as i have learn't loopback address is used only for testing the NIC card's functionality), is that really bring the server down.?. How ever i tried this using a test machine all the connections works fine even after i bring down the loopback interface. As my client's server is a production server i can't test it there without clear knowledge, can any one help me out whether will it bring down the server or will it cause any side effects on it(i know that you guys are experts so i am asking it here)?
View 5 Replies View RelatedSoftware :: Make A GUI Interface That Uses Multiple Programs And Commands?
Jan 11, 2010I am curious of how to make a GUI interface that uses multiple programs and commands. I have found wxwidgets as the most likely candidate for making my own interface.Is this the best programming language for a beginner?
View 3 Replies View RelatedSecurity :: Mount 2 Network Interface Card (NIC) And Make A Bridge
Apr 1, 2010Actually i'm doing an ingenior training in SAGEM company, well i'm trying to develop an application which is able ti disturb the IP Network,my idea was is to mount 2 Network Interface Card (NIC) and make a bridge to pass the IP flow and to exploit the firewall Netfilter using iptables command.The application has to import a text file containing a binary array like this one:
0 1 0 : 0 corresponds to iptables -p ip ACCEPT
1 1 1 : 1 corresponds to iptables -p ip DROP
0 0 1
==> So the expected result is to have 5 ip datagrams dropped
My idea was: if 0 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
if 1 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j DROP
The problem was: After executing the application and parsing the text file,
with iptables -L -v: i have
Code:
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
-A FORWARD -p ip -m limit --limit-burst 1 -j DROP
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
which is logic, but when i sniff with wireshark i find more packets are dropped(6,7 or 8 are dropped), like i had put more DROP rules. and sometimes i found the exact value(usually 5 dropped).
Software :: Make A Web-based Interface For User Configuration Program?
Feb 9, 2010I currently doing a network emulator program and the features must includes the web-based interface for user configuration. I able to run my program through command line. But I would like to ask how to associate my program to web-based interface for user configuration?
View 8 Replies View RelatedSoftware :: Failed To Install Chpasswd 2.2-4 I Have ./configure, Make, Make Install?
May 2, 2010i installed a mail server in RHEL 5 with postfix, dovecot, openwebmail, but i failed to install chpasswd 2.2-4 i have ./configure, make, make install, but nothing happens can any one help me with some documentetion for chpasswd for changing password for mail account
View 5 Replies View RelatedGeneral :: How To Use Scim?
Jul 11, 2011I've been trying to use Scim because I was told it can type in various different languages, but so far I've had no luck on using it.anyone know how to configure itGUI or Terminal) to type in the language I would like it to (Korean)?
View 9 Replies View RelatedFedora :: Scim / Xim From KDE In Firefox On 12
Nov 25, 2009I have scim-hangul and all its dependencies installed. I can type hangul in Konsole and Konqueror, but it doesn't work in Firefox. How do I investigate this? What are some things I can try? Edit: I saw another thread on iBus and Korean. I am trying to install ibus-hangul. We'll see how that goes. Edit: Okay, I installed ibus-hangul. Then I ran im-chooser and selected ibus-hangul. From the preferences, I added "hangul". Finally, I logged out and back in and it is all working.
View 1 Replies View RelatedUbuntu :: SCIM Does Not Seem To Work With Kubuntu 10.04
Aug 12, 2010In earlier versions of (K)ubuntu, I have used SCIM and the Yawerty input method to input Russian with a phonetic Latin keyboard.SCIM does not seem to work with Kubuntu 10.04, and UIM does not have (as far as I can tell from searching the repositories) Russian input.The Russian keyboard layout installable in Kubuntu is in the Russian version of the layout, rather than a phonetic Latin layout; I am not familiar with the normal Russian layout and I do not have stickers to stick on the keys to guide myself in using that layout.
View 2 Replies View RelatedFedora :: Scim Do Not Work With Firefox - Pidgin
Nov 26, 2010Im using fedora14-KDE and installed scim. Scim works good in Konqueror, terminal, kwrite, kword... but do not work with firefox, pidgin...I dont know how to fix this problem.
View 5 Replies View RelatedUbuntu :: SCIM No Longer Works After Lucid?
Aug 8, 2010I installed Lucid several days ago, and have just noticed that SCIM no longer works. I need it for Japanese input, but cannot turn on Anthy. The manual is either nonexistent or extremely terse with a lot of presupposed knowledge.I've installed German, Russian and Spanish language support, along with CJK. I can't even get the SCIM tool to pop up now---except ONCE!Simply reinstalling using Synaptic overlays the existing problem(s), and does not resolve any issues.SCIM may be conflicting with the desktop Switcher applet? Actually, SCIM seems to be conflicting with other Gnome desktop shortcuts, as well
View 1 Replies View RelatedSoftware :: Scim/Skim Not Working With Kate?
Jul 17, 2010I'm trying to teach myself Japanese.So, naturally, I signed up at a Japanese social website for language practice. Now, all I need is to be able to type in Japanese. I followed the instructions at this site, and everything seems to work. Everything, that is, except kate. Every other app works fine (even the terminal). But when I press enter to confirm my choice of hiragana/katakana/kanji in kate, the characters just vanish as though they were never there
View 1 Replies View RelatedSlackware :: BUG: Scim-bridge Is Conflicting With Firefox
May 29, 2010This happens under slackware 13.1 32 bit and 64 bit. If scim-bridge is running, firefox will freeze the whole XWindows, especially when a pop-up window appears within firefox. Replacing scim with fcitx (Chinese only) input method solveed this problem. This annoyed me for quite a period even when I was using slackware-current because I did not know what caused firefox to behave strangely. Why no one reported this problem? I think no one uses scim and firefox at the same time here.
View 6 Replies View RelatedSlackware :: Firefox 3.6 And Scim-bridge Confict
Jan 25, 2010when i removepkg scim-bridge and exec firefox3.6 it show: (firefox-bin:11378): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim-bridge.so: — now,all ok. when i install pkg scim-bridge it no response. Finally found that the / etc / profile.d / The following scim.sh remove executable permissions, problem-solving! last. i slackpkg installpkg scim-bridge.
View 5 Replies View RelatedSlackware :: Enable Scim To Input Chinese?
Jun 8, 2011I finished my installation of Slackware 13.37, but I found I cannot input chinese using pinyin in KDE. Of course, I started "scim input method", I mean I can see the icon of keyboard in the tray bar, but I cannot swith input method into chinese with "Control + Space".
View 14 Replies View RelatedSlackware :: Get Japanese Input With Scim-anthy
Nov 11, 2010I can't seem to get Japanese input working with scim-anthy. I have scim 1.4.9 installed and the daemon running. I have the scim-anthy 1.3.1 package installed as well. I can open and modify the scim-settings, but I can't get the anthy dialog to appear. Apparently, ctrl-space should bring up the dialog, but nothing happens. I tried following the instructions on this page under "Open a program with japanese input enabled - via command line", but still no dialog. After starting the daemon, I tried:
Code: XMODIFIERS='@im=SCIM' LC_CTYPE=en_US.UTF-8 gvim And no luck. Note that I don't really understand what that command is supposed to do. Should it be something different?
CentOS 5 :: Losing Correct SCIM Support
Apr 30, 2009I upgraded my OS from 5.2 to 5.3 through the system built-in updater. Then I found that I lost correct SCIM support for some applications. I was able to type Chinese and Japanese into aMSN and Skype when it was CentOS 5.2. But I can no longer do that now. Typing into some other applications still works. These applications include sylpheed, firefox, and open office....
View 3 Replies View RelatedDebian :: Scim Stopped Working In LibreOffice-writer
Sep 8, 2015I use scim to input Chinese in Libreoffice-writer. It worked on one of my computers until a couple of days ago.
Normally to start scim I press Ctrl and the space bar at the same time. Then I use the input method Cangjie to input Chinese.
Now when I do so in Libreoffice-writer "English/European" appears in the scim panel. The other choice is "English/Keyboard". The choice of either doesn't enable me to input Chinese.
In all other software scim works as before.
The computer runs Debian sid. On another computer that runs Debian sid too I don't have the same problem. I have version 5 of Libreoffice on both computers.
Debian :: Installed Scim With The Package Manager, But Cannot Start It?
May 8, 2011I have just switched from Ubuntu to Debian, so on the whole I can easily figure out how to use Debian. Scim however, is giving me a problem. I have installed scim with the package manager, but cannot start it.With Ubuntu is was ctrl+space bar, but so far I have not found any key combinations that work. In the preferences menu there is an entry for scim set-up, but it is only an information page.AlthoughI have been using Linux for a few years, I am not much of a terminal user, so I have not even thought of going that route for fear of wrecking my new system.Considering how easy it was to use scim on Ubuntu, which is a Debian derivative, it should not be difficult to get it working. (I am not a computer wizard. In fact, before switching to Linux I hated the machines.
View 2 Replies View RelatedUbuntu :: Can't Type In Hangul (korean) Because SCIM Isn't Working
May 2, 2011I can't type in hangul (korean) because SCIM isn't working. It's installed and configured to work.
Anyone else having this problem in 11.04?
Software :: Get Japanese IME Working With SCIM Under Mint(Gloria)?
Jan 24, 2010I have what seems to be an incomplete or incompletely configured configuration of SCIM on my Netbook running Linux Mint(Gloria).To tell the truth, I am not even sure SCIM is the best choice, since I see claims (in LQ forums) that SCIM has been discontinued, and I cannot connect to the SCIM website.So what I want to do is get SOME Japanese Input Method working under this installation of Gloria, for now, I presume SCIM is the right choice for its front end. But I am certainly open to other suggestions.But I must shrink from the idea of installing language support for all languages, which is what Control Center>Language Support seems to threaten to do: it is only a Netbook, I can't afford to waste that much space.
what I see is the above Control Center option, and one other that must be relevant: ControlCenter>SCIM Input MethodSetup. But I don't see any documentation for this, and the menu item names are vaguely suggestive of their functions, not descriptive. So I am quite unsure which of them I need to use to get it working. Is it true, for example, that SCIM itself does not include the Input Methods? I have to download a Japanese IME from somewhere else? Which one? Is that what Control Center>Language Support will do? What DO they mean by "Front end module"? Why does SCIM only recognize an English keyboard layout and a "RAW CODE" (in IM Engine Global Setup)? have Greek and Russian layouts enabled on this machine, too.So now that you have a pretty good idea how disorienting I find the current situation, please point me to something that will clear up the confusion and possibly even give a list of step-by-step directions for getting a Japanese IME working on this machine.
Slackware :: Ctrl+Space Not Work On SCIM Or IBus
Mar 7, 2010The magic key Ctrl+Space doesnt always work with SCIM. Too tired with SCIM, I decided to remove it and install ibus, ibus-qt, ibus-unikey (for typing Vietnamese).
Then, I start it with:
Code:
Then I try press Ctrl+Space to trigger but it doesnt work, even it quits itself sometimes.
The hotkey problem also occurs with KNotes. I have set Global Shortcut for some functions such as New Note, Show All Notes. And it works only once in that session. If restart machine, those shortcut is useless.
My system is Slackware 13.0 with KDE.
Slackware :: Upgrading To Firefox 4 Rc - Scim Stop Working
Mar 21, 2011After upgrading to firefox 4 rc, scim stop working. When ctrl+space pressed, nothing happened. (with latest scim package:
[Code].....
Slackware :: Unable To Use Scim To Input The Korean Language?
Jul 14, 2011I originally made this post in Linux-General, but only one person was really answering the question and now he hasn't been responding, so I've come here since Scim is also Slackware related.Simply put, I need to be able to use Scim to input the Korean language.Here's the original thread:[URL]
View 14 Replies View RelatedOpenSUSE :: SCIM Stuff That Seems To Screw Around With Normal Text Input?
Apr 8, 2010I was recently surprised by this SCIM stuff that seems to screw around with my normal text input. I try to be curious and approach my issues with an open mind, so before I try to remove SCIM, I want to know what the hell it's supposed to do.but it's not obvious to me
View 3 Replies View RelatedOpenSUSE :: Scim Japanese Input Stopped Working In KWrite?
May 11, 2010I can't input Japanese charactersn KWriteough the input works in all other applications as far as I know). Does anyone have an idea what the cause might be, or what I should be looking at?The point is not that can't see the characters (but e.g. gibberish instead), but that the characters that I type in the input bar are not transfered into KWrite upon commit.
View 1 Replies View RelatedOpenSUSE :: SCIM Chinese Input Works On Dolphin But Not In Firefox
Mar 10, 2011I've installed 11.4 KDE x86-64,which downloaded last night,a GM version. Things working great except 2 thing : SCIM & wifi.SCIM Chinese input works great when 11.3 KDE,but in 11.4 KDE it ONLY works in Dolphin,not works in Firefox.........
View 5 Replies View RelatedUbuntu :: SCIM Stopped Working, But Ibus Doesn't Work Either?
Mar 6, 2010upgrading to9.10 I suddenly was unable use SCIM to switch language input methods.After searching around, I discovered that with Ubuntu 9.10 Ibus was being used in place of SCIM. That's all fine and good, but I can't get Ibus to work. Specifically, when I open the Ibus settings pane and add my desired languages, the settings aren't saved when I exit.So I tried switching back to SCIM. I changed my bashrc settings and set the keyboard input in language settings back to SCIM. No nice.Honestly, I just want to be able to swich language input methods--I don't care if I use SCIM or Ibus.
View 2 Replies View Related