Software :: Install On The Usb Hdd But Due To The Netbooks Not Having Cd Drives?
Feb 23, 2010
Its been quite some time since if had to post on here but I have been using linux this whole time and still loving it. Heres my new problem I have an Acer Aspire one netbook I installed Ubuntu 9.10 off of a usb hdd. Everything worked right off the bat including the wireless but after being on it for about a half hour I get a crash notice. Im sure that its the install on the usb hdd but due to the netbooks not having cd drives I cant burn a new iso. What I'm needing to know is that if there is anyway to fix this without reinstalling. Or if there is a way of downloading ubuntu and installing it with out the need for a cd drive. If more information is needed just let me know I'll be more than happy to post any more information needed.
View 2 Replies
ADVERTISEMENT
Jul 10, 2011
Which *netbooks* are known to work well with the newer versions of ubuntu/ netbook remix/ mint...
View 7 Replies
View Related
Jun 28, 2011
I have a Dell mini netbook Inspiron 1018, six-cell battery, 1 GB DDR3 RAM (specification).Which Linus distribution is best for you longer battery autonomy for my netbook.
View 14 Replies
View Related
Oct 3, 2009
Netbooks play embedded flash well but struggle with fullscreen flash playback on sites like BBC iPlayer. Fortunately, in Fedora it is pretty easy to change video mode to match the required resolution and get smooth playback.I tested this on an Acer Aspire One, but should work on most netbooks, even the original eeepc 701 can playback smoothly with a small mod to overclock the celeron to it's 900mhz potential (use eee.ko, it compiles in the latest kernels if you do sed 's/&proc_root/NULL/g' -i eee.c and sed '/owner/d' -i eee.c before running make)
View 2 Replies
View Related
Nov 14, 2010
I've been using Ubuntu for the past four years, but I recently bought a Dell Mini 1012, and while Ubuntu 10.04 is wonderful in every way, it is giving me quite poor results in terms of battery life, compared to Windows 7 which is also installed on the device. I have been able to get 4.5 hours out of Ubuntu,compared to the 8 hours I have been able to get with Windows 7 Starter. I have tried everything suggested here in order to get better battery life out of Ubuntu, but without success.I'm wondering if I might have better success with another distribution.Are there any Linux distributions available that can claim longer battery life than others, on netbooks and in general? This question can be answered objectively if it is backed up with hard data from based on benchmarks,
View 1 Replies
View Related
Mar 15, 2011
I'm trying to customise my netbook and my wlan is my only rock in the path of a fully open source supported netbook ... Plug and play in linux Here's what I need to swap/switch :
Toshiba Satellite A300 Wlan (Intel) <---> Emachines eM350 Wlan (broadcom-wl)
View 1 Replies
View Related
Jan 20, 2011
can i use the wifi on my 2 netbooks to share files between them ?
View 1 Replies
View Related
May 7, 2011
I have Samsung NP145 with intel atom n450
And this is what terminal says: 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Do graphical effects work on my netbook?
View 5 Replies
View Related
Feb 11, 2011
Is there any reasonable alternative to Smeegol/MeeGo for small laptops (exception made for Ubuntu)? I had a look to Android on Netbook but it doesn't really seem a serious option - to me (but may be i didn't catch its sense (?) ).Small footnote: I, for one, as a person which has to deal a lot with text, i need a device with a keyboard and as elegant and smart many tablets are i do not believe in a "Newton" + attached keyboard So, for mobile, Netbook or small laptop (subnotebook) are a must. And i'd like a - linux based - surface which optimzes the screen space and ressources.
View 9 Replies
View Related
Dec 30, 2010
In a nutshell, it outlines a rather daft snag when running Ubuntu (10.04 and on) with regards to strange and quite frankly ludicrous wireless behavior concerning RaLink cards in Asus netbooks. The M.O. of a netbook is portable netz, yet it seems ENTIRELY impossible with this hardware setup Any geniuses care to have a stab? All outputs are included in the original post.
View 1 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
Jan 15, 2011
I just built a new system which has 4 SATA 3 Drives and 2 SATA 6 drives. The motherboard is an Asus P6X58D Premium which has 2 SATA 6 ports through a Marvel controller.I have Windows 7 loaded on one of those SATA 6 drives and it recognizes and boots fine. My intent was to load openSUSE 11.3 on the other SATA 6 drive all by itself and then use the SATA 3 drives as other file systems. When I go to install, the only drives that the openSUSE installer sees are the 4 SATA 4 drives, the SATA 6 drives do not appear at all. Note that when the system boots from the DVD the load of the Marvel Controller says IDE Passthrough Mode and displays those two drives. So how do I get openSUSE to see those drives so I can install and setup Grub to boot from there. I'm afraid if I install to just the SATA 3 drives, then I'll never get to Windows 7 again (should I ever need it ) without much gyrations. I've also tried booting from gparted-live and it does not see them either.
View 9 Replies
View Related
Mar 15, 2011
Some posts say 11.3 and newer automatically detect drives that have 4kb sectors, and partition things accordingly. But other recent posts specifically about 11.4 say, no, you still have to prepare the drive manually before installing, to be sure things are optimized.
View 9 Replies
View Related
Sep 7, 2010
I just purchased an HP HPE-210f (AMD Phenom II quad core). I would like to run Win7 and Ubuntu side by side. However, at step 4 of the installation (from USB drive) where the installer is trying to repartition the drive, the installer does not seem to recognize the disk... very odd. I've never had this problem before installing Ubuntu. The drive does not "show up" on the list of possibilities. There is simply nothing there!
View 9 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Jan 18, 2010
I'm breaking into the OS drive side with RAID-1 now. I have my server set up with a pair of 80 GB drives, mirrored (RAID-1) and have been testing the fail-over and rebuild process. Works great physically failing out either drive. Great! My next quest is setting up a backup procedure for the OS drives, and I want to know how others are doing this.
Here's what I was thinking, and I'd love some feedback: Fail one of the disks out of the RAID-1, then image it to a file, saved on an external disk, using the dd command (if memory serves, it would be something like "sudo dd if=/dev/sda of=backupfilename.img") Then, re-add the failed disk back into the array. In the event I needed to roll back to one of those snapshots, I would just use the "dd" command to dump the image back on to an appropriate hard disk, boot to it, and rebuild the RAID-1 from that.
Does that sound like a good practice, or is there a better way? A couple notes: I do not have the luxury of a stack of extra disks, so I cannot just do the standard mirror breaks and keep the disks on-hand, and using something like a tape drive is also not an option.
View 4 Replies
View Related
Jun 9, 2011
so I setup a raid ten system and I was wondering what that difference between the active and spare drives is ? if I have 4 active drives then 2 the two stripes are then mirrored right?
root@wolfden:~# cat /proc/mdstat
Personalities : [raid0] [raid10]
md1 : active raid10 sda2[0] sdd2[3] sdc2[2] sdb2[1]
[code]....
View 2 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
Oct 18, 2010
I suspect this is not new but I just can't find where it was treated. Maybe someone can give me a good lead.I just want to prevent certain users from accessing CD/DVD drives and all external drives. They should be able to mount their home directories and move around within the OS but they shouldn't be able to move data away from the PC. Any Clues?
View 2 Replies
View Related
Jan 28, 2010
i have recently setup and installed Ubuntu 9.04 on a virtulal drive usingVMWare 6.04, installed the desktop gui as well, I need to add other drives for data and loggng, which I did in the VMWare side. I can see the 2 drives in ubuntu, but can not access them, I get he unable to mount location when I try. How can resolve this please as I need these to virtual drives to be used as data drives.
View 1 Replies
View Related
May 1, 2011
I've used it once before but got fed up with the boot asking me everytime I turned my laptop on because I wasn't using it enough. I have Windows 7 on drive C . I want to keep it on drive C. I have several 1.5TB+ drives, and one of them is not being used. I want to dedicate it to Ubuntu, and be able to do a dual boot with my Windows 7 install. Is this possible? If it is, what about when this drive is not connected to my laptop? Will that mess up the boot process?
View 2 Replies
View Related
Jan 8, 2010
So, at the moment I have a 7TB LVM with 1 group and one logical volume. In all honesty I don't back up this information. It is filled with data that I can "afford" to lose, but... would rather not. How do LVMs fail? If I lose a 1.5TB drive that is part of the LVM does that mean at most I could lose 1.5TB of data? Or can files span more than one drive? if so, would it just be one file what would span two drives? or could there be many files that span multiple drives drives? Essentially. I'm just curious, in a general, in a high level sense about LVM safety. What are the risks that are involved?
Edit: what happens if I boot up the computer with a drive missing from the lvm? Is there a first primary drive?
View 10 Replies
View Related
Jul 5, 2011
I have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies
View Related
Aug 23, 2010
I have an email server that I think is about to have a hard drive fail. It is running an old install of Redhat 9.0 I think. It has 2 120gb hard drives mirrored as a raid1. I want to copy those to a new pair of 500gb hard drives again as the same disk raid1 mirror. What tool would work for this? DD or partimage? Would it all be exactly the same and boot up still?
View 3 Replies
View Related
Dec 16, 2010
I downloaded the KDE openSUSE live-cd image and I burnt it on a CD and two different flash drives (using the dd command, as intended) and my computer freezes even before it boots the live cd/usb, at the bios laptop welcome screen (where you access the boot menu etc.)
I have an HP 6735b: ATI Radeon HD 3200, Broadcom wireless card. How could I fix this?
View 8 Replies
View Related
Feb 22, 2011
I just got OpenSuSe 11.3 installed in a machine with two 160GB drives. I took all defaults at installation, works fine. Going to YaST expecting to detect and partition it. Not there. System Information, however 'sees' both disks. How do I partition and attach this disk?
View 9 Replies
View Related
May 2, 2011
I have an old computer where i tried to install openSUSE 11.4 today. While installing it showed some error regarding like ntfs drive mounting... i skipped those messages. But now no ntfs drives are are available in openSUSE. Is there any way to get those drives back?
View 1 Replies
View Related
Dec 9, 2010
I'm trying to install 10.10 to my home desktop that has Win xp. I have one ide hd with only windos on it and I have a sata hd partitioned logically for linux. The sata controller is a via chip on an old Abit mobo. The live cd works great but when I run the install and get to the partitioning, my sata disk becomes sda instead of sdb. From the live cd, gparted shows the sata as sdb. From live, "cat /proc/partitions" shows the sata disk as sdb. But during install gparted shows it as sda. The install will go on the correct drive, but I'm not sure where to put grub2. On another distro install, I left it at mbr, and it went to the sata mbr. Should I just install grub to the ide disk which will become my "sda" at boot? Will grub find ubuntu on the sata disk, which will become sdb?
View 1 Replies
View Related
Sep 1, 2011
I am doing a new build with an SSD / HDD combo, and I am wondering, is there a way I can install Ubuntu spread across both drives? I know I can do this in Fedora, but I haven't seen much of a feature like this in Ubuntu.
View 9 Replies
View Related
