i am facing very big problem to booting the fedora 10. i installed NVIDIA based graphic drivers and rebooted the machine.after rebooting the screen is showing the line like this
Clocksource tsc unstable(delta = -75444992 ns)
how to over come above error and how i can boot my fedora normally like previously.
I newly made clean installation of Ubuntu 10.04 and I previews had Ubuntu 9.10 installed. When I made clean installation of Ubuntu 10.04 and looked into syslog, dmesg and kern.log I could see clocksource tsc unstable and CE: hpet increasing min_delta_ns. In every boot.
Here is some information:
[ 0.176965] ACPI: Interpreter enabled
[ 0.176974] ACPI: (supports S0 S3 S4 S5)
[ 0.176998] ACPI: Using IOAPIC for interrupt routing
[ 0.180063] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.183061] ACPI: Power Resource [FN10] (off)
[Code]...
We are working on ubuntu10.04. Currently it is using jiffies as a clocksource. We want to set it to TSC. How should we proceed ? Also we are working on libpcap and we want to enhance it for that we want to enable MMAP support. How should we do that?
View 2 Replies View RelatedIndex of /update/11.2/rpm/x86_64
kcalc-4.3.5-0.1.1.x86_64.rpm
kcharselect-4.3.1_4.3.5-3.4_0.1.1.x86_64.delta.rpm
Through update you can get kde 4.3.5 dont think this is normal or is it ?
How can I see the list of files - e.g. patched files - of a delta RPM file ? I can convert the drpm file into a cpio archive with rpm2cpio tool but cpio -i produces a Malformed number along with scrambled characters in the output.
View 2 Replies View RelatedI've joined this forum because I couldn't find any answer anywhere else by searching the internet. I've installed a F10 64-bit default installation (with updates until 25 Feb. 2009), using nvidia latest proprietary driver, pulseaudio, kde4, proprietary flash 10 beta 64-bit plugin with firefox. When I play music on Myspace the sound dropouts randomly each 3 to 30 seconds when using my M-Audio Delta 66 soundcard.
I'm using the same configuration in F8 without this problem. After login (in F10) and some other times I also have a Kernel failure message: ALSA sound/core/pcm_lib.c:154: BUG: stream = 1, pos = 0xaaa, buffer size = 0xaaa, period size = 0xaaa I don't know if it has got anything to do with the dropouts. There are no messages in /var/log/messages when the dropouts occurs.
[Code]...
I have noticed that the updates to my f12 64bit systems are running longer due to the fact that fewer fedora updates are delta rpms. Why is this. I know that rpmfusion updates and other third party updates are not covered.
View 9 Replies View RelatedThe following packages have no delta rpms in 11.2: acroread - Adobe Reader ,java-1_6_0-sun, java-1_6_0-sun-plugin, Opera Web Browser, flash-player A quick check on 11.0 and 11.1 update repos shows that there are delta rpms for latest acrobat reader, sun java and opera updates. Is this a new Novell/openSUSE policy and has there been an anouncement made to inform users.
View 7 Replies View RelatedWe install a Maudio delta 66 card on a ubuntu 9.10 karmic. We try to run alsaconf and the system say invalid command. We need to let it work..
View 1 Replies View RelatedI currently mirror the updates repository to my computer using rsync. I was wondering if I could save space and bandwidth by only rsyncing the .delta.rpm files? Are there any disadvantages to this or does zypper/YAST handle updates just fine with it?
View 3 Replies View RelatedI am using m-audio delta 1010 ( break out box) works perfect with opensuse 11.1 and 11.2 but is is not on the hardware compatiblitiy list. How to add? it is using alsa-tools.
View 1 Replies View RelatedI'm pretty much an Ubuntu noob and I'm about to give up. I've spent hours reading tips and tricks to get this sound card working but I usually end up making things worse. This will be my last attempt
- onboard sound is disabled in BIOS
- Delta 1010LT is recognized
- fresh Ubuntu 10.04 32bit install . . . everything is default.
- I know how to access the terminal and for argument's sake, let's say that's it. I need step by step.
I tried to remove all instances of pulse audio in the past and it removed the desktop as well. Talk about frustrating. Ok, so here I am. Fresh install, no sound and I haven't touched a thing.
I'm not too experienced on Ubuntu, but I'm trying to get a Delta 1010LT working on Ubuntu 10.04 minimal install (no gnome, only console).I can see the board detected using lspci, but looking at dmesg output I get the following:
Code:
[ 31.116668] ICE1712 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 31.116709] ice1712: Using board model M Audio Delta 1010LT
[ 31.135560] invalid CS8427 signature 0x0: let me try again...
[code].....
if a change the model to delta1010 the driver is loaded correctly, but I assume there are major differences between the two boards so I don't get audio out, even if I unmute everything using alsamixer.Motherboard is an Intel D510MO with onboard audio disabled.
How to play Rise of Nations thrones and patriot, Delta Force Black hawk Down and other games in ubuntu 11.04?
View 1 Replies View RelatedI just bought an M Audio delta 44 soundcard, and am not sure how to get it set up properly. I realize it's primarily a recording card (and that's what i bought it for) but ideally I'd like to use it for all sound functions on this computer and throw my crappy Audigy card away. What I need to figure out is how I can route left and right stereo sound to two of the mono outputs on the D44 (for instance, output 1 might be left and output two could be right). Does anyone have any experience with these cards?
View 2 Replies View RelatedI have a big iso image which is currently being downloaded by a torrent client with space-reservation turned on: that means, file size is not changing while some chunks in in (4 Mib) are constantly changing because of a download.
At 90% download I do the initial rsync to save time later:
$ rsync -Ph DVD.iso /media/another-hdd/
sending incremental file list
DVD.iso
[Code]....
Then, when the file's fully downloaded, I rsync again:
total size is 2.60G speedup is 1.00
Speedup=1 says delta-transfer was not used, although 90% of the file has not changed, target dir is on another FS and copying takes several minutes. Why doen't it try to speedup the transfer?! How can I force rsync to use delta-transfer?
I'm using 64bit Ubuntu 9.10 and my sound card is not working. I'v tried to install oss drivers, but there is no effect.
View 1 Replies View RelatedI encounter many problems, the most pressing now is the lack of my Ubunto-PC to make use of my M-Audio Delta 1010 LT Soundcard. I installed ALSA package yesterday, but there's still no sign of my Soundcard to be found. sudo aplay -l delivers: aplay: device_list:223: keine Soundkarten gefunden ... (no soundcards found)
[Code].....
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedHas anyone else experienced problems with KVM in the last few days?
I've been running KVM VMs for the last year. Until sometime in the last few days they've been working fine. I have three F13 systems that I'm running KVM on, an iCore7 with a CentOS5.5 VM, a Core 2 with a CentOS5.5 VM and another Core2 with an XP VM. I haven't seen any problems with the iCore7 system but the two Core2 systems are both exhibiting serious problems.
The CentOS VM is hanging. I can ping it but I can't ssh into it anymore. Prior to that state I was able to ssh in put I couldn't do a ps. Eventually I couldn't ssh in anymore. This is repeatable, I've rebooted the system a couple of times and restarted the VM, it always crashes in the same way.
The XP VM is running but the networking is behaving strangely. Basic networking is working but I can't access the Workgroup although I can access network mounted SAMBA shares that I had previously setup. This could be a SAMBA issue but it started happening at the same time as my other problems.
Another problem that I had was that the virtual disks on multiple VMs on both systems became unbootable. I was able to fix this by removing the disks and then adding them back.
I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
View 9 Replies View RelatedIn one of the last KDE 4 updates, or perhaps when moving from intrepid to karmic, using the application "clusterssh" has become completely unstable. Some of the symptoms I have experienced:
1. Window focus problems. Clicking on a single xterm window from a group of xterms controlled by clusterssh does not switch focus to that window. Focus stays on the clusterssh application, so output is still directed to all xterms. Previously, I could interact with a single xterm, or with all of them.
2. Clipboard problems. After using clusterssh for awhile, and perhaps using the clipboard within clusterssh cutting and pasting between other applications completely fails. The only work-around is to completely log out of your kde session, hence killing your clusterssh sessions.
3. xterm window manipulation. At some point during a clusterssh session, all xterm windows become locked in place. You can't move them at all. This also leads to focus problems described above. The work-around for this is to switch virtual desktops, and then switch back to your clusterssh session, and now the windows can be manipulated and re-organized again.
I have a Linux box with Ubuntu 10.4 that I use basically to play music and download files. It doesn't have a monitor or keyboard, the only way I access it is using Ultra VNC. Yesterday, the automatic update service offered to update Vino (among other things) to version 2.28.2 and, as usual, I accepted.
After the update Ultra VNC has had trouble negotiating the protocol with Vino. The only way I got it to work was to force using Tight as the compression method, which provides a crappy image quality. Besides that, at some unexpected moment, the connection just dies.
Can anyone help me to:
1.- Solve this issue with the current Vino version or
2.- Go back to the previous version that was working perfectly.
What is the recommended way to do updates when running sid (especially those involving updates of xorg or desktop environments as they should not be running at that time)? I imagine this would be safe:
1. # apt-get update
2. # apt-get dist-upgrade -d
3. Switch to a text mode terminal (say, tty1).
4. # /etc/init.d/kdm stop
5. # apt-get dist-upgrade
Or simply using init 1.
I just upgraded from Debian 8.1 stable to testing and finally to unstable, looking for latest software.However, I cannot find sources for security or software updates, the only repository that works from me is
Code: Select allhttp://ftp.debian.org/debian/ unstable main.
I am using some unstable set of kde packages with opensuse 11.2-i586, at the moment the version number is
KDE 4.4.62 (KDE 4.5 >= 20100203).
That I have these packages is due to some misconfiguration / error, and I would like to replace them with something stable, say kde 4.4.1. I had a look into yast, found an option like "use these (kde 4.4) packages as system packages", but run into numerous compatability issues afterwards so that I can't make the switch.
So my question is: How can I replace the unstable kde 4.5 packages with kde 4.4.1? I don't know suse very well, so if there is some step-by-step description available somewhere
I seem to be having problems with karmic and perhaps GRUB2 sometimes when the computer boots after the GRUB2 screen I get a flashing cursor (underscore) and nothing happens. I end up having to hard reset. other times I'm using karmic and everything seems ok and then it suddenly freezes. I haven't been able to find a reason. Memtest seems ok too. which log file is likely to show me where things went wrong?
View 9 Replies View RelatedMy update manager tells me 10.10 upgrade is available,
I klick, and it says:
I thought that the STABLE version should be out by 2010-10-10?
I tried to change the server from sweden to main, but same unstable 10.10
Why is Ubuntu slower and more unstable than Fedora on my laptop? I thought, as it is a more popular distro, it wouldn't be. I've only used it on my laptop for a couple of days and I already had at least 3 default software crashes. On Fedora, I had about one crash per two weeks. Ubuntu is also slightly slower. Opening the Social broadcast messages window took so long to open, that meanwhile, I totally forgot that I opened it.
View 6 Replies View RelatedI want to use linux instead of windows to create my videos, but all the video editors are so unstable that they are not possible to use at all.At first I Thought it was my hardware or something but I tried on my laptop as well. They all crash randomly every time I try to do stuff.I have tried OpenShot, VLMC, Pitivi, OpenMovieEditor, Avidemux, Kino, LiVES, Cinelerra and Kdenlive.How come I never have problems like this in windows?I know Linux sometimes sucks when it comes to brand new hardware, but seriously though. All the video editors are crashy.
View 9 Replies View Related