My update manager tells me 10.10 upgrade is available,
I klick, and it says:
I thought that the STABLE version should be out by 2010-10-10?
I tried to change the server from sweden to main, but same unstable 10.10
Trying to move from squeeze to unstable -- my downloads add up to some 700 M or so.So I am trying to batch the upgrade:Some of the big-fellas are openoffice and texlive:So I didsudo aptitude hold '?name(openoffice)'sudo aptitude hold '?name(texlive)'Is that fine or are there some pitfalls to this?
View 5 Replies View RelatedI recently upgraded from Debian Lenny to wheezy (testing). I use a popular 3G modem, the Huawei E220. In Lenny everything worked fine. I use wvdial to connect and the script from lenny, which worked just fine.Unstable behaviour goes like this:I connect, pppd starts, then, either immediately or after a few seconds, the modem hangs up (pppd errorcode 16). Upon retry a SIM Error is being thrown or the /dev/ttyUSB0 node vanishes. Un/Re-plugging the modem and dialing again results in a working connection (mostly). Is there any possibility finding out why the modem hangs up (because a web research revealed that there are a million possibilities for this behaviour)?
View 1 Replies View RelatedSince I upgrade to Ubuntu 10.04 my wireless connection is very unstable. I install the needed wireless drivers from 'Hardware Drivers' (Broadcom STA wireless driver) and I got wireless connection, but it randomly disconnect, and also connection is very slow.
I think that the problem are the drivers which are not very compatible with this version of Ubuntu, which means we need to wait for update? I have HP ProBook 4510s laptop, Intel PRO/Wireless 5100 AGN network card & Gembird NSW-R2 router. I'm only having this problem on Ubuntu 10.04, on other OS's the internet is fine.
I dist-upgraded my Debian unstable and 'cups' removed the official drivers ('cndrvcups-common_2.00-2_i386' and 'cndrvcups ufr2-uk_2.00-2_i386'). Well, now my network Canon i-SENSYS MF4120 multifunctional printer/scanner doesn't work and the drivers can't be installed back
View 11 Replies View RelatedI've been running Ubuntu on an IBM Thinkpad T42 for about 3 years and have never had any instability but my Meerkat upgrade 10.10 about a week ago has never been right and seems to be getting worse. It's almost impossible to use the Internet. Whether Epiphany or Firefox, the screen keeps going grey and regularly freezes the computer completely so that NO keyboard commands work and only a hard restart will do. I also have problems streaming audio feeds with RP 11 or VLC. VLC is more of a problem which I find odd as it is solid in Windoze.
PS The instability isn't only Internet related. There are lots of strange little things like authentication windows not closing after I enter password and hit Enter or click OK, not being able to paste in Terminal (sometimes not others), toolbard in apps appearing differently sometimes, stuff like that.
Does ANYONE have a stable dual boot Win7 & Ubuntu 10.04 system? I have been trying for WEEKS to get a computer configured for my student lab. I get things going and everything seems to work for a few days. And then for no reason, the next time I reboot, Grub just seems to commit suicide.
Latest example. Win 7 & Ubuntu have been co-existing perfectly fine for about a week. Iow, I do something, then reboot, and the grub menu comes up - I select something and it boots my OS of choice for that session.
But today, I've been putting the last few touches on this computer before I use Clonezilla to copy it to all of the computers in the lab. You know - hard stuff like:
* set the default profile in Windows
* install a printer in both Ubuntu & Windows
* set a background image for the logon screens that have our "don't do anything bad" policy.
how there is nothing in there that should mess w/ grub or the boot loader, right? Yet I reboot the computer, I get to where grub should load - and BARF - I get the Bios splash screen again and the computer reboots on it's own. What the !@(#$&!@#$% is going on that this keeps happening to begin with?
Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
Im new to the forum and to Ubuntu. I have a HP 'tablet' laptop which has no operating system installed and I was hoping to install Ubuntu. I downloaded ubuntu and the software to make it possible to boot from usb. I started the laptop up selected the option to boot from the usb. But now it says "marking TSC unstable due to TSC halts in idle" and then on the next line it says "switching to clocksource hpet" and it has been like this for hours. The laptop specs are: Intel Core 2 CPU T5600 @ 1833MHz with 1GB of RAM.
View 3 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies View RelatedI am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
In one of the last KDE 4 updates, or perhaps when moving from intrepid to karmic, using the application "clusterssh" has become completely unstable. Some of the symptoms I have experienced:
1. Window focus problems. Clicking on a single xterm window from a group of xterms controlled by clusterssh does not switch focus to that window. Focus stays on the clusterssh application, so output is still directed to all xterms. Previously, I could interact with a single xterm, or with all of them.
2. Clipboard problems. After using clusterssh for awhile, and perhaps using the clipboard within clusterssh cutting and pasting between other applications completely fails. The only work-around is to completely log out of your kde session, hence killing your clusterssh sessions.
3. xterm window manipulation. At some point during a clusterssh session, all xterm windows become locked in place. You can't move them at all. This also leads to focus problems described above. The work-around for this is to switch virtual desktops, and then switch back to your clusterssh session, and now the windows can be manipulated and re-organized again.
I newly made clean installation of Ubuntu 10.04 and I previews had Ubuntu 9.10 installed. When I made clean installation of Ubuntu 10.04 and looked into syslog, dmesg and kern.log I could see clocksource tsc unstable and CE: hpet increasing min_delta_ns. In every boot.
Here is some information:
[ 0.176965] ACPI: Interpreter enabled
[ 0.176974] ACPI: (supports S0 S3 S4 S5)
[ 0.176998] ACPI: Using IOAPIC for interrupt routing
[ 0.180063] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.183061] ACPI: Power Resource [FN10] (off)
[Code]...
I have a Linux box with Ubuntu 10.4 that I use basically to play music and download files. It doesn't have a monitor or keyboard, the only way I access it is using Ultra VNC. Yesterday, the automatic update service offered to update Vino (among other things) to version 2.28.2 and, as usual, I accepted.
After the update Ultra VNC has had trouble negotiating the protocol with Vino. The only way I got it to work was to force using Tight as the compression method, which provides a crappy image quality. Besides that, at some unexpected moment, the connection just dies.
Can anyone help me to:
1.- Solve this issue with the current Vino version or
2.- Go back to the previous version that was working perfectly.
I seem to be having problems with karmic and perhaps GRUB2 sometimes when the computer boots after the GRUB2 screen I get a flashing cursor (underscore) and nothing happens. I end up having to hard reset. other times I'm using karmic and everything seems ok and then it suddenly freezes. I haven't been able to find a reason. Memtest seems ok too. which log file is likely to show me where things went wrong?
View 9 Replies View RelatedWhy is Ubuntu slower and more unstable than Fedora on my laptop? I thought, as it is a more popular distro, it wouldn't be. I've only used it on my laptop for a couple of days and I already had at least 3 default software crashes. On Fedora, I had about one crash per two weeks. Ubuntu is also slightly slower. Opening the Social broadcast messages window took so long to open, that meanwhile, I totally forgot that I opened it.
View 6 Replies View RelatedI want to use linux instead of windows to create my videos, but all the video editors are so unstable that they are not possible to use at all.At first I Thought it was my hardware or something but I tried on my laptop as well. They all crash randomly every time I try to do stuff.I have tried OpenShot, VLMC, Pitivi, OpenMovieEditor, Avidemux, Kino, LiVES, Cinelerra and Kdenlive.How come I never have problems like this in windows?I know Linux sometimes sucks when it comes to brand new hardware, but seriously though. All the video editors are crashy.
View 9 Replies View Relatedafter a while, all my menus that pop up on Firefox 4 become unstable. When I go to click on the "file", "edit", "view", etc. buttons, they never stay when I go down the list. Also when I right click, the list will not stay either.
This is a bug that needs to be reported, so I am reporting it now. Hopefully we can get this problem fixed in the next update
I have run Ubuntu on my laptop for several months. The last few weeks for an unknown reason when I click on something(nothing that seems related)I start getting many notification on the bottom panel and it just continues until I shutdown my computer but pushing down the off switch, the only way to stop it.
I have tried computer janitor and only get an error message that it can't run because it thinks synaptic or another item is running when it is not. I am TOTALLY lost when it comes to fixing issues in Linux but I like it and want to keep it on my hard drive. Where to start and remember I am an idiot when it comes to Linux.
Also some program's seem to crash for no apparent reason.
I'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?
View 7 Replies View RelatedI would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies View RelatedHas anyone else experienced problems with KVM in the last few days?
I've been running KVM VMs for the last year. Until sometime in the last few days they've been working fine. I have three F13 systems that I'm running KVM on, an iCore7 with a CentOS5.5 VM, a Core 2 with a CentOS5.5 VM and another Core2 with an XP VM. I haven't seen any problems with the iCore7 system but the two Core2 systems are both exhibiting serious problems.
The CentOS VM is hanging. I can ping it but I can't ssh into it anymore. Prior to that state I was able to ssh in put I couldn't do a ps. Eventually I couldn't ssh in anymore. This is repeatable, I've rebooted the system a couple of times and restarted the VM, it always crashes in the same way.
The XP VM is running but the networking is behaving strangely. Basic networking is working but I can't access the Workgroup although I can access network mounted SAMBA shares that I had previously setup. This could be a SAMBA issue but it started happening at the same time as my other problems.
Another problem that I had was that the virtual disks on multiple VMs on both systems became unbootable. I was able to fix this by removing the disks and then adding them back.