Software :: X11 Initializartion Failed Error After Crash?

Sep 28, 2010

I was running Linux Ubuntu 10.4 and used my Firefox browser to find info on osteoporosis for my wife. I entered the following search string in Google search: osteoporosis reclast problems. At the very top of the returned results page was a sponsored result with a simple link: Reclast.com (WOT had it flagged with a green=OK icon). I clicked on it and immediately a bizarre page appeared. It said that my computer was infected with a long list of various viruses and malware. Several of its child windows were flashing and, most strange, one of its windows had a progress bar and said it was searching my Windows c:/... directory. I don't remember the whole pathname, but it included the words "..user" and "Microsoft". This I interpreted as very suspect since, when running Ubuntu, there is no such directory, although I do have Windows XP installed on its own partition so I can dual-boot.

The warning page also insisted that I needed to click on a link it provided that it stated was necessary to fix the problem. I didn't do that, because at this point I suspected that this was a dangerous page and I would possibly be inviting some malicious downloads if I followed the instructions and clicked the offered link. Instead, I used a kill utility to kill the entire Firefox browser ap. Firefox went away and I then ran Firefox again. The same warning page immediately appeared. Again I killed Firefox. I then decided to reboot Ubuntu to see if that would correct the problem. That's when things got worse.

I have a dual-boot system with Windows XP, Ubuntu 9.10 (2 kernels available), and Ubuntu 10.4 (3 kernels available), with recovery mode choices available for all the Ubuntu kernels. When I tried to reboot, the grub menu appeared like normal. But when I selected my default Ubuntu 10.4 choice, the boot process seemed to run normally but stopped at a splash page with a violet background and "Ubuntu" in large type with the five dots below. And it stayed there; the boot process never continued. The first time this happened, it did do a fsck of the HD, but then stayed hung at the splash screen. I tried to reboot again several times, but got the same result, except there were no more fsck checks that ran. I even left my computer on all night, in case the boot process was doing some type of lengthy processing in the background. Eight hours later, it was still stuck at that same splash screen. I tried booting into the other grub choices. Windows booted completely normally. I ran a complete virus scan while booted into Windows, which found nothing wrong. I then tried booting into my Ubuntu 9.10 choice. It also booted completely normally (which is how I'm writing this post). However, ALL of my three Ubuntu 10.4 menu selections hang at the Ubuntu splash screen I described above.

Next I ran the recovery mode menu choice for my Ubuntu 10.4 kernel. That worked OK. While using that, I ran the utility to repair all packages, which seemed to rebuild everything. I also ran the choice to update grub, which seemed to run OK. Still, I was unable to get past the frozen splash screen when I tried to boot my 10.4 kernels. Finally, I highlighted the Ubuntu 10.4 menu choice and pressed (e) to edit it. I removed the "quiet splash" options and then tried to boot. Much processing went by on a text screen and, in a short time, I was left at a login prompt on a terminal. I was able to login OK and the terminal mode seemed to work fine. I checked around and all the file system seemed to be there OK. But no GUI (it normally boots into the Gnome desktop).

Booting again into my Ubuntu 9.10 choice, I confirmed that the entire 10.4 file system is there and appears normal. I can access all the files and all of my data is still there intact. From the terminal I tried running several commands. (I also have the KDE desktop installed, although I normally work with Gnome). One possible clue to the problem is, when I tried to run Konsole from the terminal command line as a test, I got the following message:

Code:
KUnique Application: Cannot find the D-Bus session server: "/bin/dbus-launch terminated abnormally with the following error: Auto launch error: X11 initialization failed" I checked and found that there is no "/bin/dbus-launch" file in either of the 9.10 or 10.4 filesystems, which seems strange. It seems that, since that bizarre virus warning page and my kill of Firefox and a reboot, the boot process fails to initialize the GUI mode. I have no idea why this is so, and my multi-boot system had been working fine for a long time.

View 1 Replies


ADVERTISEMENT

OpenSUSE Install :: Crash During Update - RPM Failed Error

Jan 1, 2011

So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.

Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?

I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.

Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....

The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.

View 9 Replies View Related

OpenSUSE :: Subprocess Failed - Error: RPM Failed: Error: Failed Dependencies

Mar 31, 2010

When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome

[code]...

View 4 Replies View Related

Server :: Skipping Failed Dependencies Error / Rpm -u /packages Recieve A Failed Dependencies Error?

Nov 2, 2010

I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps

View 10 Replies View Related

OpenSUSE Install :: Subprocess Failed. Error: RPM Failed: Installing Package Xen-4.0.0_21091_06-0.1.1.x86_64?

Oct 14, 2010

Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.

View 1 Replies View Related

OpenSUSE :: Management - Update - Install Or Remove A Package - Subprocess Failed. Error: RPM Failed: Rpmdb: PANIC: Invalid Argument

Apr 9, 2010

Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.

[Code]....

View 4 Replies View Related

Server :: Install Symantec Endpoint - Error: Unpacking Of Archive Failed On File - Cpio: Mkdir Failed - No Such File Or Directory

Nov 23, 2010

i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory

View 3 Replies View Related

OpenSUSE Install :: Errors "Subprocess Failed. Error: RPM Failed" When Installing Updates To 11.3

Mar 5, 2011

When I try to run the Online Updates to the system through Yast I get the following errors for each package:

[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...

View 3 Replies View Related

Debian :: Error - Fetch Failed: W:Failed To Fetch Bzip2:/var/lib/apt/lists/partial

Feb 13, 2011

Lately when I've tried to update my packages many of them don't update. I get nothing out of the ordinary when using the terminal but when I try to update via the Update manger I get this error message:

Code:
Error message:
Fetch failed: W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_source_Sources Hash Sum mismatch
W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_binary-amd64_Packages Hash Sum mismatch, W:Failed to fetch http://mirror.steadfast.net/debian/dists/testing/updates/main/source/Sources 404 Not Found [IP: 208.100.4.53 80]

[Code]...

I've tried several different mirrors but get the same error with every one. Same result with ftp as well. Yesterday I upgraded to Wheezy and every package successfully upgraded, but today the problem started again.

View 10 Replies View Related

Fedora Servers :: Error In Updating System Using Yum - Failed To Use Search Generator - Error 256

Aug 26, 2009

when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.

View 2 Replies View Related

OpenSUSE :: Updated 10.3 To 11.4, Mysql Error Failed To Alter Database Error: 1102?

May 17, 2011

I upgraded a system from 10.3 to 11.4 and I get the following error when trying to run mysql:

Will update MySQL now, if you encounter any problems, please read following file:
/usr/share/doc/packages/mysql-community-server/README.SuSE
Log files inconsistency, please merge following files manually:
/var/lib/mysql/mysqld.log
/var/log/mysqld.log

How can I correct this? Mysql will not start so I can not run any of the utilities.

View 2 Replies View Related

OpenSUSE :: Error: RPM Failed: Error: Package Kwin-4.3.5-0.2.1.i586 Is Not Installed

Jun 14, 2010

I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:

Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.

View 5 Replies View Related

Ubuntu Networking :: Error - Vendor Request 0x06 Failed For Offset 0x3040 With Error -110

Feb 12, 2011

Having a problem with my Belkin wireless adapter when trying to stream music to my Pinnacle Soundbridge.The network connection is usually rock steady but drops anywhere between and few second and a few minutes after streaming music. Network manager still shows the connection to my home network as active but it is not. The connection comes back when I unplug the dongle and plug it back in. I found the following message repeated in the syslog

phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110

Only thing I have noticed is that it refers to rt2x00 when I had thought it used the rt73usb driver.Had the PC and the Soundbridge for a number of years without any problems but I did recently have to reinstall Ubuntu from scratch. Currently running Ubuntu 10.10

View 4 Replies View Related

Fedora :: Crash In Mono-core-2.4.2.3-2.fc12 Error?

Nov 24, 2009

i recently installed the banshee media player using yum extender. Everytime i run it i get this error " a crash in mono-core-2.4.2.3-2.fc12 has been detected" how can i fix this problem?

View 2 Replies View Related

Fedora :: System Crash Then Read Error At Boot?

Feb 23, 2011

I tend to get constant crashes when using internet browsers ( Google Chrome and Firefox ) basically the application hangs not moving in any way, then eventually completely freezes up, the system then locks up and finally crashes.

Upon system re-start I get "Read Error" at boot ( No further information, it literally just says "Read Error" ).

It is sometimes fixed by going into the BIOS and select "Hold on No Error".

I tried installing OpenBios to see if using different BIOS firmware would resolve the issue, but the OpenBios install failed ....so no dice there either.

I am trying to work out if it is a hard drive problem or if it is purely a problem with Fedora.

It was working fine for a couple of months and when it does boot up ... the system works fine, ( Until another crash ).

It seems like the internet browsers crash the system and then the system crashes and can then no longer remember how to boot up.

what this could be that could be software based....if not it looks like I will need a new hard-drive.

View 5 Replies View Related

Ubuntu Installation :: Error While Installing Screenlets (after Pc Crash)

May 31, 2011

While I was installing screenlets via

Code:
sudo apt-get install screenlets

My pc restarted due to electricity cut off! and now when I try to re-install I get that error in terminal

Code:
dpkg: error processing python-numpy (--configure):
dependency problems - leaving unconfigured

[Code]....

View 3 Replies View Related

CentOS 5 :: Memory For Crash Kernel 0x0 To 0x0 Error Message

Jul 30, 2009

After CentOS5.3 install to /sdb7 partition (on 2nd HD) and using Ubuntu Grub(on 1st HD mbr) to boot CentOS, I get "memory for crash kernel 0x0 to 0x0 not within permissible range" as soon as CentOS starts. I have 2G of ram. The message is on every boot. I've had several other linuxes on that partition without such an error message. Otherwise the OS starts fine. Is the message of concern/import?

View 3 Replies View Related

Fedora X86/64bit :: Error Before Booting \ Error Message:IOMMU: Mapping Reserved Region Failed?

Feb 20, 2010

I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating

View 2 Replies View Related

Ubuntu :: Error - Failed To Save File ImageMagick Returned Error Code 11 Command Line

May 1, 2010

simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?

View 6 Replies View Related

Fedora Security :: Error: Image.jpg Has Failed To Upload Due To An Error

Nov 1, 2010

I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:

image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?

View 4 Replies View Related

OpenSUSE :: Error: RPM Failed: Error: Package Kbd-1.14.1-20.2.x86_64 Is Not Installed

Feb 26, 2010

Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed

php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed

patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery

[Code]...

View 6 Replies View Related

Fedora :: Evolution - Error While Sending Message. Failed To Append To : Unknown Error Appending To Local 'Sent' Folder Instead

Jan 28, 2011

When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.

View 3 Replies View Related

Ubuntu :: CodeWarrior Startup Crash - Getting Error On Running Cwide

Aug 5, 2010

I am a Ubuntu 10.4 Linux User (32 bits)! I installed the CodeWarrior Development Studio v10. The installation was OK. However, I am getting an error when I run cwide (see below). The problem seems to be in the library libpemicro_jloaderh.so.

A fatal error has been detected by the Java Runtime Environment: SIGSEGV (0xb) at pc=0xb17fb230, pid=2450, tid=2999868272 JRE version: 6.0_20-b02 Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing linux-x86 ) Problematic frame: C libpemicro_jloaderh.so+0x137230]

An error report file with more information is saved as: /home/alex/hs_err_pid2450.log If you would like to submit a bug report, visit: [URL]... The crash happened outside the Java Virtual Machine in native code. See problematic frame for where to report the bug.

View 3 Replies View Related

Software :: Error: Buggy GNU/libc (version 2.5 - 2.7) Present. VLC Would Crash

Dec 22, 2010

i am installing the software vlc-1.1.5.tar.bz2 on my red hat linux 5.0 after extracting & by firing the command ./configure on command prompt it shows following error & after configure the make & install command is not working

configure: error: Buggy GNU/libc (version 2.5 - 2.7) present. VLC would crash; there is no viable work-around for this. Check with your distribution vendor on how to update the glibc run-time. Alternatively, build with --disable-nls --disable-mozilla and be sure to not use LibVLC from other applications/wrappers.

View 3 Replies View Related

Fedora :: F13 Akonadi Crash (InnoDB: Unable To Lock ./ibdata1, Error: 11)?

Nov 18, 2010

I have been working with F13 since last summer and Kontact/Akonadi worked fine all this time. Two weeks ago, more or less, Akonadi started to crash every time I tried to start it. Therefore I can use Kmail but without geting access to my contacts, since I put them on a resource controlled by Akonadi.

Just now I have updated a lot of KDE modules, include Akonadi, but the result is the same. Hereafter you will find the entire akonadi-selftest-report:[URL]..

View 2 Replies View Related

Ubuntu :: Unison Not Working - Uncaught Exception Gtk.Error("GtkMain.init: Initialization Failed Ml_gtk_init: Initialization Failed")

Jul 30, 2010

So I installed the Unison synch software with sudo apt-get install unison-gtk. When I set up the two directories for synchronization it looks like this: $ unison ssh:\SERVER\pathpath /var/www/path/path/path

I am getting this error in terminal Uncaught exception Gtk.Error("GtkMain.init: initialization failed ml_gtk_init: initialization failed") Fatal error: exception Util.Fatal("Error in getLogch: /home/path/.unison/unison.log: No such file or directory"

View 1 Replies View Related

OpenSUSE Hardware :: The Exact Error Message Is: "Failed To Extract ZIP Archive" Or "Failed To Load File"?

Apr 13, 2011

I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---

System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---

[code]....

OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".

View 7 Replies View Related

Ubuntu :: Installing Emacs 23.1 - Error "makeinfo Is Missing - Cannot Build Manuals Make: *** [info] Error 1 **** Installation Failed"

Feb 6, 2010

I've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:

Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1

View 4 Replies View Related

OpenSUSE Install :: Glib Error - GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: Assertion Failed

Mar 31, 2011

As root, type "zypper update" and get several lines of the following error:

**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
Loading repository data...
Reading installed packages...

Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).

View 5 Replies View Related

General :: Embedded Reboot Crash - Error Executing The Reboot Command

May 4, 2011

I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved