I am a Ubuntu 10.4 Linux User (32 bits)! I installed the CodeWarrior Development Studio v10. The installation was OK. However, I am getting an error when I run cwide (see below). The problem seems to be in the library libpemicro_jloaderh.so.
A fatal error has been detected by the Java Runtime Environment: SIGSEGV (0xb) at pc=0xb17fb230, pid=2450, tid=2999868272 JRE version: 6.0_20-b02 Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing linux-x86 ) Problematic frame: C libpemicro_jloaderh.so+0x137230]
An error report file with more information is saved as: /home/alex/hs_err_pid2450.log If you would like to submit a bug report, visit: [URL]... The crash happened outside the Java Virtual Machine in native code. See problematic frame for where to report the bug.
I was running update manager in ubuntu and my system froze completely. I had no other option but to manually switch of the PC. Then after restarting the PC I got some error lines but I can't remember what they said. It didn't matter which linux version I chose from GRUB, nothing worked. Today when starting up shortly after the Ubuntu 10.10 screen with the blinking dots below it I see a dos type screen with only a flashing cursor and nothing happens.
Is there any way I can fix this? Or repair the ubuntu installation without loosing all my data/settings etc? I'm running now from the live CD. I can access the disk drive that has ubuntu installed on it. I have XP running on a separate disk and I can boot into XP from my motherboard's bios boot menu.
Today, everything was working fine until I started an upgrade. After the upgrade finished, my bluetooth keyboard stopped working, so i connected another keyboard and CTRL ALT Backspaced. The screen turned off, then turned on, but blank. The login screen didn't show, and i couldn't even switch to TTYl. The only way i got anything to work was renaming /etc/gdm and rebooting. then i had to switch to TTY while plymouth was running. Then i logged as root and ran startx, and it froze, once again. If i try to boot into recovery, it doesn't work either.
I have jessie and i have installed kdenlive 0.9.10-2, and it crashes at startup. I try to get a debug trace:
(gdb) run Starting program: /usr/bin/kdenlive [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault. __strcmp_sse2_unaligned () at ../sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S:29 29../sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S: No existe el fichero o el directorio. (gdb) bt [CODE]
I've recently installed the Fedora Core 14 on my laptop. Unfortunately, when I try to launch Fluent preprocessor Gambit 2.4.6 it immediately crashes giving the following message: Received exception: Assertion failed in /usr/local/fluent/build/gambit/dev/gambit_lnamd64/include/BPPTREE_CC.hpp, line 288: status == 0 I'm absolutely clueless of what might be the cause of this problem (all dependencies are resolved, at least all i know of, and all the updates applied, however the problem occurred both pre- and post-update). As i have already mentioned, there were no particular (aside from the libXm.so.3 ones...) difficulties in using it on former Fedora releases.
I am having plasma crashes for the past few days. I'm running KDE 4.5.2 and it was all running fine. Then the latest runs of updates happened and now I can't get a desktop. KDE runs but plasma fails to start leaving me with a black screen and a mouse pointer. This happens in both failsafe and normal, with or without a fresh .kde4 folder and consistently! Here's what the KDE bug window tells me.
I am running openSUSE 11.2 KDE desktop. (Also use LXDE as an alternative desktop because I am running on a P3 with 512 of RAM.) I originally had followed the guidance at Multi-media and Restricted Format Installation Guide - openSUSE Forums and had Amarok and Xine both working satisfactorily for several weeks. Now, for some reason, both apps begin to load and then crash.
I was running the Update Manager when my system froze due to the failure of Karmic to support motherboards using the Intel 845 chipset.
Although the update did not complete when I rebooted and invoked Update Manager it reported that the system was up to date. How do I reset the system so that I can install the updates?
I'd rather not switch back to SM 1.1.18 as 2.0 is so much better. I've had this same crash on at least one other page too (not on centos.org this time).
I am running matlab 2010b on centOS5.6. Matlab opened without any error either in the computer terminal or in VNCSERVER. While running bench (of matlab) the session or the vncserver are crashing.In some cases the bench run for the first time without any problems, however it will crash the session or the vncserver on the 2-3 runs of the same code.
I am running matlab 2010b on centOS5.6. Matlab opened without any error either in the computer terminal or in VNCSERVER. While running bench (of matlab) the session or the vncserver are crashing. In some cases the bench run for the first time without any problems, however it will crash the session or the vncserver on the 2-3 runs of the same code. Any idea how to solve this issue?
I just updated my ubuntu to 11.4 and restart but it stop on "Checking battery state. [OK]" line while start up. However it starts in recovery mode -> low graphical configuration mode. Is there any solution for this?
I've installed ssh, as well as a script of my own, in /etc/init.d, and I've added both of them to the startup sequence (I've tried both the "rcconf" graphical utility, and "update-rc.d"). The installation utilities seem to be working just fine and report success, and everything seems to be where it should be, but on reboot, my startup scripts don't start up.
I have these scripts running on MANY machines withOUT the GDM/Gnome Desktop running. On this ONE machine, though, I have Gnome running.
Is there some fundamental difference between the GUI Desktop's startup sequence and the text-mode-only startup sequence?
I have just installed a fresh Ubuntu 10.04 x64 installation. I have a script that I am added manually that is not starting on startup like it should, but I also have 2 normal startup scripts that are not running either. Apache2 and mt-daapd are 2 applications that I installed with sudo apt-get install apache2 mt-daapd. Neither application is starting during bootup. I tried making sure there were in the rc.d by using update-rc.d but both said that they already existed. Another script (mount_data) I made myself also has been added and is executable like it should be that isn't running at bootup.
I noticed my computer seemed to be running excessively noisily, and upon checking into System Monitor, I noticed that my CPU was being held constantly at 100%. None of the processes listed on the process tab seemed t be responsible, but I found this thread which gave me the 'top' command.
Running it, I found a process running as root called 'bmcapture' that was responsible for the CPU use. Trying to 'kill' it failed; using 'sudo kill' gave me no error messages, but the process continued to run. This carried on through a restart.
I then proceeded to shut the computer down and leave it off for a minute. When I booted up again, the CPU was still running at full, and using 'top' I determined the same process was responsible; however, 'sudo kill' successfully killed it this time, with apparently no adverse effects.
My question is if anyone has any information about what 'bmcapture' is, whether its harmful (aside from the obvious issue of it using full CPU) or malicious, and if there's any way to stop it running on startup, because as it is I'm having to manually 'sudo kill' it every time I turn my computer on to stop it eating my CPU alive.
I run Ubuntu 10.04. For some reason, MySQL won't start on startup. How do I make it run on startup? I installed it by installing LAMP using tasksel and did everything according to: [URL]. Also, I have another problem: When I try to start/stop/restart mysql in the terminal, the terminal will not give me any prompts after entering the command. E.g., after entering "sudo service mysql start", nothing will happen. Even after waiting for 30min, nothing happens.
I want to launch qiv upon startup to show a series of photos in slideshow fashion (this will be the sole purpose of this particular laptop). I tried adding the command via System->Preferences->Startup Applications but this does not produce the desired result. In fact, the slide show doesn't even start.
I installed Gnunet (a secure P2P program) on Ubuntu 10.10 using Ubuntu software centre but had difficulties getting it to work so removed it. However, the gnunetd process loads at startup. It is only visible when typing 'top' in the console and not in the system monitor list of processes.gnunetd --version tells me that it is 0.8.1b sudo apt-get remove gnunetd tells me 'unable to locate package' why the process loads and how to remove it? I can kill it in the console but would like a way of getting rid of it permanently.
I am trying to run a script that runs at startup. I have followed directions found at this Website: [URL]. Everything works except the script which consists of two lines.
#!/bin/bash sleep 30 && conky ; I changed the file permissions to be executed and named it .conky-startup.sh.
Then I went to System>Preferences>Startup Applications and created a new entry that points to my script file. When I restarted my system, Conky didn't start. If I try to run the file from Nautilus or the Terminal, nothing happens.
Im not sure why they aren't working - but my startup applications are not running at boot. They run fine from terminal.
I have a startup application for Xchat and the command is just xchat (which works fine from terminal) but it isn't loading at? - I have checked and im not running in safe mode or anything like that - just the standard ubuntu desktop).
Unrelated Question:
Is there a 'global' i.p address I can use to represent all devices on my LAN - so I can mass whitelist in firestarter?
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
I am trying to run my script at startup but it doesn't run the script as root. Do I need to add my root username and password in the script, or somewhere else?
Sometimes I need remotely connect to my computer, but my router gains IP address dynamically. So I wrote simple script which gains my router IP and send me email:
Code: #!/bin/bash function send_mail { echo $1 | mutt -s "New IP" myemail.com } old_ip= while true; do new_ip=`wget www.whatismyip.com/automation/n09230945.asp -O - -q` if [ -n "$new_ip" ] && [ "$new_ip" != "$old_ip" ]; then old_ip=$new_ip send_mail "IP changed, sending new IP: $new_ip" fi sleep 5m done
I need it to run at system startup. When I'm adding it to .bash_profile bash path/resolveIP & I'm not getting any mail. In case of bash path/resolveIP (without &) I'm getting mail, but I guess it will never get to the next command in .bash_profile. So I put my script in /etc/init.d directory, but I don't know is it okay to have endless script there????
Sometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
I'm trying to get synergy+ to work on Fedora 12 on start up. I'd like to be able to log into Fedora using my keyboard and mouse through synergy+. I've tried adding the line Code:synergyc <localipaddress> at the end of the /etc/rc.local file but I still can't use my keyboard and mouse to log in. I've also tried adding the lineCode:su <username> -c "synergyc <localipaddress>" to /etc/rc.local but it still doesn't work. Just to clarify, I do have synergy+ working on Fedora but I need to start it after logging in on each reboot by switching my keyboard over to the other computer.
I have a program I have made, and I would like it to run as soon as the system is finished booting. I am using Ubuntu Mini Remix to recreate a LiveCD/USB stick. After booting, it drops me to a command line where I can enter "sudo qct" and it will run my program (which is called qct, and it has to be run as root).I want this to be automated.Instead of going to a command line, I want it to run the program itself at that point. How would I go about doing this? I have read many tutorials about scripting but I cannot seem to get it to work.
I have not been able to find any information on this, mostly because I am sure I am searching for the wrong terms. Let me explain what it is I need to do.I have a timeclock process that needs to be running all the time on my Red Hat server. Right now, I manually start the process from terminal:Code:# ./timeclockThis runs the process inside the terminal. The only problem is that if I close the terminal by accident, the timeclock stops working. This is all well and good for now, until I get more timeclocks.Then I will need to have one terminal open per. What I would like to do is to make this process run at start up, and run behind the scenes (no terminal). At the same time, I need to be able to re-run the process (again, hopefully behind the scenes) in case the timeclock goes offline or the process crashes.I know very basic things about Linux administration, and I know it is possible to do this (as there are processes now setup by someone else that do this), I just do not know how. EDIT: An idea I had would be to make the script run every minute, checking to see if the process is already running, and if it is not, then to start it. That way it would automatically correct itself if it went offline.
