I am trying to install bugzila on CentOS release 5.5. In that process I have to install perl package Digest::SHA. I did it through yum (Doesnt seems to be recognized by cpan and bugzila)
I am not sure why cpan and bugzila are not recognizing the module and where is the mistake. I am unable to interpret why make file is having problem in cpan Can any one throw some light on what exactly is going wrong with my install
This is installed and I get this error. I am attempting to install razor-agents 2.84 and get this error along with: Warning: prerequisite URI::Escape 0 not found.
Both of these were install in CPAN. When I attempt to install them again, they say they are up to date.
I am building an active directory and using BIND9 as my DNS. To allow for secure dynamic updates from the domain, I am enabling GSS-TSIG as detailed here and here. Unfortunately, some of the commands and configurations used here seem to be depreciated, at least in the newer versions that I'm using. My issue is one of keytab encryption. I generated a keytab using ktpass.exe on the Windows Server 2008 domain controller. I have tried DES/MD5, AES128/SHA1 and AES256/SHA1, each have been turned down by ktutil on the kerberos server (FreeBSD). Each time, it outputs the following error: ktutil: AES256/SHA1*: encryption type AES256/SHA1* not supported *Respective to encryption used.
I cannot find a list of suitable encryption schemes that ktutil will accept. The FreeBSD handbook details a means of producing a keytab file, but I'm not sure how to configure the Domain Controller to use the keytab.
Trying to clean up my system having removed some factory repos so now I have the standard 4, update, oss, non-oss & packman. When updating and switchine to packman I get many Wrong Digest errors and when downloading many NO KEY messages.
What is the significance of the no key message. How can I renew keys from repo sites and what should I do about the Wrong Digest warnings?
I have problem installing Suse on vmware, after checking media i got "wrong digest" even if i try to skip this i got md5 checksums errors. The best I use DVD' SLED 11 and SLES 11 from course i was some time ago (in both the same error). I thought maybe something wrong with my dvd in laptop (GSA-4082N) but i tried on my old PC with same result.
I'm updating a newly installed openSUSE 11.2 64bit and in the process the checksum of a delta package called "yast2-ncurses" fails. The rest of the update went without warning.Reading through the forums I found that I should check the installation media and I did - the dvd contains no errors. The list of repositories is the default one with the dvd turned off.
I recently reinstalled my workstation from OpenSuse 11.2 to 11.4. After the installation, I found that I could not run zypper anymore. A few things to note first.
- OpenSuse 11.4 x64 - behind corporate firewall (which worked fine with zypper as long as a proxy was configured with previous versions
- used that ZYPP_ARIA=0 variable previously to help). - proxies configured in /etc/sysconfig/proxy. - all other network utilities I normally use (browser, ssh) all work fine. - I have removed all repositories and added them again several times. I have also done "zypper clean" several times not that I would expect that to be better than removing and re-adding the repositories. When I attempt to run "zypper ref" or "zypper in foo" I get the following:
[code]...
If I manually use wget to grab the package and either run it directly or insert it into the /var/cache/zypp tree (replacing the metalink version zypper complains about) it always works and gives me the right file.....
When I run:Quote:mount -t davfs http://xxxx/webdav /home/USER1I get:Quote:Please enter the username to authenticate with serverhttp://xxxx/webdav or hit enter for none.
Username: USER1 Please enter the password to authenticate user USER1 with server http://xxxx/webdav or hit enter for none.
OpenPGP Standard RFC 4880, not really a Linux Question, but as may be using GnuPG on Linux I thought I would ask here
The Modification Detection Code Packet is defined to use SHA-1, even though it does state in section 13.11. that this can be altered, and gives example methods. However this would cause interoperability, (q1)so I assume there is no standard method of doing this??
- How much of a threat do you believe this to be? Even though the SHA-1 hash is encrypted within the symmetrically encrypted integrity protected data packet.
Just setup an Apache2 server, and I would like to setup a login. I also wanted to use the same method that is setup for vsftpd For vsftpd I've created a mysql database.... structured as:
Code: mysql> use vsftpd Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> describe accounts;
is there anyone who checked your downloaded file against the provided key? i have successfully downloaded the Fedora-12-i386-DVD.iso several times, but the SHA1 is not the one in Fedora-12-i386-CHECKSUM is there anyone who has the same problem? the SHA1 i calculated is: 0dc8ed436f0b44874454a379e8de5ad057c0115d
also, performance is an issue for me, since i need to get the info out of 10m files (approx 6TB), so commands like find are preferred and less iterations among commands would be great too.
There are md5 and/or sha1 checksum files for the CentOS 5.5 ISO files, e.g. "part 1 of X". However there is no checksum for the combined ISO file. I believe we can check the media at boot time, but it would be nice to have a checksum for the combined ISO's and not just the individual pieces. Any file system should do an error free copy, but there is always the possibility of a copy not happening correctly. Is there any official source for the checksum files I'm looking for? There are sums for CentOS-5.5-x86_64-bin-DVD-1of2.iso and 2of2.iso but nothing for CentOS-5.5-x86_64-bin-DVD.iso.
x86_64 media and their sha1sums are: 0c27f508728f6a96f50e4201cd770fe9e57af3e2 CentOS-5.5-x86_64-bin-1of8.iso ff57db0cf9af9bfc65471f49444ea92cdc238347 CentOS-5.5-x86_64-bin-2of8.iso 0faf38976fbf4053180a25f7535d66b084092059 CentOS-5.5-x86_64-bin-3of8.iso b097bf9b747f2d16da00ff29f1e0d40b523b0a55 CentOS-5.5-x86_64-bin-4of8.iso f1179ec875c0b4792e56f660493e82f0aff5e0f3 CentOS-5.5-x86_64-bin-5of8.iso 009892c8de408dc091e5a96b4a4ab213f2d5fe17 CentOS-5.5-x86_64-bin-6of8.iso 9660e63bd06a68ce94fe98defae1a0806ab834ae CentOS-5.5-x86_64-bin-7of8.iso 80c74ca2622b9aee3621a13a0cf6dbdc7743b4ee CentOS-5.5-x86_64-bin-8of8.iso a85d7cd41f49f2146177dae52163d5dca276efc2 CentOS-5.5-x86_64-bin-DVD-1of2.iso bb9a2c140170f10ed854541004539890ef7c68c8 CentOS-5.5-x86_64-bin-DVD-2of2.iso 3a04aa81ef75f329bf245a8c4f02af8137a84fb8 CentOS-5.5-x86_64-LiveCD.iso 231af7ca726557634a1f4d4f57436aab5a75f3b4 CentOS-5.5-x86_64-netinstall.iso
The MD5 sum I get is: ; SlavaSoft Optimizing Checksum Utility - fsum 2.52.00337 ; Generated on 01/01/11 at 10:54:56 ; 9b0d108cb3a80a9ce1eb9c3bcde0aceb *CentOS-5.5-x86_64-bin-DVD.iso
The SHA1 sum I get is: ; SlavaSoft Optimizing Checksum Utility - fsum 2.52.00337 ; Generated on 01/01/11 at 11:12:17 ; 40d11a8901a6af0c295a284b17dcdb66a83dc070 ?SHA1*CentOS-5.5-x86_64-bin-DVD.iso
it is about the program sha1sum to create SHA1-hashes. As you probably know, SHA1-Hashes do have the length 20 byte. So when I just type:
Code: sha1sum myfile
it produces an output of
Code: (some20byte) myfile
just as it should. Now I want to store the 20byte hash in another file, I use this command:
Code: sha1sum myfile | awk "{print $1}" >> myhash
Unfortunately I'm not familiar with awk, but this should cut off the end of the sha1sum output, which is the name of the file again. The problem here is: The newly created file myhash has the size 41 bytes, and printing it out I can see that it is not the original hash (I wrote a little program to print it bytewise).
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
Im not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
when i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed. Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
I've successfully downloaded openSUSE-11.4(64-bit) ISO image from the openSUSE site,and burned the ISO image successfully into 2 DVD's separately using Nero(ver.7) But I am unable to boot up from the DVD. When I pop in the DVD into my DVD-writer,a few seconds go by with the blinking cursor,and eventually boots off to Windows.The BIOS setting of my machine has been enabled to boot from CD/DVD first before HDD. No error messages are shown while I try to boot. The burned ISO image file is O.K. as it gets successfully verified after writing on the DVD. The image file {openSUSE-11.4 (64-bit)}being 4.29GB in size
