Debian :: Scim Stopped Working In LibreOffice-writer
Sep 8, 2015
I use scim to input Chinese in Libreoffice-writer. It worked on one of my computers until a couple of days ago.
Normally to start scim I press Ctrl and the space bar at the same time. Then I use the input method Cangjie to input Chinese.
Now when I do so in Libreoffice-writer "English/European" appears in the scim panel. The other choice is "English/Keyboard". The choice of either doesn't enable me to input Chinese.
In all other software scim works as before.
The computer runs Debian sid. On another computer that runs Debian sid too I don't have the same problem. I have version 5 of Libreoffice on both computers.
I can't input Japanese charactersn KWriteough the input works in all other applications as far as I know). Does anyone have an idea what the cause might be, or what I should be looking at?The point is not that can't see the characters (but e.g. gibberish instead), but that the characters that I type in the input bar are not transfered into KWrite upon commit.
upgrading to9.10 I suddenly was unable use SCIM to switch language input methods.After searching around, I discovered that with Ubuntu 9.10 Ibus was being used in place of SCIM. That's all fine and good, but I can't get Ibus to work. Specifically, when I open the Ibus settings pane and add my desired languages, the settings aren't saved when I exit.So I tried switching back to SCIM. I changed my bashrc settings and set the keyboard input in language settings back to SCIM. No nice.Honestly, I just want to be able to swich language input methods--I don't care if I use SCIM or Ibus.
I'm running Kubuntu 11.04 and LibreOffice Writer 3.3.2. I'm trying to print a #10 envelope on an HP LaserJet 5M printer. When I create the envelope and attempt to print it, LIbreOffice sets the paper size to #10 Envelope, as it should. I put the envelope into the manual feed tray and initiate the actual printing operation. The printer goes through the motions of processing the output -- and then goes back to the READY state without printing anything. I've tried using all possible Paper Tray settings and also using the CUPS drivers rather than the Foomatic drivers. None of that makes a difference. What does make a difference is setting the paper size to Letter, but then, of course, the information prints in the wrong place on the page.
I wrote a document using LibreOffice Writer. It has heading styles and a generated table of contents.I saved the document to ODT and as PDF. I loaded the PDF into Caliber as an e-Book.
I converted the PDF to EPUB format for Nook(tm) devices. I stored the EPUB to my 'droid phone and loaded it into an EPUB reader. VIOLA! I can see the table of contents as page #1. I cannot see any other pages in the EPUB. I can read the original PDF just fine.
Q1. What must I do along the way so that I have a useful EPUB? (I don't need fancy just complete and readable.) Q2. Are their things that I need to do to the PDF in Calibre? Q3. Are there things I need to do in LibreOffice Writer or to the generated PDF before I convert it to EPUB with Calibre?
Have been having some problems with Libreoffice Writer crashing every time I try to save a file that contains any kind of multimedia (usually images) so I decided to completely remove the app and any trace of it and start again.
After complete removal I reinstalled from the Opensuse repo 3.3.1
The porblem I have now is that when I start typing in writer absolutely nothing happens. Wait approximately one minute and the text I typed appears. Try to backspac to delete or type some more and the behaviour persists.
I do monthly reports by copying the previous document, update the text and change the images. The images are the same size and numbers each months. Since last month I upgraded my laptop to Natty and suddenly my document went from 942 kB to 10.1 MB in .odt. When saving to PDF the usual size of 472 went up to 1.9 MB. I have searched the net and the forums but haven't seen anything about a similar issue.
I'm not sure if it's an issue that is from the previous document being produced in Open Office and now updated and saved in Libreoffice. Or if it's somehow something to do with the upgrade from Maverick to Natty. I would hope I don't have to uninstall Libreoffice and install Open Office as a solution (which I understand is not entirely easy in Natty, something I read about Open Office being transitional to Libre). I can't email simple documents to customers that's over 10 MB large...
I'm trying to teach myself Japanese.So, naturally, I signed up at a Japanese social website for language practice. Now, all I need is to be able to type in Japanese. I followed the instructions at this site, and everything seems to work. Everything, that is, except kate. Every other app works fine (even the terminal). But when I press enter to confirm my choice of hiragana/katakana/kanji in kate, the characters just vanish as though they were never there
I have what seems to be an incomplete or incompletely configured configuration of SCIM on my Netbook running Linux Mint(Gloria).To tell the truth, I am not even sure SCIM is the best choice, since I see claims (in LQ forums) that SCIM has been discontinued, and I cannot connect to the SCIM website.So what I want to do is get SOME Japanese Input Method working under this installation of Gloria, for now, I presume SCIM is the right choice for its front end. But I am certainly open to other suggestions.But I must shrink from the idea of installing language support for all languages, which is what Control Center>Language Support seems to threaten to do: it is only a Netbook, I can't afford to waste that much space.
what I see is the above Control Center option, and one other that must be relevant: ControlCenter>SCIM Input MethodSetup. But I don't see any documentation for this, and the menu item names are vaguely suggestive of their functions, not descriptive. So I am quite unsure which of them I need to use to get it working. Is it true, for example, that SCIM itself does not include the Input Methods? I have to download a Japanese IME from somewhere else? Which one? Is that what Control Center>Language Support will do? What DO they mean by "Front end module"? Why does SCIM only recognize an English keyboard layout and a "RAW CODE" (in IM Engine Global Setup)? have Greek and Russian layouts enabled on this machine, too.So now that you have a pretty good idea how disorienting I find the current situation, please point me to something that will clear up the confusion and possibly even give a list of step-by-step directions for getting a Japanese IME working on this machine.
I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.
I just got a new pc after my two pc's decided to die. I have had them for many years, maybe around 2001. So, I am new to this 64 bit OS. I'm running squeeze amd64. I am having some troubles with flash in Iceweasel. It just stopped working one day. So, I downloaded Firefox to see if flash would work in it. Here's the interesting thing. Iceweasel will play flash. I will close the browser and reopen to discover it no longer wants to play flash. I'll open Firefox, then close it. I'll then open Iceweasel and Flash will work in Iceweasel again.
This happens often. To get Flash to work, I just close Iceweasel, open Firefox, close Firefox, open Iceweasel and go to a flash site and all is good. Is there something I can do to get Flash to always work without opening Firefox?
My printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
ethernet suddenly stopped working and can't get it back, says something about device not active but it works well with the Debian live dvd, what could be the problem?I'm using mobile internet now and this seems to have happened after setting up the mobile connection but I dont think it as anything to do with the wired problem.
So everything was working perfectly on my system. I have Debian SID, with the debian-multimedia repos and liquorix repos for kernels. Flash worked perfectly one boot, then the next boot the video still works perfectly but no audio. I found several "fixes" on the web, including creating .asoundrc in your home directory and another that said to Quote:edit /etc/firefox/firefoxrc -- change the line FIREFOX_DSP="none" to FIREFOX_DSP="aoss"neither of those have done anything. Have tried using both the flashplugin-nonfree and flashplayer-mozilla, same thing on either. ALL other sound works, smplayer, amarok, system sounds, etc.
Wakeonlan was working just fine with Wheezy on this machine. After upgrade, wakeonlan will resume from suspend but not from shutdown.
I have no problem with other machines (same software setup) after upgrade. None of my other machines have a broadcom NIC.
No BIOS settings were changed during the upgrade. If I enter the BIOS on boot and make sure settings are correct then 'save' and shutdown, without booting to debian, I can then successfully wakeonlan. Then, if I do not boot debian, but shutdown before debian starts, I can wakeonlan successfully again.
If I boot debian and then shutdown, game over: wakeonlan nolonger works.
$ ethtool eth0 | grep -i wake Supports Wake-on: g Wake-on: g
My Iceweasel is not consistently opening pages. This is new behavior after changing the /etc/network/interfaces file for setting up bridging. The home page is advanced google search. When Iceweasel opens to google, I get a message saying the site is not secure and won't open it. Inputting [URL] ...., it takes about 90 seconds before it opens the site then freezes. If I go to forums.debian.net, the site is fully navigable, if I put anything in the Iceweasel search bar, it freezes.
For some reason my bash autocomplete stopped working. I get the error when I try to cd into a directory, pressing <tab> for autocomplete: cd A-sh: <( compgen -d -- 'A' ): No such file or directory Autocomplete works for the root user and for the other user on the machine, just not logged in as this user. The .bashrc file looks fine to me, and I didn't make any changes to it to even cause the bash autocomplete to stop working (as far as I know).
# enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ]; then . /etc/bash_completion fi What else could cause autcomplete to stop working? I log in via ssh, btw.
I use Debian 6 as my main distro, installed on partition 1 (sda1) on my laptop. After installing a second distro on sda2 everything still worked fine and both distros show up on the boot up screen. After installing a 3rd distro on sda3; suddenly my cursor (in Debian) is frozen and I can't use either the touch-pad or the 'left and right clickers'. It seems unlikely that this would have anything to do with installing another distro but on the other hand it is a bit of a coincidence...or? The cursor works on the 2nd OS. The 3rd has not yet showed up on the boot screen (I want to do a 'update-grub from within Debian)
I'm in somewhat of a sticky situation. ssh has just randomly stopped working on my server after a power failure. Everything else that doesn't rely on ssh is still working fine though. It can still receive mail and everything, just no ssh.Background on the server, running debian etch on a PPC machine.ssh is (supposed to be) running on port 2000. Even if I am physically logged into the machine I can't log in with ssh -p 2000 user@127.0.0.1. I can ssh to and from any other machine on my network (the server can even ssh into another machine). So it isn't my network causing issues.It seems like the port 2000 is completely closed, if nmap the server's IP address I get PORT STATE SERVICE
25/tcp open smtp 80/tcp open http 110/tcp open pop3
I did some mess with adobe flash player and now I have no soound on my Thinkpad T60.
root@debian:/etc/modprobe.d# dpkg -l|grep alsa ii alsa-base 1.0.25+3~deb7u1 all ALSA driver configuration files ii alsa-utils 1.0.25-4 i386 Utilities for configuring and using ALSA ii bluez-alsa:i386 4.99-2 i386 Bluetooth ALSA support ii libsox-fmt-alsa 14.4.0-3 i386 SoX alsa format I/O library ii libwine-alsa:i386 1.4.1-4 i386 Windows API implementation - ALSA sound module
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
Debian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
sometime ago i have setup a nice Debian FTP server. and left the company. everything was working fine for about 5 month, administrator was able to login to root, do changes and manage system, etc. Suddenly he told me that he cannot login via PUTTY, the root user and pass say Access Denied.Looked all over the web for at least a REASON, but did not find anything. I suggested to go and do passwd reset, via runLevel 1. i hope this helps him. But i am still curious why all of the sudden, in a locked down room, where only one person has access root get disabled.
I installed Jessie (8.1.0) and encountered a problem which is non-existent in Wheezy (7.8.0).
My shell is zsh and I use tmux both installed from packages, I use this zsh feature that when you type "ls /" and then hit "Tab" twice, it will present you a menu where you can select the directory you want navigating the menu with the arrow keys. It works fine out of tmux (in bare shell) but stopped working inside a tmux session. In bare shell you hit Tab twice and get into the menu, in tmux you hit Tab twice and it displays the table of suggestions but just keeps cycling suggestions (cycling directory names) and not sending me to the menu.
Here's some screenshots:
1) Working (no tmux): I hit tab twice and got in the menu.
2) Not working (in tmux): I hit tab twice and it just cycled directory names after "/"
t isn't in my config file, I tried without my .tmux.conf (with tmux set to default settings) and it still had no effect.
