OpenSUSE Network :: 11.4 Zypper Digest Verification Failed

May 17, 2011

I recently reinstalled my workstation from OpenSuse 11.2 to 11.4. After the installation, I found that I could not run zypper anymore. A few things to note first.

- OpenSuse 11.4 x64 - behind corporate firewall (which worked fine with zypper as long as a proxy was configured with previous versions

- used that ZYPP_ARIA=0 variable previously to help). - proxies configured in /etc/sysconfig/proxy. - all other network utilities I normally use (browser, ssh) all work fine. - I have removed all repositories and added them again several times. I have also done "zypper clean" several times not that I would expect that to be better than removing and re-adding the repositories. When I attempt to run "zypper ref" or "zypper in foo" I get the following:


If I manually use wget to grab the package and either run it directly or insert it into the /var/cache/zypp tree (replacing the metalink version zypper complains about) it always works and gives me the right file.....

View 1 Replies


OpenSUSE :: Refresh Failed: Error: Verification Of 'repomd.xml' In 11.0 System

Dec 9, 2008

I got the below copied error while the openSUSE Updater wanted to make 2 security updates today.


What should be the correct URL. My system has taken the URL from the YAST/Software/Add-On-Product/Community Repository and now it looks like it is not valid anylonger.

View 9 Replies View Related

OpenSUSE Install :: Upgrade From 11.1 To 11.2 Using Zypper Failed / Error While Loading Shared Libraries?

Dec 5, 2009

To upgrade my system from 11.1 to 11.2, I followed he instructions at:openSUSE Lizards � Updating in Place From openSUSE 11.1 to 11.2

However, it failed and now I am stuck with this error:

zypper: error while loading shared libraries: cannot open shared object file: No such file or directory

View 9 Replies View Related

OpenSUSE :: Errors Trying To Use Zypper (from Console) - GConf Error: Failed To Contact Configuration Server

Jun 30, 2011

i been getting errors when trying to use zypper from the console. This happens in 2 pcs, and errors seem to be the same,One has 11.4 + gnome 2, standar installation (with gnome) from 11.4 DVD. The error i get whenever i run something like zypper install xxxyyy.rpm or zypper update is:

GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)

the other one, 11.4 with gnome 3 (clean install from live dvd):

GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)

GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See GConf configuration system for information. (Details - 1: Failed to get connection to session: The connection is closed)

I dont know if its related, but the one with gnome 3 constantly gives me (what i think is) a kernel panic when i shut down the system, it happens fast and the text on the screen is not "linear" but spread all over the screen, so i cant read the whole message, but it does say something about glib and corruption.This is actually the first time(s) ibe seen a kernel panic ever since i used ubuntu.

View 9 Replies View Related

OpenSUSE Network :: 11.4 Zypper Cannot Resolve Repositories

Mar 28, 2011

I installed 11.4 from a verified and checked CD. Had and worked through the DSL and ipv6 problems discussed elsewhere in this forum. So browsers now work on the internet, but neither zypper nor yast will resolve the 11.4 repositories, so no refresh, no updates. Browsers bring up the repositories fine, so I can download and install an rpm that way, but it's not a life. Haven't been able to find this issue elsewhere, asis usually the case.

View 9 Replies View Related

OpenSUSE Network :: Zypper Repository Not Found But Can Access With Firefox

May 22, 2011

When I do "sudo zypper up" than it gives me error like this:

Retrieving repository 'openSUSE-11.4-Non-Oss' metadata []
File '/repodata/repomd.xml' not found on medium ''
Abort, retry, ignore? [a/r/i/?] (a):

But I can access Index of /distribution/11.4/repo/non-oss from firefox browser.(This is old problem from Opensuse version 11.0 when I first tested it.)

See screenshot here:

View 1 Replies View Related

Ubuntu :: Ssh Host Key Verification Failed

Feb 6, 2010

i'am running:

Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
kernel: 2.6.31-16-generic

pc and laptop are connected via switch. hard wired and static ip on ubuntu side is a wlan running connected to the internet. on my laptop: i am running:

Distributor ID: SuSE
Description: SuSE Linux 9.0 (i586)
Release: 9.0
Codename: n/a
kernel: 2.4.21-99-default ( year 2004 )

on unbuntu side i use: SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2. on suse side i use: SSH-1.99-OpenSSH_3.7.1p2. both sides are using: Protocol 2 and ServerKeyBits 768 and now my problem. i can connect from ubuntu to suse using ssh without a problem. when i try to connect from suse to ubuntu i always get: Host key verification failed and nothing else. no hint about middle man attack or so. no change to answer -> save the new key. the permissions of ~/ssh my both sides are id_rsa.pubcorrect i think ( drwx------) and the permissions of : authorized_key, id_rsa, known_hosts are all - -rw------- 1 ( not linked or so ).

View 2 Replies View Related

Ubuntu Networking :: Host Key Verification Failed?

Jan 30, 2011

I just installed openssh-server, and all tutorials say it should work out of the box. But it doesn't, it dies with "Host key verification failed."

Here is the log:

nick@rilmir:~$ ssh -vv localhost
OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *


View 9 Replies View Related

General :: Host Key Verification Failed / Resolve This?

Mar 29, 2011

I know that there are multiple threads with problems like this, but still i didn't found my answer.

The situation is like this:
I have a local server and a remote server, i did a ssh key swap so i can log on to the remote server with no problems (automatically logging on, no need to enter pass or login).
I've made a script that copies (with SCP) a file FROM the REMOTE server TO the LOCAL server (NOT FROM the LOCAL server to the REMOTE server !!!!), and then i get an error like code...

View 2 Replies View Related

Slackware :: Can't Ssh Into Slack 13.37 'Host Key Verification Failed'

Jul 14, 2011

I have Slack 64 bit installed on my desktop, sshd is running. From my netbook running Ubuntu I can not connect through ssh, I always get 'Host key verification failed' message. I have tried a lot of things, I got to a point where I could not ssh either way. So today I removed and re-installed Openssh on both systems. I made sure I was using the new ssh_config and sshd_config files on both systems. Right now I can ssh from the desktop ( Slack ) to Ubuntu ( netbook ) but not the other way around. I do not get a known_hosts file created on Slack, I do get one on Ubuntu. I don't understand why Openssh server on Slack is not accessible, and why the known_hosts file is not getting created.


is what I have installed. Most of the suggestions I have found suggest deleting the entry for the remote host. Problem is it never gets created. How do I go about fixing this? This is a link to the last howto I followed, after the re-install of Openssh. [URL]...

View 13 Replies View Related

General :: Certification Verification Is Failed / Don't Want To Terminate Operation

Aug 6, 2010

I am having an issue with HTTPS certification using curl. My curl is configured with OpenSSL. If the certification verification is failed I dont want to terminate the operation, instead I want to continue by just putting a log message. For this I have used OpenSSL SSL_CTX_set_verify() function to set my static C callback function. During HTTPS transaction, my callback is also getting called with first parameter 0 or 1 (depending upon of the certificate verification is success or failure). But even if my certification verification is failure, I want to continue. So I have hard coded to return value as 1 always from my callback function. But still I see the certification error and I don't get the page.

View 1 Replies View Related

Programming :: Use SSH In PHP Invokes 'Host Key Verification Failed' Error

Sep 27, 2010

Im trying to do a remote execution of scripts through SSH in PHP. What im doing:

-Use PHP in conjunction with nagios' check_by_ssh script to execute the script.
-I used


-It gives me a 'Host key verification failed' error even though i enabled it to ssh from my server to server01 without password. My Qn: How do i get it to work?

View 3 Replies View Related

OpenSUSE Install :: Wrong Digest Errors Using Packman Repo?

Oct 20, 2010

Trying to clean up my system having removed some factory repos so now I have the standard 4, update, oss, non-oss & packman. When updating and switchine to packman I get many Wrong Digest errors and when downloading many NO KEY messages.

What is the significance of the no key message. How can I renew keys from repo sites and what should I do about the Wrong Digest warnings?

View 2 Replies View Related

CentOS 5 :: Cannot Display Locations "sftp://" Host Key Verification Failed

Mar 12, 2010

I am running 5.4 64 bit I am trying to connect via ssh on a laptop running Ubuntu. I receiving this error. Cannot display locations "sftp://" Host key verification failed I searched around the web and some say that I should have a .ssh folder but I don't see one under the home folder. I re-installed ssh but I am still having problems.

View 2 Replies View Related

General :: Get A Certificate Error 60: "server Certificate Verification Failed" When Trying To Setup A Ubuntu Cloud?

Aug 24, 2011

I'm trying to install an Ubuntu cloud on my home network - I've been following this guide. When I arrived at STEP 6: Install an image from the store PART 3: Click on the Store tab I get the following error message on the page: Error 60: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

View 1 Replies View Related

OpenSUSE Install :: 11 On Vmware - Getting Media "wrong Digest" - Oryginal Dvds

Apr 24, 2011

I have problem installing Suse on vmware, after checking media i got "wrong digest" even if i try to skip this i got md5 checksums errors. The best I use DVD' SLED 11 and SLES 11 from course i was some time ago
(in both the same error). I thought maybe something wrong with my dvd in laptop (GSA-4082N) but i tried on my old PC with same result.

View 1 Replies View Related

OpenSUSE Install :: 11.2 Update "wrong Digest"?

May 18, 2010

I'm updating a newly installed openSUSE 11.2 64bit and in the process the checksum of a delta package called "yast2-ncurses" fails. The rest of the update went without warning.Reading through the forums I found that I should check the installation media and I did - the dvd contains no errors. The list of repositories is the default one with the dvd turned off.

View 5 Replies View Related

OpenSUSE :: Critical Zypper Bug ?

Sep 7, 2010

I don't know why but sometimes zypper (v1.4.5) removes some of the installed packages before upgrading them.

Actually it removes it even before downloading a newer version. I just wonder what a stupid f**k implemented this behavior. I wish something awful happens to him.

An hour ago I tried to update few packages, among those were sysconfig, firefox and yast. Guess what? Zypper removed those before downloading newer versions. Due to a temporary network connection loss zypper could not download packages and quit leaving me without firefox, without yast and, what's even worse, without sysconfig package which contains essential system scripts such as ifup, ifdown etc (so my network went down completely without a possibility to restore). It's a big luck there was no new package of rpm (or it would be removed by zypper too) so I could just download those packages with my second PC and reinstall them from a memory stick.

Now I'm interested where should I file this bug, because without a doubt it's a critical one.

View 9 Replies View Related

OpenSUSE :: Use Zypper To Do Job Of PackageKit?

Sep 12, 2010

OpenSuse 11.2 AMD64

My question - how can I use Zypper to do the job of PackageKit ? That is, install security and recommended updates. If possible, I would like to then remove PackageKit. Do you see any problems ?

View 4 Replies View Related

OpenSUSE :: KDE Fails After Zypper Up

Sep 14, 2010

Yesterday I performed a zypper up on my system. Stock KDE4 that comes with 11.3. After I restarted the computer, it would get about 4/5 the way through the progress bar that displays when first starting then lock up hard. Starting in safe mode works. With a little experimenting I found that typing x11failsafe to the boot up options line let me start without a problem also.

The sleazy workaround would be to add that parameter to the grub menu, but I'd rather have a real fix. Has anyone else seen this issue? Is there a fix for it?


View 4 Replies View Related

OpenSUSE :: How To Update The Via Zypper

Dec 6, 2010

updating via Zypper. Recently I decided to do all the system updates via Zypper, because I trust Zypper more than the other update mechanisms. since 2 days I always get the following message in the terminal, when I do


zypper up


The following package updates will NOT be installed:

gstreamer-0_10-plugins-base kcm_gtk kdebase4-openSUSE
kdebase4-runtime-branding-openSUSE kdebase4-workspace-branding-openSUSE
kdelibs4-branding-openSUSE kdm-branding-openSUSE kio_sysinfo


the packages mentioned in there are always the same, but I am more concerned about this message in general. In Ubuntu (which I used before) and in Debian, such a message meant, that you have to install some additional packages to resolve dependencies.


apt-get dist-upgrade

with this command the system installed the required additional packages and afterwards the packages which were listed as "will not be installed" so does this message in Zypper mean the same? Can I also do something like a "dist-upgrade" in OpenSuse, without bringing the whole system to (for example) 11.4, but to get all the updates including some new dependencies?

View 8 Replies View Related

OpenSUSE Install :: Run Zypper Dup In X Or Not?

Dec 6, 2009

I'm upgrading from 11.2 RC1 to the final release.

I searched here, but didn't find much in the way of tutorials. This page was the best I found: Upgrade openSUSE

That page indicates that I only need to run

zypper dup

Very simple, but is it complete?

Thinking it is not that simple, I put together my own list of steps and I'd like some feedback on whether all this is necessary. In particular, is it necessary to run zypper dup outside X? Are my steps too complex?

sudo -s
zypper lr --export backups/repos/foo.repo
zypper ref
zypper in zypper libzypp (nothing to do)


I solved that by going into yast and disabling the CD-based repository. How do you do this in zypper when the error message doesn't tell you the name of the offending repository? That error could be very confusing to someone who didn't realize that a CD-based repository would be responsible for this.

View 9 Replies View Related

OpenSUSE Network :: VPN Connection - Authentication Failed Error

Nov 14, 2009

I'm extremely new to SuSE Linux. I wanted to move away from Windows and so I decided to reload my Desktop with SuSE linux.I have had no trouble until now. I'm trying to connect to my work VPN connection. From my laptop (which unfortunately is Vista) I'm able to connect without any issues. However, when I tried out the KVPN application on my SuSE linux, it just doesn't work. I get the error:
Authentification has failed.
As a side note, when I type ping google, the packets are received 100% but when I ping my company address, no packets are received. Hope this info is useful.

View 9 Replies View Related

OpenSUSE Network :: Error Message - VPN Connection Failed

Jun 19, 2010

(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:


View 1 Replies View Related

OpenSUSE :: Updating Amarok With Zypper

Apr 22, 2010

I added Index of /repositories/KDE:/Backports/openSUSE_11.2 The says: If you just want the latest versions of e.g. amarok, digikam etc. you don't need to upgrade all of KDE, just add the Backports repo maintained by the openSUSE KDE Team. I want to update the Amarok to the new version (2.3) with zypper but I cant.


View 7 Replies View Related

OpenSUSE :: Make The Zypper Use Proxy?

Apr 23, 2010

the zypper calling aria2c download the file, but the speed is too slow, so, I want to use proxy.the aria2 is supported to use proxy ,but I cannot find where is the config file. I want to know how the zypper pass the parameter such as file name file target and anthor option when aria2 is calling by zypper

View 9 Replies View Related

OpenSUSE :: Use Zypper To Install 'Eclipse'?

Apr 24, 2010

I just got my repos back on the track. I looked for the eclipse platform in 'Yast->software management', still like 8 choiches to make. Can I use zypper again to install 'Eclipse'?

View 4 Replies View Related

OpenSUSE :: Zypper Hangs At Retrieval?

May 18, 2010

While trying to update my kernel as written here, "zypper up" hanged at retrieval.
The first row is where it hanged:

Retrieving: [error (0 B/s)]
Download interrupted by user
Abort, retry, ignore? [a/r/i/?] (a):


View 1 Replies View Related

OpenSUSE :: Can't Update Via YAST Or Zypper

Jun 10, 2010

Turned on my PC as soon as I got home & found that Factory repo had a whole bunch of updates, so I selected to 'switch system packages' & clicked accept.

Whatever I tried to download & install displays an error message

Have even deleted the factory repo & re-added, to ensure it wasn't a change of url causing problems.

I'm running 11.2 64bit KDE 4.4.3

View 8 Replies View Related

OpenSUSE :: Zypper R - Best Version Of Package

Jul 5, 2010

I installed R using zypper some time back, but then I read that I should have used a specific repository called Rpatched. So (note order) I added the repository, then remove R (called R-base) and then proceeded to install the package. Clearly in my repository list there is more than one source of R. Should I have removed the package first and then add the new repository? How in fact does zypper deal with different repositories when they all have the same package? I expect it might choose the most recent version. But what happens when the packages are patched? How does it determine the best version of the package to use?

View 1 Replies View Related

Copyrights 2005-15, All rights reserved