This is installed and I get this error. I am attempting to install razor-agents 2.84 and get this error along with: Warning: prerequisite URI::Escape 0 not found.
Both of these were install in CPAN. When I attempt to install them again, they say they are up to date.
I am trying to install bugzila on CentOS release 5.5. In that process I have to install perl package Digest::SHA. I did it through yum (Doesnt seems to be recognized by cpan and bugzila)
1. yum install perl-Digest-SHA
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: mirror.ubiquityservers.com
* base: mirrors.cmich.edu
[Code]...
I am not sure why cpan and bugzila are not recognizing the module and where is the mistake. I am unable to interpret why make file is having problem in cpan Can any one throw some light on what exactly is going wrong with my install
I am struggling to get dspam to work properly.
I have follow the instructions [URL] to the letter but when I send spam/ham to the ham@mydomain.net address I see a problem in the logs.
The problem appears to be that when dspam filters the mail it stores the digests in:
/var/spool/dspam/data/mydomain.net/<user>
But when it tries to find the digests to add them to the spam/ham database it looks in:
/var/spool/dspam/data/local/<user>
But I can not find anywhere in the config that controls this.
As I followed the instructions on the ubuntu forums I can not be the first person to see this problem.
logs:
Quote:
Apr 7 22:27:02 rat postfix/smtpd[19662]: connect from localhost[127.0.0.1]
Apr 7 22:27:02 rat postfix/smtpd[19662]: EAC8AE0B6A: client=localhost[127.0.0.1]
Apr 7 22:27:03 rat postfix/cleanup[19659]: EAC8AE0B6A: message-id=<0D3D54F4-4E18-4EE8-88F7-DE7D4B9A45C2@mydomain.net>
[Code].....
I installed Nagios on my Ubuntu 10.04 server using apt-get and when I accessed the web console, everything was OK. I made some changes to apache (creating some new virtual sites) and since then Nagios gives me a warning message for HTTP with the message, HTTP WARNING: HTTP/1.1 404 Not Found. The sites that I created are working perfectly. I noticed that the attemps are 4/4. Does this need to be reset or does Nagios automatically reset that once it detects the issue is resolved?
View 1 Replies View RelatedI am building an active directory and using BIND9 as my DNS. To allow for secure dynamic updates from the domain, I am enabling GSS-TSIG as detailed here and here. Unfortunately, some of the commands and configurations used here seem to be depreciated, at least in the newer versions that I'm using. My issue is one of keytab encryption. I generated a keytab using ktpass.exe on the Windows Server 2008 domain controller. I have tried DES/MD5, AES128/SHA1 and AES256/SHA1, each have been turned down by ktutil on the kerberos server (FreeBSD). Each time, it outputs the following error: ktutil: AES256/SHA1*: encryption type AES256/SHA1* not supported *Respective to encryption used.
I cannot find a list of suitable encryption schemes that ktutil will accept. The FreeBSD handbook details a means of producing a keytab file, but I'm not sure how to configure the Domain Controller to use the keytab.
I have installed ubuntu Server 9.10 [ubuntu-9.10-server-i386]in ma machine. After giving the command startx i couldnt goto gui . It saying x session : warning: x rdb command not found resource not merged.
View 1 Replies View Relatedrpm -ivh httpd-2.0.59-1.i386.rpm
warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27
error: Failed dependencies:
libapr-0.so.0 is needed by httpd-2.0.59-1.i386
libaprutil-0.so.0 is needed by httpd-2.0.59-1.i386
[code]...
I am trying to compile and install a new kernel. I have downloaded the 2.6.37 version from kernel.org and I have extracted it in usr/src/linux-2.6.37/ folder.I have tried to compile it and install it according to the instruction given in the following web site and which I found very useful:ttp://www.digitalhermit.com/linux/K...WTO.html#INTRONevertheless, I am encountering some problems during the make install modules process as I get some warnings (i.e. The title of this post).I thought to ignore the warnings and continue by copying the modules in /lib/modules/linux-2.6.37 but this is not possible since at that directory there is no folder created with the new kernel I am trying to install and thus I get a msg saying: FATAL: could not load /lib/modules/2.6.37/modules.dep.
The warning message: WARNING: modpost: found X section mismatch(es) suggests to run a make CONFIG_DEBUG_SECTION_MISMATCH=y.At the moment I am running a make again and saving the output to a file so that I can see later on what are the mismatches that I get. In any case we are talking about more than 50 mismatches so I am wondering if these mismatches are not that serious and the problem I cannot install and copy the modules is something else
Every time I open my terminal a warning message shows up. The warning is the following:
Code: Select allwarning: output DFP2 not found; ignoring
There is no output DFP2 in my system. I ran xrarndr and the outputs are the following:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.00*+
1680x1050 59.95
1600x900 59.98
1280x1024 75.02 60.02
[Code] ......
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.00*+ 50.00 59.94
1680x1050 59.88
1600x900 59.98
1280x1024 75.02 60.02
[Code] ....
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
I'm stepping out with LDAP for the first time. It's up and running. My Question is really closer to DB4, the Berkely database. When I start the ldap service I get this output:
# service ldap restart
Stopping slapd: [ OK ]
Checking configuration files for slapd: bdb_db_open: Warning - No DB_CONFIG file found in directory /var/lib/ldap: (2)
Expect poor performance for suffix dc=example,dc=com.
config file testing succeeded
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies View RelatedI installed TeXlive 2010 and when i compile this command pdflatex it shows the following error:
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr:/usr/share/texlive:/usr/bin/share/texmf-local/web2c:/usr/share/texmf-local/web2c:/usr/share/texlive/share/texmf-local/web2c:/usr/bin/texmf-local/web2c:/usr/texmf-local/web2c:/usr/share/texlive/texmf-local/web2c:/usr/bin/share/texmf/web2c:/usr/share/texmf/web2c:/usr/share/texlive/share/texmf/web2c:/usr/bin/texmf/web2c:/usr/texmf/web2c:/usr/share/texlive/texmf/web2c.
i installed slackware current straight(make iso from it and installed on clean disk) and i installed Multilib current from alien and now when i wanna compile wine source its write
"configure: OpenCL 32-bit development files not found, OpenCL won't be supported.
configure: libsane 32-bit development files not found, scanners won't be supported.
configure: gstreamer-0.10 base plugins 32-bit development files not found, gstreamer support disabled
[code].....
I checked i got that libaries in /lib and /lib64 why it doesent work it was working on slackware 13.1 with multilib
I have WD external hdd (80GB) formatted with fat32. I was using this hdd to transfer the data from computer A (LINUX, RH9) to computer B (Win7).
I was keep copying and deleting the data in the WD hdd during the data transfer because the amount to transfer is more than 300GB.
After doing this several times (and the WD drive was emptied), comp. A said the disk is full. I checked using 'df' and it was really full but 'ls -la' shows that there is no data in it.
I checked it in comp. B, and it showed empty. I tried to format in comp. A using 'mkdosfs -F 32 /dev/xxx# (block#)', but showed an error message like below.
'Warning: block count mismatch: found 78xxxxx but assuming 0'.
I found a similar situation in this forum metioning 'possible damaged linux kernel (not exactly same expression though)', so I re-installed linux in comp. A, but the problem was not solved.
1. why the disk info. is showed differently in linux and win7
2. why I cannot format it
I am still learning the ropes on Ubuntu server. I am trying to set up samba, but when I use the "gedit" command, I get this error:
GTK-WARNING **: cannot open display
I had installed the gedit command by using apt-get and aptitude, but still no luck. I am using virtualbox to test Ubuntu Server 9.10.
When I run:Quote:mount -t davfs http://xxxx/webdav /home/USER1I get:Quote:Please enter the username to authenticate with serverhttp://xxxx/webdav or hit enter for none.
Username: USER1
Please enter the password to authenticate user USER1 with server
http://xxxx/webdav or hit enter for none.
[code]....
I am getting following error messages when trying to re-start the apache2 on Ubuntu Server 10.04.
[warn] The Alias directive in /etc/squirrelmail/apache.conf at line 1 will probably never match because it overlaps an earlier Alias.
[warn] The Alias directive in /etc/phpldapadmin/apache.conf at line 3 will probably never match because it overlaps an earlier Alias.
...waiting [warn] The Alias directive in /etc/squirrelmail/apache.conf at line 1 will probably never match because it overlaps an earlier Alias.
[warn] The Alias directive in /etc/phpldapadmin/apache.conf at line 3 will probably never match because it overlaps an earlier Alias.
[OK]
I installed Ubuntu 10.04.1 Server x86_64 minimal, updated, upgraded, then I blacklisted all not used modules in /etc/modprobe.d/blacklist.conf:
[Code]..
System information disabled due to load higher than 1. What caused that ? It is a test system in VirtualBox.
exportfs outputs the following error upon restart or after editing /etc/exports.
Code:
'exportfs: Warning: /exports does not support NFS export.'
here is my info and configs.
[code]....
I have installed cpulimit tar archive software on my suse linux DesktopI can limit any process upto a max cpu percentage uses with its pid with below command.# cpulimit -p <pid> -l <percentage>It is working i have tested.But when i run this command for a executable script with following command# cpulinit -e /<path with script file> -l <percentage>it shows message "Warning: no target process found. Waiting for it." though thatscript is running at that time.what could be the issuse.How can i rectify that problem
View 2 Replies View RelatedI recently reinstalled my workstation from OpenSuse 11.2 to 11.4. After the installation, I found that I could not run zypper anymore. A few things to note first.
- OpenSuse 11.4 x64 - behind corporate firewall (which worked fine with zypper as long as a proxy was configured with previous versions
- used that ZYPP_ARIA=0 variable previously to help). - proxies configured in /etc/sysconfig/proxy. - all other network utilities I normally use (browser, ssh) all work fine. - I have removed all repositories and added them again several times. I have also done "zypper clean" several times not that I would expect that to be better than removing and re-adding the repositories. When I attempt to run "zypper ref" or "zypper in foo" I get the following:
[code]...
If I manually use wget to grab the package and either run it directly or insert it into the /var/cache/zypp tree (replacing the metalink version zypper complains about) it always works and gives me the right file.....
Had to happen I guess - cheap cracking on the cloud; see here
View 14 Replies View RelatedOpenPGP Standard RFC 4880, not really a Linux Question, but as may be using GnuPG on Linux I thought I would ask here
The Modification Detection Code Packet is defined to use SHA-1, even though it does state in section 13.11. that this can be altered, and gives example methods. However this would cause interoperability, (q1)so I assume there is no standard method of doing this??
- How much of a threat do you believe this to be? Even though the SHA-1 hash is encrypted within the symmetrically encrypted integrity protected data packet.
I just downloaded CentOS-5.5-i386-bin-DVD.iso from a mirror and there is no check sum file or hash for
this ISO. The md5sum.txt file contains:
[Code]...
Trying to clean up my system having removed some factory repos so now I have the standard 4, update, oss, non-oss & packman. When updating and switchine to packman I get many Wrong Digest errors and when downloading many NO KEY messages.
What is the significance of the no key message. How can I renew keys from repo sites and what should I do about the Wrong Digest warnings?
Just setup an Apache2 server, and I would like to setup a login. I also wanted to use the same method that is setup for vsftpd For vsftpd I've created a mysql database.... structured as:
Code:
mysql> use vsftpd
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> describe accounts;
[Code]...
I am trying to insall CPAN, apparently I do this by typing CPAN at the command line.After much else, this results in
Code:
**UNRECOVERABLE ERROR**
Could not find gdlib-config in the search path. Please install libgd 2.0.28 or higher.
If you want to try to compile anyway, please rerun this script with the option --ignore_missing_gd.
Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
[code]....
I have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
is there anyone who checked your downloaded file against the provided key? i have successfully downloaded the Fedora-12-i386-DVD.iso several times, but the SHA1 is not the one in Fedora-12-i386-CHECKSUM is there anyone who has the same problem? the SHA1 i calculated is: 0dc8ed436f0b44874454a379e8de5ad057c0115d
[Code]...
I am trying to output md5 or sha1 along with fullpath/filename and file size but I dont seem to find a way to do this.
with
Quote:
find . -printf '%s %p'
i can retrieve size and fullpath and filename
however I am not able to merge that info with the md5 or sha1 of the file
my aim is to have a file such as this
6435b607f86b6e6be1e77bb3b1987677d1377275 ./abc/asda/file1.txt 404
6435b607f86b6e6be1e77bb3b987677d13772725 ./abc/asda/file2.txt 1404
also, performance is an issue for me, since i need to get the info out of 10m files (approx 6TB), so commands like find are preferred and less iterations among commands would be great too.
btw i've tried to use something like this
Quote:
find . -type f -printf '%s %p'| xargs awk '{x=system("md5sum "$2)}END {print x" "$2" "$1}'
but variable x contains the return value of the system command md5sum and not the stdout