While I was installing screenlets via
Code:
sudo apt-get install screenlets
My pc restarted due to electricity cut off! and now when I try to re-install I get that error in terminal
Code:
dpkg: error processing python-numpy (--configure):
dependency problems - leaving unconfigured
[Code]....
I've downloaded both Kubuntu and Ubuntu and tried to install them. Both methods (wubi and cd).However I encounter the same problem, I think it's a graphic crash because I see some patern of pixels right after it loaded.I've made a pic (here) using my phone.However this problem doesn't occure in Ubuntu 8.04 (8.04 because I ordered some CD at that time).An option would be to install 8.04 then upgrade till the latest, but I'm worried about encoutering the problem right after that.Some specs:AMD Athlon II X4 3.0 GHz2 GB RAM DDR2NVidia 240GT160 GB HDD
View 2 Replies View Relatedi was about to install fedora i had checked first and then when i reenter the disk to install it on hdd it shows me gnome bug error and some kind of crash but the desktop was ready with 2 bug it says gnome crash and other i didnt remember ..so what you say , should i install using that cd or i have to recreate a cd with fedora 14.i m using win7 already i wanna dualboot
View 6 Replies View RelatedI was multitab browsing (around 15 tabs) in latest firefox for karmic koala (9.10) and at the same time downloading (probably already auto-installing) in synaptic-package-manager the package: textlive-fonts-extra (and other necessary packages; this was around 90 mb download and 250 mb installation)suddenly the pointer doesn't move anymore, (Alt+tab , and other combinations also didn't work anymore)
and I hold the power button untill the computer is turned off,when I reboot I get this message"invalid system disk, replace it and press any key to continue"now I'm using a livedisc to boot the computer (jaunty 9.04)To rebuild the system i think to manually install the packages that probably were interupted while installing and made it not work anymoreThe packages to be installed when text-live-fonts is marked for install (in synaptic opened from the livedisc) are:
dvipdfmx
lmodern
text-common
texlive-base
texlive-base-bin
[code]...
This may be different with 9.10 configuration (can anybody look to see which are necessary with 9.10) I think the computer wasn't responding anymore because I used too many tabs at ones. I had this same problem a few times before in the past weeks but then I wasn't installing something and the computer did restart and firefox restored all the tabs. I cannot enter /home/ from the livedisc (no permission) and it's necessary , I am in the middle of exams and i need to print the paper that is on the disc by monday Is there a way to enter it via command console?
I was intending to do a clean install of 10.04.I have downloaded and burned desktop-i386.iso.After booting from CD and selecting install from the menu, I get the splash screen for a few minutes, then black screen, then purple ubuntu screen, then the error message "the installer has encountered an unrecoverable error. A desktop session will now be run etc.....".
I am thinking this may be related to ACPI, because when i 'Try Ubuntu without installing' it loads ok but I get a 'Crash Report' notification on the panel.
If again 'Try Ubuntu without installing' with F6 option "ACPI=Off" it loads up with no problem.
Another thing I noticed is that when I load with ACPI=OFF, my external drives automount, but if i dont turn ACPI off, and get the Crash report notification the external drives do not automount.
I have been trying to use the amd64 version of the natty mini iso installer. The installer crashes with the log stating bad address us.archive.ubuntu.com. This is true for any archive I select. error is: mirror does not support the specified release (natty) Anyone know of a working mirror or if one will ever work? Not a confidence builder in the development.
I also tried the Maveric version of the mini iso. It also crashes with complaints about a bad kernel. So far a wasted day. Just add to this I tried the normal natty iso. The problem is in the manual partitioning. It locks up solid while trying to set partitions. Is there a later release of the iso?
Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot
but it doesn't do it properly.
I just downloaded and installed the latest version of Ubuntu on my laptop. After installing the drivers for the visual effects I restarted the computer, and now after the all black screen with the little white Ubuntu symbol in the middle the screen goes blank, lots of horizontal lines appear and it contrasts out to a completely blank, white, useless screen. Any suggestions? EDIT: laptop is a Toshiba 5105, bumped up to 1.2gb of RAM
View 5 Replies View RelatedI've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
Quote:
kai@kai-laptop:~/acerhk-0.5.35$ make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/kai/acerhk-0.5.35 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'[code]....
I don't get it. Tried so many ways...
I download wubi from [url] and when i install there is error. looks like this.
View 1 Replies View RelatedI tried to install ubuntu from usb and i got this error "errno 5 input/output error" any help would be appreciated thanks in advance
View 7 Replies View RelatedThe installation was in progress before I got this error:'Ubuntu-Minimal' Missing"Report this bug against update manager package and include the files in var/log/dist_upgrade/ into bug report."
View 1 Replies View RelatedI'm experiencing difficulties installing Ubuntu 11.04 on an HP Laptop originally running Windows7. I tried using CD, but it blocks somewhere and displays Kernel Panic, etc.I then tried using the USB Key boot and created the Boot Disk with Ubuntu. But I have the following error when booting from the USB Key: Unknown keyword in configuration file. boot:I downloaded the 32-bit version of Ubuntu, but the original system is a 64-bit one.
View 3 Replies View RelatedI downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
OK, I've tried to install:Mint 6, 7 XFCE, and 8jolicloudeasypeasyand probably another or two..Oh, I'm installing this on my Acer Aspire One 751h, so I am using a USB key and UltraISO, with the exception of jolicloud, which has its own USB creator, and most recently I tried Mint 6 using UNetBootIn.Anyway, I keep getting the same general error, but with different files... Sometimes its errno5: input/output error, and other times its parts of a file (blah/doowop/dadada/video....) I don't know if its a driver problem or what, but I've seen video, sound, and other random stuff.. each time it gives a different one though.Either way, the main paragraph in the window talks about having a dirty CD, needing to replace my hard drive, or burning a new CD at a slower speed... I've checked the md5sum, and that's not the problem.
I'm wondering if my problem is that I'm creating the USB from one computer, and then trying to install it on the 751h. Another thing that might be causing the problem, but I doubt, is the fact that when I set up the partition, I select "use entire disk". Another question, Does it make a difference if the drive letter changes? On our main computer, the USB is mapped to drive E:, but on the 751h, it shows up as D:. If I have to change it on the 751h, how can I without an OS? when trying to install linux, it wiped out my windows, and I don't feel like re-installing it just to change it in a few minutes.
I get my fresh copy of Ubuntu 10.4 from Ubuntu shipit (thanks to ubuntu). But i can't intall it. it shows error while installing. i tried both with in windows and from boot,
It shows some error with installer Installer has encountered a problem.
Then it runs live.i also tried it with downloaded alternate or other eddiiions of ubuntu, also tried ubuntu 9.
I'm following the instructions in the Medibuntu wiki. When I run the command in the terminal to add it to the repository, it runs for a couple of minutes then gives this error: Code:W: GPG error: URL...The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BE1B248616AE4E77.What does that mean, and how can I fix it?
View 3 Replies View RelatedAfter installing ubuntu 10.4 I tried to update but it caused some error as reported as follows. I have already tried to googling the solutions but it seems that there's no right one for me.
View 2 Replies View RelatedI'm trying to install server 10.10. I shose my language, than i give the command to install the server. At that moment my screens gets black. A couple of minutes later i get te following screen..
View 7 Replies View RelatedI have just bought a new HDD and installed it in my Ubuntu server. The problem is that when I try to boot, I only receive the message "Grub error 17" and at that point the computer freezes.
In my troubleshooting I found that without the new drive, the computer starts and the hard drives are listed in BIOS as follows:
1. DVD-rom (ide) - Master
2. 80gb disk (with OS installed) (ide) - Master
3. 1tb disk (sata) - Master
In the new setup the disks are listed like this:
1. DVD-rom (ide) - Master
2. 80gb disk (with OS installed) (ide) - Slave
3. 1tb disk (sata) - Master
4. 2tb disk (sata) - Master
May this different listing in BIOS lead to the Grub error?
Since the upgrade to server 11.04 from 10.10 I cannot install PHPMyadmin
I keep getting error package PHPMYADMIN has no installation candidate.
When I iried to install bugzilla on my Ubuntu Lucid, I kept getting the following message. I have used "sudo apt-get --configure -a " and this is as far as I can get with the installation. Is there a way of first stopping the process and then removing Bugzilla, as it has locked the admin for apt.
Setting up bugzilla3 (3.2.5.1-2) ...
dbconfig-common: writing config to /etc/dbconfig-common/bugzilla3.conf
granting access to database bugzilla3 for bugzilla3@localhost: already exists.
creating database bugzilla3: already exists.
dbconfig-common: flushing administrative password
[Code].....
error: No output seen in over 300 sec... (Is the CD-ROM/DVD source repository enabled? It shouldn't be!) error: Package install command failed with error code 255 Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ?
I've tried this [URL] but it didn't work for me. My sources.list already had the #. By the way I'm a new user to ubuntu and I'm having a pretty good time. Almost starting to feel at home in this OS. edit: I'm sorry. I realized I posted in the wrong section.
I have windows 7 installed on my copmuter and I ran the alternate disc cause the live disc didn't work for me. So installing was smmoth and I did everything right excpet for the grub part. It asked to be a master loader or something and I said yes. After restarting I see the grub menu but I only see two ubuntus(recovery mode) on the list and 2 test thingys ( memory test) So I go to the ubuntu tab and I get kubuntu ( as ecpected). Right now I am using kubuntu and it is fine but?
View 9 Replies View RelatedAn unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at http://launchpad.net/aptdaemon/+filebug and retry.
I recently tried to install Oracle xpress edition 10g by downloading the ".deb" file of around 200 mb. When the installation was about to complete, the "Ubuntu Software Center" gave an error like shown in the picture.
I've just bought a new laptop (Acer 3810T - which has a "Core 2 Solo Processor) - so I have installed Linux for the first time in my life.... Ubuntu 9.10-desktop-amd64.iso - so far so good, I'm very very impressed and the operating system seems to be working fine. I assume that I have chosen correctly the AMD64 version then.
Fastforward to Skype installation, and I download the version (skype-ubuntu-intrepid_2.1.0.81-1_amd64.deb) - which is the best match as far as I can tell from Skype's website. However when I come to install it, I get the follwoing error: Error: Dependency is not satisfiable: lib32stdc++6 (>= 4.1.1-21)
Iḿ trying to install TCL 8.0.5 onto my machine, if i type �wish it tells me there are already these programs:
Code:
The program 'wish' can be found in the following packages:
* tk
* tk8.4
* tk8.5
* tk8.3
Try: sudo apt-get install <selected package>
The error trace is here:
Code:
luke@luke-laptop:~/Downloads/tcl8.0.5/unix$ ./configure
loading cache ./config.cache
checking for ranlib... ranlib
checking whether cross-compiling... no
checking for getcwd... yes
checking for opendir... yes
code....
checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string
Really not sure whats wrong, I�m horrible with linux if I�m honest, tried a couple of google searches but didn�t make very much progress.
I downloaded and installed the Ubuntu desktop edition and when I boot up I have the options to boot either Windows 7, or Ubuntu (so far so good), however, when I select Ubuntu I get a message saying that the following file is corrupt:
File: ubuntuwinbootwubildr.mbr
status: 0xc000000f
Info: The selected entry could not be loaded because the application is missing or corrupt.
Any thoughts on this? Would just re-installing it fix the problem?
janu@janu:~/Downloads$ sudo dpkg -i reconstructor-engine_3.2.3_all.deb [sudo] password for janu: Selecting previously deselected package reconstructor-engine. (Reading database ... 127917 files and directories currently installed.) Unpacking reconstructor-engine (from reconstructor-engine_3.2.3_all.deb) ... dpkg: dependency problems prevent configuration of reconstructor-engine: reconstructor-engine depends on kpartx; however: Package kpartx is not installed.
reconstructor-engine depends on mbr; however: Package mbr is not installed. dpkg: error processing reconstructor-engine (--install): dependency problems - leaving unconfigured Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_IN.cache... Processing triggers for python-support ... Errors were encountered while processing: what is that error
