Software :: Vim 7.0 Is Opening Slowly
May 9, 2010
I'm running Vim 7.0 on Debian Etch. The system is between 2-3 years old. Over the past week or so, when I open vim, the document opens very slowly -- on the order of 6-7 seconds... I ran 'time vim', then exited the document as quickly as I could (I figure it probably took less than a second to type ':x<enter>')How do I figure out what changed to cause this problem? It's not outside the realm of possibility that I installed something on the system that caused this, although I never noticed a correspondence between installation and the slowdown in vim. I'm not even exactly sure what I've installed over the last week.
View 2 Replies
ADVERTISEMENT
Nov 20, 2010
i am using Fedora 14. Once system get hanged during opening a video file so I had to restart the system by pressing restart button. But after restarting there are few problems appearing like system monitor not opening and Thunder bird opening but not showing any folder including inbox.
---------- Post added at 04:54 AM GMT ---------- Previous post was at 04:42 AM GMT ----------
Looks like SElinux has stopped working
View 3 Replies
View Related
Feb 7, 2011
One of the apps I would like to try out is usenext.Selectint the download for the right version (Linux - Suse, Red Hat, Fedora) I get the rpm file.Either opening this straight away or saving then opening it comes back with the following errors:
usenext-5.27-1.i386 requires mono(gdk-sharp) = 2.10.0.0
usenext-5.27-1.i386 requires unrar
usenext-5.27-1.i386 requires mono(glib-sharp) = 2.10.0.0
[code]....
View 8 Replies
View Related
Feb 21, 2011
After a period of time, the gnome nautilus responds very slowly and occupy high CPU and memory resource. when I open a folder, I have to wait for several seconds to see its response But there is no such problem under KDE environment.
View 5 Replies
View Related
Jan 9, 2011
Windows redraw very slowly when you move them, i.e. you move window and it redraws when you passed about half of the screen. Everything except that works fine as usual. Maybe anyone has any ideas what could happen?I have OpenSuse 11.3 with KDE 4.4.4, Radeon HD 4870 (proprietary drivers, but i've installed it long ago and it's likely not the problem).
View 7 Replies
View Related
Oct 12, 2010
I'm changing X's orientation with following command
xrandr -o left
xrandr -o normal
When orientation is changing screen becomes black for a moment then it switches orientation.So how to get rid of this black screen effect ? Maybe some other options should be added to xrandr ?
View 4 Replies
View Related
May 17, 2010
In Karmic, Places has stopped working. It just thinks for a minute, then stops without opening the requested location or giving any error message. Also, Open Office Presentation, which failed during a lecture, forcing me to boot Vista and show images one by one. But my first problem was that I can't get my Airplus modem to work under Ubuntu at all. Others have had the same problem, with various awkward workarounds that I can't get to work. I wanted to remove Karmic and load Jaunty, in the hopes that I can get my Airplus to work. I am in Russia spending the summer on the dacha near St. Petersburg (no phone, so I use a cell-based service called Skylink for internet contact. I am a newbie to Ubuntu, Linux in general, am not a technical user at all, that is, do not know any programming languages.
I need Places to move data from various folders under Karmic to an external drive so I can get rid of Karmic without losing the data. Can I use commands in the terminal to move data?I really, really don't want to go back to Windows. Can anyone help me get my files off to a safe place so I can try a different version of Ubuntu?
View 1 Replies
View Related
Feb 25, 2011
Firefox is running really slowly for me. It seems it's accessing the hard drive constantly (as seen through System Monitor).I'm running 10.04If I start Thunderbird and Firefox invariably the disk drive light just keeps flashing for minutes and the Firefox screen gets "grayed out" and everything just slows way down. Often I just throw the power switch to shut the computer off.
View 2 Replies
View Related
Mar 2, 2011
I just installed a OCZ Vertex2 and was a bit disappointed by the boot time (Kubuntu 10.10 64bit).
Honestly speaking, booting itself is fast at least until disk access is concerned but it seems that the system faces some delays which I cannot explain.
Here is a excerpt from my dmesg:
Code:
[ 2.903360] md: raid6 personality registered for level 6
[ 2.903362] md: raid5 personality registered for level 5
[ 2.903364] md: raid4 personality registered for level 4
[Code]....
View 1 Replies
View Related
Jan 6, 2009
I run hardy heron on my laptop. I wished to remove the graphical login so I removed gdm.Now I can boot without graphics, and run startx when I wish to start x. I like this behavior. However it takes a very long time, I believe longer than using graphical login, to start gnome. It takes 45 seconds between running startx and getting a fully logged-in desktop.1. how can I figure out what is taking so long and fix it2. what if I want to boot KDE instead, which I have installed but almost never use(I don't know how to make startx boot kde instead)
View 5 Replies
View Related
Feb 23, 2010
I have a fedora 12 server on which the time is advancing very slowly, 1 sec every 20 sec.Does anyone have an idea what is wrong
View 14 Replies
View Related
Mar 16, 2010
I'm using KDE Version 4.4.00 on OS11.2 all my browsers (konqueror, firefox, chrome) webpages loads painfully slowly on vista same connection, same machine is loading is faster. I did not notice this in OS11.1 on same machine.I tried disable IPv6 in boot and in firefox but it did not improve situation significantly. I still get long looking up of dns time after time.Am I "paranoid" or is there some way I can address this this slow loading issue?
View 9 Replies
View Related
Jan 27, 2010
I have a 320 g.b hard drive for a Ubuntu and a 500 g.b Windows XP. I haven't used XP in a while because well..its windows. Anyway, I wanted to go back to the windows XP side because I needed to do some editing on sony vegas. I restarted the computer and tried starting windows and everything in the system32 folder is totally gone!I don't know what to do because I don't want to have to do a fresh install and I don't have enough space to bring everything over to the ubuntu side.
I can't find 90% of my music when I search for it in the folders. (On the ubuntu linux side). When I go into rythmbox, my music is slowly being deleted (Like my Joe satriani, Crystal planet). What is funny is that rythmbox can see a lot of my music (not all) but not the folder program. Its really weird, when I take the pure locations of the music (that rythmbox can see), and copy them, then go into folders and paste them into the search at the top, they come up. But, when I click on the up button (in folders) they don't show the folder I was just in.If some one can help me with:
1. Knowing to fix windows XP without having to reinstall anything.
2. Knowing how to save my folders from being randomly deleted.
View 4 Replies
View Related
Feb 25, 2010
I just installed Ubuntu 9.10 and I was messing around with some settings and all that. I went to System > Preferences > Appearance > Visual Effects. I then proceeded to enable the "Extra" option. I was prompted to restart my computer for the effects to take place. Now it is running somewhat slow, for example when I open up Firefox, or any other program, it loads very slowly. I went back to change the Visual Effects back to "None" but it was already on that option, I don't know why. I went to my Hardware Drivers and I didn't have the recommended graphics driver on, so I put the recommended on and that had no help.
View 3 Replies
View Related
Mar 7, 2010
There are quite a few threads in this forum on how to convert a DJVU file into a PDF (among which this thread the instruction of which I followed.) I converted a DJVU file by printing it to a PS file from the Document Viewer. Then I printed again the PS to file into a PDF from that same application. The second phase took more than 24 hours and resulted in a scanned PDF of less than 500 pages with a size of 315 MB! I have many books of more pages which come down to 1 MB only. What happened in the process to make it so damn slow and so inefficient? Is there a good alternative (not ps2pdf because it provides the same result)?
View 1 Replies
View Related
Mar 26, 2010
I have a "DataTraveller" 16 GB - that gives me slower and slower speeds on copying files to it. It starts with 8-9 Mb/sec, and goes down all the time, until it's down to kb/sec.
View 9 Replies
View Related
Jun 7, 2010
I've been using Hardy Heron and linux mint 7 for quite a while now and was very happy with both until the last month or so.For some reason the computer seems to run much more slowly than it did. I deleted the linux mint because I was only testing it, but Hardy has been my stable (trusted) distro for quite some time.I've actually booted into xp to write this because Hardy had got too slow.I've spent the day downloading Ubuntu 10.04 and Linux mint 9, but both failed to install when I tried.
View 3 Replies
View Related
Jul 1, 2010
I hope this is the right forum for this.
I downloaded Blender today to try my hand at making some 3D graphics. I have used it in the past on a windows machine and it ran smoothly. This time I have downloaded it onto a computer with similar specs but it runs very slowly. The program is laggy and slow to respond to both keyboard and mouse input. When I checked the system monitor it said that I am using 50% of my cpu and 1/6th of my memory running both Blender and Firefox(to write this post). The machine is running no hotter than usual and the fans do not seem to be being stressed at all.
Does anyone know what could be causing the program to run so slowly?
View 2 Replies
View Related
Jul 29, 2011
I'm running a Minecraft server off of a dell T110 with Ubuntu 10.1 installed, as I haven't had a chance to install Natty yet. The problem is, it's running very very slowly, past the point where I could say it's the hardware's issue.
I have an intel xeon (2.4ghz quad core) in there, with 2gb of RAM. 2gb isn't much, but the computer runs slowly even when the MC server itself is off.
I'm talking super super slow, like, the cursor doesn't even show up all the time. It disappears frequently and things take a while to render/open, a site like facebook takes about 20 seconds to completely load.
This is my first ubuntu install, so I'm kind of new to it. The only problem/solution I could think is that I may have installed the 32bit version on a 64bit processor. I don't think I did, butttt that's the only thing that occurs to me
View 3 Replies
View Related
Jun 23, 2010
I have Western Digital 1 TB external HDD. I had slackware 13 and it could copy data to it with speed around 30 MB/s (copy from machine to HDD) and it was cool. It's usb 2.0 as KInfoCenter says. But now in fedora 13, it's like 1 MB/s or even less (KInfoCenter still says usb 2.0). Any special mount option to set in fuseblk to speed it up? I mean something like blksize or like that?
Code:
/dev/sdc1 on /media/My Book type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
View 4 Replies
View Related
Aug 13, 2010
when i used firefox there was a up and down arrow at the side of a web page so i could scroll slowly up or down,i am now using peppermint ice and the default browser is chromium which i like but there is no up or down arrow,does anyone know if there is an extension to put the arrows there?
View 2 Replies
View Related
Mar 29, 2011
the web page will eventually open up or if i hit refresh 2.6.35.11-83.fc14.i686 bind version 9.7.3 i have disabled ipv6. using ie for browser.
[code]....
View 5 Replies
View Related
Jun 25, 2010
i run into a very annoying thing, usually take less than a second to connect to the internet using pppoe-start but today after a new installation of slackware 13.1 take a couple of secs to connect.
now:
# pppoe-start
Connected!
usually:
# pppoe-start
. Connected!
i'm using kernel-generic-smp-2.6.33.4, i even rebuilt the rp-pppoe package but it's the same thing. same behaviour was also in the previous release using kernel 2.6.29.6 due the broken forcedeth in that version of kernel, but on ArchLinux using the same version of kernel works normally.
View 1 Replies
View Related
Oct 23, 2010
I am currently using slackware-current with fluxbox is my window manager. I aim to have a light weight environment. But xpdf renders pdf very slowly. Are there any one having this issue before. As alternative, i have to install wine and use Sumatra PDF.
View 12 Replies
View Related
Aug 5, 2009
We have a problem with udevd process. It keeps going increasing slowly up to 100% cpu and the only way we can sort it out is by stopping udev and starting it back up again or rebooting the server... :/ see below info on server, it is used to purely run PHP, mysql and other static content is being served from other servers:
[Code]....
View 1 Replies
View Related
Feb 15, 2011
I have CentOS 5.5, Dell 2407FPW LCD and nVidia GT310 video card. For some reasons, if I maximize my browser to full screen and scroll down (or up, direction doesn't matter), it slowly scrolls. At first, I thought that it had something to do with my firefox.
Then, later on, I found that if I play video files with VideoLan in full screen mode, it is like in slow motion mode, but I have no problem to play the same video in a smaller frame. Hence, I feel that it has something to do with either the video driver or the monitor driver. I am using the Dell 2407FPW(Digital) and GT310 drivers coming with CentOS 5.5. Here is my /etc/X11/xorg.conf:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]...
View 3 Replies
View Related
Feb 23, 2010
I have tried liveCD, but open suse is running so slowly. Will it be faster when I install it?
View 8 Replies
View Related
Jan 3, 2010
I have scrolling speed problem on my mouse, however it s working sometimes when i restart OS i mean it s working slowly as it should. But it s random dont know whats wrong with sometimes it s scrolling so fast and thats killing me u know it s really so hard to use it when browse something on web-pages. Weird part is how it s working ok when i restart OS.
View 1 Replies
View Related
Jan 17, 2010
I try to do anything in wine, including winecfg, I get a lot of errors, and the program runs really slowly. Here are the errors
Code:
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
fixme:win:RegisterDeviceNotificationA (hwnd=0x147f30, filter=0x84e9e4,flags=0x00000001),
returns a fake device notification handle!
fixme:advapi:RegisterTraceGuidsW (0x100778a, 0x100a060, {485e7de8-0a80-11d8-ad15-505054503030}, 1, 0x33fe28, code....
I get this error for every program, so I do not think it is an error with the program. If fixing this will change anything like making it faster any help would be appreciated. Oh, I also can only run a few programs. I can't run things like WMP or itunes, and I think this may be the cause.
View 2 Replies
View Related
Feb 11, 2010
Has anyone else noticed that Firefox started running incredibly slowly?It just happened on two of my computers (one 9.10, the other 8.04 LTS).After starting firefox, it just sits and sits while trying to load a page. Even a local page (my router's config page). It literally takes about 5 minutes to load URL...Other internet apps are working fine, including Opera, which is how I'm writing this.
View 5 Replies
View Related
