when i removepkg scim-bridge and exec firefox3.6 it show: (firefox-bin:11378): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim-bridge.so: — now,all ok. when i install pkg scim-bridge it no response. Finally found that the / etc / profile.d / The following scim.sh remove executable permissions, problem-solving! last. i slackpkg installpkg scim-bridge.
View 5 RepliesThis happens under slackware 13.1 32 bit and 64 bit. If scim-bridge is running, firefox will freeze the whole XWindows, especially when a pop-up window appears within firefox. Replacing scim with fcitx (Chinese only) input method solveed this problem. This annoyed me for quite a period even when I was using slackware-current because I did not know what caused firefox to behave strangely. Why no one reported this problem? I think no one uses scim and firefox at the same time here.
View 6 Replies View RelatedAfter upgrading to firefox 4 rc, scim stop working. When ctrl+space pressed, nothing happened. (with latest scim package:
[Code].....
I have scim-hangul and all its dependencies installed. I can type hangul in Konsole and Konqueror, but it doesn't work in Firefox. How do I investigate this? What are some things I can try? Edit: I saw another thread on iBus and Korean. I am trying to install ibus-hangul. We'll see how that goes. Edit: Okay, I installed ibus-hangul. Then I ran im-chooser and selected ibus-hangul. From the preferences, I added "hangul". Finally, I logged out and back in and it is all working.
View 1 Replies View RelatedIm using fedora14-KDE and installed scim. Scim works good in Konqueror, terminal, kwrite, kword... but do not work with firefox, pidgin...I dont know how to fix this problem.
View 5 Replies View RelatedI've installed 11.4 KDE x86-64,which downloaded last night,a GM version. Things working great except 2 thing : SCIM & wifi.SCIM Chinese input works great when 11.3 KDE,but in 11.4 KDE it ONLY works in Dolphin,not works in Firefox.........
View 5 Replies View RelatedI finished my installation of Slackware 13.37, but I found I cannot input chinese using pinyin in KDE. Of course, I started "scim input method", I mean I can see the icon of keyboard in the tray bar, but I cannot swith input method into chinese with "Control + Space".
View 14 Replies View RelatedI can't seem to get Japanese input working with scim-anthy. I have scim 1.4.9 installed and the daemon running. I have the scim-anthy 1.3.1 package installed as well. I can open and modify the scim-settings, but I can't get the anthy dialog to appear. Apparently, ctrl-space should bring up the dialog, but nothing happens. I tried following the instructions on this page under "Open a program with japanese input enabled - via command line", but still no dialog. After starting the daemon, I tried:
Code: XMODIFIERS='@im=SCIM' LC_CTYPE=en_US.UTF-8 gvim And no luck. Note that I don't really understand what that command is supposed to do. Should it be something different?
The magic key Ctrl+Space doesnt always work with SCIM. Too tired with SCIM, I decided to remove it and install ibus, ibus-qt, ibus-unikey (for typing Vietnamese).
Then, I start it with:
Code:
Then I try press Ctrl+Space to trigger but it doesnt work, even it quits itself sometimes.
The hotkey problem also occurs with KNotes. I have set Global Shortcut for some functions such as New Note, Show All Notes. And it works only once in that session. If restart machine, those shortcut is useless.
My system is Slackware 13.0 with KDE.
I originally made this post in Linux-General, but only one person was really answering the question and now he hasn't been responding, so I've come here since Scim is also Slackware related.Simply put, I need to be able to use Scim to input the Korean language.Here's the original thread:[URL]
View 14 Replies View RelatedI had an intstall of 10.2 that I'd been using forever that has a Prisim card in it that I was using as router/access point across a bridge. Recently I rebuilt my machine (replacing a bunch of drives) and installed 13.1. I'm having some difficulty getting my AP reestablished. The card is showing on the pci bus
Code:
# lspci|grep Prism
08:01.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
[code]....
I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.
View 3 Replies View RelatedI've been trying to use Scim because I was told it can type in various different languages, but so far I've had no luck on using it.anyone know how to configure itGUI or Terminal) to type in the language I would like it to (Korean)?
View 9 Replies View RelatedIn earlier versions of (K)ubuntu, I have used SCIM and the Yawerty input method to input Russian with a phonetic Latin keyboard.SCIM does not seem to work with Kubuntu 10.04, and UIM does not have (as far as I can tell from searching the repositories) Russian input.The Russian keyboard layout installable in Kubuntu is in the Russian version of the layout, rather than a phonetic Latin layout; I am not familiar with the normal Russian layout and I do not have stickers to stick on the keys to guide myself in using that layout.
View 2 Replies View RelatedI installed Lucid several days ago, and have just noticed that SCIM no longer works. I need it for Japanese input, but cannot turn on Anthy. The manual is either nonexistent or extremely terse with a lot of presupposed knowledge.I've installed German, Russian and Spanish language support, along with CJK. I can't even get the SCIM tool to pop up now---except ONCE!Simply reinstalling using Synaptic overlays the existing problem(s), and does not resolve any issues.SCIM may be conflicting with the desktop Switcher applet? Actually, SCIM seems to be conflicting with other Gnome desktop shortcuts, as well
View 1 Replies View RelatedWhat package do I need to install to make SCIM have a QT interface? Currently is appears to be using GTK2.KDE 3.5.9
View 1 Replies View RelatedI'm trying to teach myself Japanese.So, naturally, I signed up at a Japanese social website for language practice. Now, all I need is to be able to type in Japanese. I followed the instructions at this site, and everything seems to work. Everything, that is, except kate. Every other app works fine (even the terminal). But when I press enter to confirm my choice of hiragana/katakana/kanji in kate, the characters just vanish as though they were never there
View 1 Replies View RelatedI upgraded my OS from 5.2 to 5.3 through the system built-in updater. Then I found that I lost correct SCIM support for some applications. I was able to type Chinese and Japanese into aMSN and Skype when it was CentOS 5.2. But I can no longer do that now. Typing into some other applications still works. These applications include sylpheed, firefox, and open office....
View 3 Replies View RelatedI use scim to input Chinese in Libreoffice-writer. It worked on one of my computers until a couple of days ago.
Normally to start scim I press Ctrl and the space bar at the same time. Then I use the input method Cangjie to input Chinese.
Now when I do so in Libreoffice-writer "English/European" appears in the scim panel. The other choice is "English/Keyboard". The choice of either doesn't enable me to input Chinese.
In all other software scim works as before.
The computer runs Debian sid. On another computer that runs Debian sid too I don't have the same problem. I have version 5 of Libreoffice on both computers.
I have just switched from Ubuntu to Debian, so on the whole I can easily figure out how to use Debian. Scim however, is giving me a problem. I have installed scim with the package manager, but cannot start it.With Ubuntu is was ctrl+space bar, but so far I have not found any key combinations that work. In the preferences menu there is an entry for scim set-up, but it is only an information page.AlthoughI have been using Linux for a few years, I am not much of a terminal user, so I have not even thought of going that route for fear of wrecking my new system.Considering how easy it was to use scim on Ubuntu, which is a Debian derivative, it should not be difficult to get it working. (I am not a computer wizard. In fact, before switching to Linux I hated the machines.
View 2 Replies View RelatedI can't type in hangul (korean) because SCIM isn't working. It's installed and configured to work.
Anyone else having this problem in 11.04?
I have what seems to be an incomplete or incompletely configured configuration of SCIM on my Netbook running Linux Mint(Gloria).To tell the truth, I am not even sure SCIM is the best choice, since I see claims (in LQ forums) that SCIM has been discontinued, and I cannot connect to the SCIM website.So what I want to do is get SOME Japanese Input Method working under this installation of Gloria, for now, I presume SCIM is the right choice for its front end. But I am certainly open to other suggestions.But I must shrink from the idea of installing language support for all languages, which is what Control Center>Language Support seems to threaten to do: it is only a Netbook, I can't afford to waste that much space.
what I see is the above Control Center option, and one other that must be relevant: ControlCenter>SCIM Input MethodSetup. But I don't see any documentation for this, and the menu item names are vaguely suggestive of their functions, not descriptive. So I am quite unsure which of them I need to use to get it working. Is it true, for example, that SCIM itself does not include the Input Methods? I have to download a Japanese IME from somewhere else? Which one? Is that what Control Center>Language Support will do? What DO they mean by "Front end module"? Why does SCIM only recognize an English keyboard layout and a "RAW CODE" (in IM Engine Global Setup)? have Greek and Russian layouts enabled on this machine, too.So now that you have a pretty good idea how disorienting I find the current situation, please point me to something that will clear up the confusion and possibly even give a list of step-by-step directions for getting a Japanese IME working on this machine.
I was recently surprised by this SCIM stuff that seems to screw around with my normal text input. I try to be curious and approach my issues with an open mind, so before I try to remove SCIM, I want to know what the hell it's supposed to do.but it's not obvious to me
View 3 Replies View RelatedI can't input Japanese charactersn KWriteough the input works in all other applications as far as I know). Does anyone have an idea what the cause might be, or what I should be looking at?The point is not that can't see the characters (but e.g. gibberish instead), but that the characters that I type in the input bar are not transfered into KWrite upon commit.
View 1 Replies View Relatedupgrading to9.10 I suddenly was unable use SCIM to switch language input methods.After searching around, I discovered that with Ubuntu 9.10 Ibus was being used in place of SCIM. That's all fine and good, but I can't get Ibus to work. Specifically, when I open the Ibus settings pane and add my desired languages, the settings aren't saved when I exit.So I tried switching back to SCIM. I changed my bashrc settings and set the keyboard input in language settings back to SCIM. No nice.Honestly, I just want to be able to swich language input methods--I don't care if I use SCIM or Ibus.
View 2 Replies View Related[rant]Ok, I've been ignoring this for a couple of months, but now it's gotten to me and I want to know what's causing it.[/rant] Here's my problem. I have scim 1.4-9 (latest) installed for Japanese input. It works fine. I have no problems with it. However, when I launch Synaptic or update manager a duplicate instance of scim starts.This is on Debian Squeeze. See below:
Fresh reboot:
Code:
scim-bridge 34.2MIB
scim-helper-manager 32.7MIB
scim-launcher x2 47.8MIB, 165.4MIB
scim-panel-gtk 153.2MIB
After launching Synaptic or Update manager:
B signifies before as above
Code:
B scim-bridge 34.2MIB
scim-bridge 34.2MIB
B scim-helper-manager 32.7MIB
scim-helper-manager 32.8MIB
[code].....
It's not a huge deal, because when I close said programs, the duplicate process stop. I just find it odd because these are the only two programs that seem to cause it. Oh, and I'm using Gnome, if that matters.
I use Lenny 2.6.26-1-686 and kde 3.5.10I installed scim/skim and a great load of related packages and some fonts. I changed a lot of configuration files, so many times that I'm at a loss about them right now. Skim is starting with kde, and an icon is showing at the lower right corner. If I press Alt+F2 to run another app though, this icon disappears. I configured skim at the meny "Main Toolbar Configuration" to "always show" [3]. So I can still configure it from this Toolbar that is always at the desktop. But I can't really use the programme.
Well, I'm trying to type romanized Pali fonts (Pali is the language of Buddhist scriptures).When I run openoffice, for instance, and try to select the "input method" there's only English/European; Raw Code; and Keyboard for alternatives.I created the file "/usr/share/m17n/sa-translit.mim" with a map for transliteration of the special characters. I learned how to do this here:The first thing I noted is that when I pasted the content of the file to the terminal, some characters appeared as "blank squares". So I guess my system can't find any fonts installed to print these characters. But I thought I had installed the fonts that supported them (Gentium, Dejavu Sans and others). I must be missing something.
At the K-Menu, if I go to "Settings" -> "SCIM Imput Method Setup" it doesn't work any more. No window opens. At first, when I was starting to try to make it work, I could open this setup window and the "sa-translit.mim" file was there under the "Other" category (but it didn't really work, I don't know why). Now this setup doesn't run anymore, and at the "Configure" window for Skim I have only "English/European" and "Raw Code" at "Global Setup"-> "Other".But I have many things at /usr/share/m17n/ which should be showing here, I guess.
My /etc/scim/global
SupportedUnicodeLocales = en_GB.utf8
/DefaultPanelProgram = /usr/bin/scim-panel-kde
[code]....
While I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'.
I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect.
a) what is this SCIM input method
b) how can I make it so that it is not the default?
I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set.
I just installed Slackware 13.1 64b. version, everything seemed to load fine, no faults, no errors, no crashes.Firefox package installed, but when I try to run it I get
~/myfiles/firefox_
/usr/lib/firefox-4.0b4/run-mozilla.sh: line 141: /usr/lib/firefox-4.0b4/firefox-bin: No such file or directory
[code]....
Anyone built the latest release?
Here's the source: ftp://ftp.mozilla.org/pub/mozilla.or.../3.5.6/source/
Security Fixes: http://www.mozilla.org/security/know...l#firefox3.5.6
I'm currently downloading the source and will build and report back how it goes.