OpenSUSE Network :: Web Pages Loads Very Slowly
Mar 16, 2010
I'm using KDE Version 4.4.00 on OS11.2 all my browsers (konqueror, firefox, chrome) webpages loads painfully slowly on vista same connection, same machine is loading is faster. I did not notice this in OS11.1 on same machine.I tried disable IPv6 in boot and in firefox but it did not improve situation significantly. I still get long looking up of dns time after time.Am I "paranoid" or is there some way I can address this this slow loading issue?
View 9 Replies
ADVERTISEMENT
Mar 29, 2011
the web page will eventually open up or if i hit refresh 2.6.35.11-83.fc14.i686 bind version 9.7.3 i have disabled ipv6. using ie for browser.
[code]....
View 5 Replies
View Related
Feb 14, 2009
After the Suhosin-Patch, I can no longer load mythweb pages from my mythtv server. Checking the apache2 error.log yields the following.
PHP Code...
I noticed that this appears to be an old bug come back to life again, but the fix to it was never revealed.
View 3 Replies
View Related
Jan 26, 2010
I have a copy of 9.10 that was downloaded at the time of the official 9.10 release. I don't know if there has been improvements made in this area since then. But but anyone know why 9.10 accesses web pages realllll slowly for me. It seems to boot up normally and web pages load normally but connecting to the web page takes a long time, like 10-15 seconds.
View 4 Replies
View Related
Jul 1, 2010
THIS ISN'T A SCRIPTING ERROR! I'M USING PHPMYADMIN (or trying to)! People on #httpd are useless for help.
Well, ir jus installed Apache2 and PHP5 on my openSuSE 11.2 server, and I just get blank pages for PHP, but HTML works fine. Ima jus guess this is a common error.
View 3 Replies
View Related
Nov 22, 2009
I have openSUSE 11.2 64-bit KDE, I have installed it with lan cable connected, install updates and than switch to wireless.Everything worked great until I went to my girlfreind with laptop, there I can connect to router, use Skype but can't browse pages with firefox, can't install packages with YAST Also wired connection gives the same result but her PC have no problem with Internet.I have traied ifup, deleting /etc/resolv/conf, disabling NetworManager routing options with no succes
View 9 Replies
View Related
Mar 19, 2011
For some reason Firefox loads pages really slow on my 11.3 install. Chrome everything loads fast. I am running the latest of firefox.I have done the usual tweaks to the about:config that I found on the internet. Is there a reason for this and can I fix it?
View 8 Replies
View Related
May 22, 2011
I would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
View 9 Replies
View Related
Apr 11, 2010
One of the biggest issues i have at the moment is that my network based plasmoids on my KDE desktop load before my wireless network connection is established, so i'm thinking it would be best to start up the wireless connection at boot time. On previous distro's, I did this with netcfg but I can't seem to figure out how to do so in OpenSUSE 11.2. Is this the best way to manage this issue or is it possible to set a delay before the plasmoids load up?
View 5 Replies
View Related
Jan 9, 2011
Windows redraw very slowly when you move them, i.e. you move window and it redraws when you passed about half of the screen. Everything except that works fine as usual. Maybe anyone has any ideas what could happen?I have OpenSuse 11.3 with KDE 4.4.4, Radeon HD 4870 (proprietary drivers, but i've installed it long ago and it's likely not the problem).
View 7 Replies
View Related
Feb 23, 2010
I have tried liveCD, but open suse is running so slowly. Will it be faster when I install it?
View 8 Replies
View Related
Apr 20, 2011
In graphic interface, when I use dolphin to view the files in super user mode, this application runs very slowly, and react dull at each request!
View 7 Replies
View Related
Feb 19, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Sep 9, 2009
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies
View Related
Jul 20, 2011
I just installed 11.04 on my Samsung n130.
It does connect to the router, but when I open a page it does not load it...
It works ok with the ethernet cable.
Edit: after restoring from sleeping mode, it does not see any wireless network, I have to reboot.
View 4 Replies
View Related
Jun 27, 2010
I have problem with network on my laptop. Networks status is Active and Online but i cant open any pages. (was working until installation openSUSE on ext HDD)I already try both wireless/wired connection but nothing.
View 2 Replies
View Related
Sep 8, 2010
I'm currently setting up a vlan network and after reading several man pages I still have 2 questions / problems:
1. I would want to put several subnets into one vlan.Meaning for example, I want to have the following Vlans with subnets:
vlan1 10.1.1.0/24
vlan2 10.1.2.0/24
vlan3 10.1.3.0/24
vlan3 10.1.4.0/24
vlan3 10.1.5.0/24
Is that possible?
EDIT: I found a sample configuration, sadly without any comments, where there are defined some interfaces named vlan1:0 trough vlan1:3. Could that be the option I've been looking for.However in the definition of the vlan1 device it is configured with the subnetmask 255.0.0.0 . I would like to know the mechanics of that option, too.
2. In the wlan part of the network I want to have a dhcp server distributing ip addresses. However I want hosts the server 'knows' (by mac address) to be in a different vlan than those unknown. Is there any way to achieve that? If yes, do I need special wlan access points or can I do it by my configurable switch or by the server?
View 2 Replies
View Related
May 31, 2011
I recently bought my laptop (Fujitsu nh540) and installed FC14 on it. I have Integrated WLAN Atheros HB97 (IEEE 802.11b/g/n) (more info here about the config) running on: 2.6.35.13-91.fc14.i686.PAE
Since I installed FC I've had problems with the internet. In any browser pages load very slow, it looks like the browser waits some seconds, sometimes even 1-2 minutes until it actually starts to load the page.
Second thing I saw is that when it boots I keep getting:
Determining IP information for eth0... failed; no link present. Check cable? [FAILED]
But I have WiFi internet. I am not using a wired internet connection.
I installed madwifi driver (compiled it, after reading some info on google and it seems it should be good for my network) and it seems it's a bit better, but I still have to wait some seconds until it starts loading pages. I tried different browsers, it makes no difference. On my other 2 laptops I have no problems, the internet works fine, same goes for my android mobile phone. Another "nice" problem I noticed is that when compiz is enabled I see incoming video on skype black and the same black screen for some movies with some programs. After disablig compiz, all works for video.
View 1 Replies
View Related
Feb 26, 2010
opensuse v11.2, linux
The system messages log show thousands of these messages below. One every 5 seconds. Is this expected? Is there a fix?
Code:
Feb 26 12:12:18 sma-station14l pulseaudio[3214]: ratelimit.c: 15 events suppressed
Feb 26 12:12:23 sma-station14l pulseaudio[3214]: ratelimit.c: 16 events suppressed
Feb 26 12:12:28 sma-station14l pulseaudio[3214]: ratelimit.c: 15 events suppressed
Feb 26 12:12:33 sma-station14l pulseaudio[3214]: ratelimit.c: 16 events suppressed
Feb 26 12:12:38 sma-station14l pulseaudio[3214]: ratelimit.c: 15 events suppressed
View 3 Replies
View Related
Dec 8, 2009
this is the 3rd time in 2 days I have installed this OS and its starting to annoy me. I have a Intel Celeron 2.6Ghz with i845 graphic chipset. I have installed 11.2RC2 and after the installation finishes and I reboot, it automatically asks which resolution I want (VESA/VGA). I have to select VESA since the VGA resolutions are HORRIBLY HUGE. When the boot screen comes, it loads halfway and then comes to a crashing halt. I let it load for 2 hours yesterday and it did NOTHING. After turning the computer off and back on, it comes to a screen to load normally or into failsafe. If I choose normal mode it does the same, if I choose failsafe, it does the same. So basically I have an OS I can't reach. If I could, I would give an xorg.conf on here, but I can't even get anywhere to produce one! When I put the live CD in, it boots perfectly, but I have to install again, only to get a OS that wont boot yet AGAIN.
View 8 Replies
View Related
Jan 26, 2011
I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
My site is at [URL]
Here is the output of ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
View 4 Replies
View Related
Dec 23, 2009
Recently, I upgraded 11.1 to 11.2. Everything seemed to go fine. However, for some reason the system boots with the debug kernel - 2.6.31.5-0.1-debug. According to Yast every kernel under the sun seems to be loaded on the system. Grub, however, gives two choices - one for the regular and one for the failsafe system. They both boot to the debug kernel.
How do I get this thing to load into the regular, as opposed to the debug, kernel?
View 5 Replies
View Related
Mar 20, 2011
I'm installing OpenSuse 11.4 to a HP DL180 G6 server, with no luck. I go through the installation process when booting up from the DVD, and when it finish and restarts in loads Suse and then goes to a black screen and doesn't respond.
View 9 Replies
View Related
Mar 31, 2011
If I do try to start a PXE Installation, the PXE Bootsystem loads the kernel, and
I guess it trys to start to load the initrd, but then it froze, i need to reset the computer. On the TFTP Server (aftp) I see that it trys to resend the initrd files and runs into a time out.
Ive the problem on 2 maschines, both with the same Motherboard (ASUS M4N78).
And the PXEinstallation of OpenSuSE 11.3 works fine, without any problems.
View 1 Replies
View Related
Sep 4, 2010
My openSUSE's working unstable and very slowly! Wireless is starting very late.It appears 10min later after i loggen in,and wants me to enter wireless password.This windows is showing up so late,and I can't connect internet before it shows up.
View 4 Replies
View Related
Aug 3, 2010
I installed apache2 with 'zypper in apache2 apache2-doc' and there's no man pages,
tried
man apache2
man apache
man httpd
View 4 Replies
View Related
Nov 20, 2009
I'm looking for an easy solution (1 click install) to scan multiple pages to one pdf file on openSUSE 11.2 with gnome.Most tools only support 1 page tobe scanned to pdf.gscan2pdf looks like a solution but I can't get it running on 11.2.(missing dependencies e.g. perl-forks)
View 9 Replies
View Related
Feb 3, 2010
i use firefox for a long time, but today in opensuse he just stoped working without any reasonable reason! The only page he opens from now on is my default page... when i try to go to other ones appears this error message: "by the way the server is redirecting you, you will never reach your destination" or something like that. After this, says that this may be caused by blocked cookies... the problem is with my firefox, cause konqueror is working ok!
View 9 Replies
View Related
Jan 2, 2010
i recently got a logitech clearchat pro headset for christmas. i configured it as the primary soundcard and, after i select it as master channel in kmix, it works perfectly.the problem now is that whenever i want to listen to sound on webpages (ie. videos) through anything but the headset, well, i can't.it seems now that browsers don't recognize that the headset's been unplugged, so they still try to play through the empty usb port. system sounds and amarok recognize when the headset's not there - the system says, when the logitech's been unplugged, that it "no longer works, falling back to hda intel" - but the web browsers, mozilla firefox and google chrome, don't produce any sound.
i've tried changing "hda intel" back to the primary sound card, but then the system doesn't automatically switch to the logitech headset when it's plugged in because it's not of "higher priority".
View 2 Replies
View Related
Jun 14, 2010
i have an Brother HL-2040 and normaly all pages print fine. But i noticed that some pages from pdf file won't print.The driver says it failed.Can that be, that my driver has some problems? I tried others but they don't print anything.I have the current opensuse 11.2 version and the latest cups version.
View 1 Replies
View Related
