Ubuntu Installation :: SSD: Booting Slowly Anyway?
Mar 2, 2011
I just installed a OCZ Vertex2 and was a bit disappointed by the boot time (Kubuntu 10.10 64bit).
Honestly speaking, booting itself is fast at least until disk access is concerned but it seems that the system faces some delays which I cannot explain.
Here is a excerpt from my dmesg:
Code:
[ 2.903360] md: raid6 personality registered for level 6
[ 2.903362] md: raid5 personality registered for level 5
[ 2.903364] md: raid4 personality registered for level 4
[Code]....
View 1 Replies
ADVERTISEMENT
Oct 2, 2010
Just tested the new Maverick rc on this computer. Few issues that I had where.Screen was blank (turns out that the screen brightness is set to 0...), that was easily fixed with fn + f3. It seems that this only happened with the first few boots Wireless doesn't seem to work. Will investigate more in a little Works now with the broadcom propriety drivers Fan seemed to be off or rotating very slowly with the result that the computer started to heat up very fast and started to burn my lap and there started to be graphical issues on the screen. Luckily after turning the computer off and cooling it for a little while things returned to normal. I just wonder what might have happened if I hadn't turn off... (overheating was noticeable after about 3min and turned the computer off in about 5min).
It seems that ubuntu is not able to adjust the fan speed! Resulting in system overheating. So if I boot with hot computer, the fan speeds up at the boot and I'm able to use ubuntu. But if I have "fan always on" option off in bios and boot with cold computer that spells big trouble! Does anyone have an idea how to fix this?
After installing ATI propriety drivers. Wasn't able to startx until deleted xorg.conf from /etc/X11/. One thing that noticed was that after this fan speed is now changing correctly! After deleting xorg.conf lost the right mouse button.
View 4 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
May 17, 2010
In Karmic, Places has stopped working. It just thinks for a minute, then stops without opening the requested location or giving any error message. Also, Open Office Presentation, which failed during a lecture, forcing me to boot Vista and show images one by one. But my first problem was that I can't get my Airplus modem to work under Ubuntu at all. Others have had the same problem, with various awkward workarounds that I can't get to work. I wanted to remove Karmic and load Jaunty, in the hopes that I can get my Airplus to work. I am in Russia spending the summer on the dacha near St. Petersburg (no phone, so I use a cell-based service called Skylink for internet contact. I am a newbie to Ubuntu, Linux in general, am not a technical user at all, that is, do not know any programming languages.
I need Places to move data from various folders under Karmic to an external drive so I can get rid of Karmic without losing the data. Can I use commands in the terminal to move data?I really, really don't want to go back to Windows. Can anyone help me get my files off to a safe place so I can try a different version of Ubuntu?
View 1 Replies
View Related
Feb 25, 2011
Firefox is running really slowly for me. It seems it's accessing the hard drive constantly (as seen through System Monitor).I'm running 10.04If I start Thunderbird and Firefox invariably the disk drive light just keeps flashing for minutes and the Firefox screen gets "grayed out" and everything just slows way down. Often I just throw the power switch to shut the computer off.
View 2 Replies
View Related
Jan 6, 2009
I run hardy heron on my laptop. I wished to remove the graphical login so I removed gdm.Now I can boot without graphics, and run startx when I wish to start x. I like this behavior. However it takes a very long time, I believe longer than using graphical login, to start gnome. It takes 45 seconds between running startx and getting a fully logged-in desktop.1. how can I figure out what is taking so long and fix it2. what if I want to boot KDE instead, which I have installed but almost never use(I don't know how to make startx boot kde instead)
View 5 Replies
View Related
Jan 27, 2010
I have a 320 g.b hard drive for a Ubuntu and a 500 g.b Windows XP. I haven't used XP in a while because well..its windows. Anyway, I wanted to go back to the windows XP side because I needed to do some editing on sony vegas. I restarted the computer and tried starting windows and everything in the system32 folder is totally gone!I don't know what to do because I don't want to have to do a fresh install and I don't have enough space to bring everything over to the ubuntu side.
I can't find 90% of my music when I search for it in the folders. (On the ubuntu linux side). When I go into rythmbox, my music is slowly being deleted (Like my Joe satriani, Crystal planet). What is funny is that rythmbox can see a lot of my music (not all) but not the folder program. Its really weird, when I take the pure locations of the music (that rythmbox can see), and copy them, then go into folders and paste them into the search at the top, they come up. But, when I click on the up button (in folders) they don't show the folder I was just in.If some one can help me with:
1. Knowing to fix windows XP without having to reinstall anything.
2. Knowing how to save my folders from being randomly deleted.
View 4 Replies
View Related
Feb 25, 2010
I just installed Ubuntu 9.10 and I was messing around with some settings and all that. I went to System > Preferences > Appearance > Visual Effects. I then proceeded to enable the "Extra" option. I was prompted to restart my computer for the effects to take place. Now it is running somewhat slow, for example when I open up Firefox, or any other program, it loads very slowly. I went back to change the Visual Effects back to "None" but it was already on that option, I don't know why. I went to my Hardware Drivers and I didn't have the recommended graphics driver on, so I put the recommended on and that had no help.
View 3 Replies
View Related
Mar 7, 2010
There are quite a few threads in this forum on how to convert a DJVU file into a PDF (among which this thread the instruction of which I followed.) I converted a DJVU file by printing it to a PS file from the Document Viewer. Then I printed again the PS to file into a PDF from that same application. The second phase took more than 24 hours and resulted in a scanned PDF of less than 500 pages with a size of 315 MB! I have many books of more pages which come down to 1 MB only. What happened in the process to make it so damn slow and so inefficient? Is there a good alternative (not ps2pdf because it provides the same result)?
View 1 Replies
View Related
Mar 26, 2010
I have a "DataTraveller" 16 GB - that gives me slower and slower speeds on copying files to it. It starts with 8-9 Mb/sec, and goes down all the time, until it's down to kb/sec.
View 9 Replies
View Related
Jun 7, 2010
I've been using Hardy Heron and linux mint 7 for quite a while now and was very happy with both until the last month or so.For some reason the computer seems to run much more slowly than it did. I deleted the linux mint because I was only testing it, but Hardy has been my stable (trusted) distro for quite some time.I've actually booted into xp to write this because Hardy had got too slow.I've spent the day downloading Ubuntu 10.04 and Linux mint 9, but both failed to install when I tried.
View 3 Replies
View Related
Jul 1, 2010
I hope this is the right forum for this.
I downloaded Blender today to try my hand at making some 3D graphics. I have used it in the past on a windows machine and it ran smoothly. This time I have downloaded it onto a computer with similar specs but it runs very slowly. The program is laggy and slow to respond to both keyboard and mouse input. When I checked the system monitor it said that I am using 50% of my cpu and 1/6th of my memory running both Blender and Firefox(to write this post). The machine is running no hotter than usual and the fans do not seem to be being stressed at all.
Does anyone know what could be causing the program to run so slowly?
View 2 Replies
View Related
Jul 29, 2011
I'm running a Minecraft server off of a dell T110 with Ubuntu 10.1 installed, as I haven't had a chance to install Natty yet. The problem is, it's running very very slowly, past the point where I could say it's the hardware's issue.
I have an intel xeon (2.4ghz quad core) in there, with 2gb of RAM. 2gb isn't much, but the computer runs slowly even when the MC server itself is off.
I'm talking super super slow, like, the cursor doesn't even show up all the time. It disappears frequently and things take a while to render/open, a site like facebook takes about 20 seconds to completely load.
This is my first ubuntu install, so I'm kind of new to it. The only problem/solution I could think is that I may have installed the 32bit version on a 64bit processor. I don't think I did, butttt that's the only thing that occurs to me
View 3 Replies
View Related
May 9, 2010
I'm running Vim 7.0 on Debian Etch. The system is between 2-3 years old. Over the past week or so, when I open vim, the document opens very slowly -- on the order of 6-7 seconds... I ran 'time vim', then exited the document as quickly as I could (I figure it probably took less than a second to type ':x<enter>')How do I figure out what changed to cause this problem? It's not outside the realm of possibility that I installed something on the system that caused this, although I never noticed a correspondence between installation and the slowdown in vim. I'm not even exactly sure what I've installed over the last week.
View 2 Replies
View Related
Jan 3, 2010
I have scrolling speed problem on my mouse, however it s working sometimes when i restart OS i mean it s working slowly as it should. But it s random dont know whats wrong with sometimes it s scrolling so fast and thats killing me u know it s really so hard to use it when browse something on web-pages. Weird part is how it s working ok when i restart OS.
View 1 Replies
View Related
Jan 17, 2010
I try to do anything in wine, including winecfg, I get a lot of errors, and the program runs really slowly. Here are the errors
Code:
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
fixme:win:RegisterDeviceNotificationA (hwnd=0x147f30, filter=0x84e9e4,flags=0x00000001),
returns a fake device notification handle!
fixme:advapi:RegisterTraceGuidsW (0x100778a, 0x100a060, {485e7de8-0a80-11d8-ad15-505054503030}, 1, 0x33fe28, code....
I get this error for every program, so I do not think it is an error with the program. If fixing this will change anything like making it faster any help would be appreciated. Oh, I also can only run a few programs. I can't run things like WMP or itunes, and I think this may be the cause.
View 2 Replies
View Related
Feb 11, 2010
Has anyone else noticed that Firefox started running incredibly slowly?It just happened on two of my computers (one 9.10, the other 8.04 LTS).After starting firefox, it just sits and sits while trying to load a page. Even a local page (my router's config page). It literally takes about 5 minutes to load URL...Other internet apps are working fine, including Opera, which is how I'm writing this.
View 5 Replies
View Related
Jan 25, 2011
i am new for using linux OS ,,i am installed ubuntu 10.04 with gnome , all think was rights but when i change to KDE desktop the operating system become very slowly ,
i have this PC information:
RAM: 4 GB
CPU: Core quad 2.666
VGA: Nvidia 9600 1G "it install"
as you see i have a good hardware then what is the problem?
View 9 Replies
View Related
Feb 21, 2011
After a period of time, the gnome nautilus responds very slowly and occupy high CPU and memory resource. when I open a folder, I have to wait for several seconds to see its response But there is no such problem under KDE environment.
View 5 Replies
View Related
Jan 9, 2011
Windows redraw very slowly when you move them, i.e. you move window and it redraws when you passed about half of the screen. Everything except that works fine as usual. Maybe anyone has any ideas what could happen?I have OpenSuse 11.3 with KDE 4.4.4, Radeon HD 4870 (proprietary drivers, but i've installed it long ago and it's likely not the problem).
View 7 Replies
View Related
Oct 12, 2010
I'm changing X's orientation with following command
xrandr -o left
xrandr -o normal
When orientation is changing screen becomes black for a moment then it switches orientation.So how to get rid of this black screen effect ? Maybe some other options should be added to xrandr ?
View 4 Replies
View Related
Jun 18, 2010
Is it just me or are others too experiencing this problem.Just installed the Solar theme for plymouth.....It works well without affecting the boot time....The only thing that is imperfect about it is that the progressbar moves extremely slowly and only completes 1/3 rd before Ubuntu boot
View 6 Replies
View Related
Mar 28, 2011
I have recently downloaded Ubuntu 10.10 and installed it onto my laptop, alongside with pre-installed Windows XP. I'm very happy with Ubuntu and find it a lot better than many other operating systems. However, I have stumbled across a problem recently: I don't seem to be able to suspend ("sleep") the laptop and neither can I hibernate it. These options worked so far and if I remember correctly, this started when I updated my kernel to 2.6.38. Since then, I've lost the options to sleep and hibernate, and when I close my laptop lid, I get a message "Unable to suspend".
Also, a side question - why does video run so slowly on Ubuntu using VLC? This happens to me when watching .mkv videos. Many frames get skipped and there are visible artifacts, in fact, so much that the video can barely be watched. Actual FPS drops below 1, so one frame stays on screen several seconds. I tried tweaking the options, choosing different demuxers, codecs and graphics output. This happens only while running on batteries and works fine under Windows, I have no idea why. Under Windows the video is played using Media Player Classic and ffdshow, if it makes any difference.
View 6 Replies
View Related
Feb 23, 2010
I have a fedora 12 server on which the time is advancing very slowly, 1 sec every 20 sec.Does anyone have an idea what is wrong
View 14 Replies
View Related
Mar 16, 2010
I'm using KDE Version 4.4.00 on OS11.2 all my browsers (konqueror, firefox, chrome) webpages loads painfully slowly on vista same connection, same machine is loading is faster. I did not notice this in OS11.1 on same machine.I tried disable IPv6 in boot and in firefox but it did not improve situation significantly. I still get long looking up of dns time after time.Am I "paranoid" or is there some way I can address this this slow loading issue?
View 9 Replies
View Related
Jun 23, 2010
I have Western Digital 1 TB external HDD. I had slackware 13 and it could copy data to it with speed around 30 MB/s (copy from machine to HDD) and it was cool. It's usb 2.0 as KInfoCenter says. But now in fedora 13, it's like 1 MB/s or even less (KInfoCenter still says usb 2.0). Any special mount option to set in fuseblk to speed it up? I mean something like blksize or like that?
Code:
/dev/sdc1 on /media/My Book type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
View 4 Replies
View Related
Aug 13, 2010
when i used firefox there was a up and down arrow at the side of a web page so i could scroll slowly up or down,i am now using peppermint ice and the default browser is chromium which i like but there is no up or down arrow,does anyone know if there is an extension to put the arrows there?
View 2 Replies
View Related
Mar 29, 2011
the web page will eventually open up or if i hit refresh 2.6.35.11-83.fc14.i686 bind version 9.7.3 i have disabled ipv6. using ie for browser.
[code]....
View 5 Replies
View Related
Jun 25, 2010
i run into a very annoying thing, usually take less than a second to connect to the internet using pppoe-start but today after a new installation of slackware 13.1 take a couple of secs to connect.
now:
# pppoe-start
Connected!
usually:
# pppoe-start
. Connected!
i'm using kernel-generic-smp-2.6.33.4, i even rebuilt the rp-pppoe package but it's the same thing. same behaviour was also in the previous release using kernel 2.6.29.6 due the broken forcedeth in that version of kernel, but on ArchLinux using the same version of kernel works normally.
View 1 Replies
View Related
Oct 23, 2010
I am currently using slackware-current with fluxbox is my window manager. I aim to have a light weight environment. But xpdf renders pdf very slowly. Are there any one having this issue before. As alternative, i have to install wine and use Sumatra PDF.
View 12 Replies
View Related
