I have problem installing Suse on vmware, after checking media i got "wrong digest" even if i try to skip this i got md5 checksums errors. The best I use DVD' SLED 11 and SLES 11 from course i was some time ago
(in both the same error). I thought maybe something wrong with my dvd in laptop (GSA-4082N) but i tried on my old PC with same result.
Trying to clean up my system having removed some factory repos so now I have the standard 4, update, oss, non-oss & packman. When updating and switchine to packman I get many Wrong Digest errors and when downloading many NO KEY messages.
What is the significance of the no key message. How can I renew keys from repo sites and what should I do about the Wrong Digest warnings?
I'm updating a newly installed openSUSE 11.2 64bit and in the process the checksum of a delta package called "yast2-ncurses" fails. The rest of the update went without warning.Reading through the forums I found that I should check the installation media and I did - the dvd contains no errors. The list of repositories is the default one with the dvd turned off.
View 5 Replies View RelatedIs there some better way of getting my display size set to 1280x960 when I launch openSUSE 11.4 under VMware Server? Here's what I've done so far: I am running Windows 7 on an AMD Phenom II system (motherboard: Gigabyte 880GMA-UD2H). I installed VMware Server (version 2.0.2) so that I can run openSUSE 11.4. The initial install went pretty smoothly. However, the display size was set to 800x500. I attempted to set it to 1280x960 by changing the /etc/X11/xorg.conf.d/50-monitor.conf file as follows:
Code:
/etc/X11/xorg.conf.d/50-monitor.conf
Section "Monitor"
Identifier "Default Monitor"
## If your monitor doesn't support DDC you may override the
## defaults here
# HorizSync 28-85
# VertRefresh 50-100
HorizSync 1-10000
VertRefresh 1-10000
## Add your mode lines here, use e.g the cvt tool
Option "PreferredMode" "1280x960_60.00"
# 1280x960 59.94 Hz (CVT 1.23M3) hsync: 59.70 kHz; pclk: 101.25 MHz
Modeline "1280x960_60.00" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync
This resulted in a display size of 1734x1342 (or something close to that). I noted from the /var/log/Xorg.0.log file that the vmwlegacy driver is being used instead of the vmware svga driver. There is a note that the vmwlegacy driver does not support the "PreferredMode" setting in the monitor section of the xorg.conf files. For the time being, I have set my horizontal and vertical rates to 60kHz and 60Hz, respectively. This does limit the maximum display size to 1280x960, but for all the wrong reasons. How do I set up my system to get the correct display size?
Used to run Gentoo, years ago, getting back on the linux train. Anyways, got a new media pc and am having some troubles getting it to function. I am using ImageWriter, an OCZ Rally 4gb flash drive and have tried both HTTP and BitTorrent downloaded copies of 11.3 with the same md5sum check wrong error. What am I doing wrong? Is it because it thinks it is a CD or am I getting bad copies of the ISO? I am so out of practice I can't remember anything about installation anymore and am at a loss.
View 5 Replies View RelatedI am struggling to get dspam to work properly.
I have follow the instructions [URL] to the letter but when I send spam/ham to the ham@mydomain.net address I see a problem in the logs.
The problem appears to be that when dspam filters the mail it stores the digests in:
/var/spool/dspam/data/mydomain.net/<user>
But when it tries to find the digests to add them to the spam/ham database it looks in:
/var/spool/dspam/data/local/<user>
But I can not find anywhere in the config that controls this.
As I followed the instructions on the ubuntu forums I can not be the first person to see this problem.
logs:
Quote:
Apr 7 22:27:02 rat postfix/smtpd[19662]: connect from localhost[127.0.0.1]
Apr 7 22:27:02 rat postfix/smtpd[19662]: EAC8AE0B6A: client=localhost[127.0.0.1]
Apr 7 22:27:03 rat postfix/cleanup[19659]: EAC8AE0B6A: message-id=<0D3D54F4-4E18-4EE8-88F7-DE7D4B9A45C2@mydomain.net>
[Code].....
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedWell I am new to Linux. Do we have different media like CDs or DVDs for desktop and severs
View 3 Replies View RelatedI am trying to install bugzila on CentOS release 5.5. In that process I have to install perl package Digest::SHA. I did it through yum (Doesnt seems to be recognized by cpan and bugzila)
1. yum install perl-Digest-SHA
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: mirror.ubiquityservers.com
* base: mirrors.cmich.edu
[Code]...
I am not sure why cpan and bugzila are not recognizing the module and where is the mistake. I am unable to interpret why make file is having problem in cpan Can any one throw some light on what exactly is going wrong with my install
I recently reinstalled my workstation from OpenSuse 11.2 to 11.4. After the installation, I found that I could not run zypper anymore. A few things to note first.
- OpenSuse 11.4 x64 - behind corporate firewall (which worked fine with zypper as long as a proxy was configured with previous versions
- used that ZYPP_ARIA=0 variable previously to help). - proxies configured in /etc/sysconfig/proxy. - all other network utilities I normally use (browser, ssh) all work fine. - I have removed all repositories and added them again several times. I have also done "zypper clean" several times not that I would expect that to be better than removing and re-adding the repositories. When I attempt to run "zypper ref" or "zypper in foo" I get the following:
[code]...
If I manually use wget to grab the package and either run it directly or insert it into the /var/cache/zypp tree (replacing the metalink version zypper complains about) it always works and gives me the right file.....
Having issues getting my external dvd drive to play nice with 10.10. The usual horses have been beaten thoroughly.
1.) I've installed Medibuntu
2.) I've grabbed libdvdcss2, libdvdread, run the install script, etc., etc.
3.) I've attempted to check the region, with no avail.
When I try a regionset, it offers the following complaint:
ERROR: Could not open disc "(null)"! Please ensure there is a readable CD or DVD in the drive.
4.) The drive and disc(s) are all operational, as they work on different partitions and/or machines fine.
VLC/Totem will, briefly, open the menu for a given DVD. The menu video will briefly play, sputter, then die, which sounds like a region issue.
Any idea why the regionset isn't working? Perhaps it's not mounting right?
I've been a SuSE user since 6.3 days. I just built 2 more old PCs to learn DRBD, and they only have CD drives (not DVDs). To my chagrin I just found out that there are no 11.3 install CDs? These old computers can't boot from USB either so I can't stick the DVD on a USB drive. Or am I just missing the installation CDs somewhere? I did some searching on the download site and in these forums but came up empty.
View 8 Replies View RelatedI've a physical machine with FC9 running vmware server 1.0.6 with 2 virtual machines. Each virtual machine is also running FC9. Everything was running smoothly until one day, one virtual machine stop. I've checked /var/log/messages of that machine and it says:
Code:
"no space left on device"
.
I try to create a file
Code:
touch dd
and the answer is the same.
The odd thing about all this is that the machine (both virtual and physical) have enough space left. This is the space available reported by df -h. Physical machine
Code:
[root@halwifi hotspot]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
228G 38G 179G 18% /
/dev/sda1 190M 19M 162M 11% /boot
tmpfs 1010M 96K 1010M 1% /dev/shm
and the Virtual Machine
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
8.7G 3.6G 4.7G 44% /
/dev/sda1 190M 19M 162M 11% /boot
tmpfs 379M 0 379M 0% /dev/shm
Every time I try to do something, I always get: "no space left on device".
I practice a little linux but I am just beginning. I have at work an old Dell PowerEdge 1750 on which there is no DVD player but only one CD. I would like to install opensuse 11.2 on it. I want at any price for the facility, minimize the use of the Internet in order not to overload the bandwidth of the job which is intended primarily for other things. The bios of the server does not boot from USB ports (the solution of a key or a USB bootable disk is not possible). - I could install from the live CD and then via internet download software that I miss. I did the first part of this but I find myself with opensuse in English, which is not the intention. I then tried to Frenchify but I can not do it properly. - I told myself then that I might start trying from a net install cd of opensuse, but I can not indicate which parameter to tell him to pick up the DVD iso image on a opensuse USB hard drive. - I might be as always from the net install tell it to fetch the files on a local or network drive on a local network resource, but I do not know how.
View 2 Replies View RelatedI install CentOS5.5 on VMWARE,the system is working properly.I want to test reinstall CentOS5.5 on VMWARE,So,I make a snapshot.My system partition（Manually partition ）is:/(1G),/boot(512M),swap(2G),/usr(30G),/var(10G),/data(20G).Each partition is independent of the ] partition.I reinstall CentOS5.5 by CentOS5.5.ISO.I format / partition,and other partition unchanged.However, the installation process was wrong:
==============================================================
Package Installation
Error running transaction[code]...
How I can reinstall CentOS（Do not lose important data）？Does there have any authoritative description？
I put this in the General Help section since this potentially deals with multiple things. Without further ado...On my Desktop, My host OS is Windows 7 while thru VMware i have Ubuntu as a Guest OS. I know it's easier to just use Ubuntu solely on the Desktop to host it as a media server, but for certain reasons (family and friends mostly) I'm using VMware instead. My goal is to use my Ubuntu OS thru VMware for others in my household to access it. So far, my Windows host can pick it up the media it's sharing, but not the rest of the network. I know it has to do with the NAT that VMware uses, but what's the best way to configure it to where other laptops, and ps3's on the network can see it?
View 1 Replies View RelatedAfter a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
I have a desktop with nvidia 9300 connected to a 37" LG hdtv lcd with a VGA analog cable. I'm using this machine as a media center. Up until now it had a windows XP and (besides the fact that it had windows) it work with the correct resolution - 1920x1080. I've installed Ubuntu (the latest available) after to many crashes during hd movies...
I installed the nvidia restricted drivers (the display is plain black otherwise) and my tv is being recognized as a CRT monitor. Guess it's because I'm using the vga connector instead of the dvi one. The problem is that the highest resolution it let me choose is 1024x768. I tried to mess around with the xorg.conf but i discovered it doesn't exist.
The crash happened when I was reading a web page and the screen went black and the mouse pinterr dropped to the middle of the bottom of the screen and froze. I had to do a warm reboot to get going again. I'm using 11.4 with KDE.This is the section of the /var/log/messages from around the time of the crash at 16.42/16.44.
View 9 Replies View RelatedIs it possible sitn opensuse 11.2 to install vmware server or another free vmware?
View 9 Replies View RelatedI can't get Vmware Workstation 7.1 to install on 11.3.
Nothing to be found in VMware logfiles, the installer just rolls back the installation.
Is there anyone who has any idea on how to make it work?
(I install all the required modules by the way)
I'm thinking about installing OpenSuse 11.3.
Before loosing a long time... install VMWare Server on OpenSuse 11.3?
i am using Open Suse 11.4 as VMWare guest, I installed the Open Suse on the Guest using the Live CD and when I am trying to install vmware-tools am getting an error that its not able to find the linux-headers I have installed all other prereq's using zypper, when i try to do zypper in linux-kernel-headers am getting this error
Loading repository data...
Reading installed packages...
'linux-kernel-headers' not found in package names. Trying capabilities.
'linux-glibc-devel' providing 'linux-kernel-headers' is already installed.
Resolving package dependencies...
resolve this ? Is there any way i can specify the linux-glibc-devel' providing 'linux-kernel-headers' for the vmware tools so that the installation is completed successfully
i just installed 10.10 on my girls laptop (Acer Aspire 5735z) hoping it would fix the old problem i had with playing real dvd's. it didnt. it keeps saying "Could not read from Resource". when i try with VLC is say "Could not read from file". but if i put in a burned movie, it plays fine. i checked and it has libdvdcss2, libdvdnav4, and libdvdread4 installed. i get the same problems with my laptop (toshiba portege m400 tablet) which runs fedora 13.
View 5 Replies View RelatedThe /etc/profile said that i should do that in /etc/profile.local.I create /etc/profile.local, set the aliases, then i reboot.Now i've got a broken bash enviroment. Prompt has gone, ls colors gone, useful aliases (md=mkdir) gone.I've got this prompt: 'bash-4.0$' instead of the 'username@hostname:actual dir'.The root account has got the same errors, so i think i broke something system-wide.I removed the profile.local but the problem stays.What should i do to regain the standard bash enviroment?
View 4 Replies View RelatedWhat the right place to report errors in package descriptions ? There are more than two dozens categories mentioned on the openSUSE "reporting a bug" web page but none of them seem to fit. The packager of the concerned rpm is bugs.opensuse.org, no email printed out when launching rpm -qpi <package name>.
View 2 Replies View RelatedI'm just using a plop boot cd...it does what I need, boot from hdc 2. or (hd2,1) I'm having an issue, because Im not sure how to change the mbr so when I boot the computer from the third hdd, it just works...where is the MBR, and how do I edit it, or better, is there a GUI interface I can use?
View 9 Replies View RelatedI wrote a few minutes ago open Suse 11.04 instead 11.4, I got confused with Ubuntu's last version.
View 2 Replies View RelatedSince I've installed opensuse 11.4 instead of 11.3, I cannot install .rpm packages nor execute updates. I get the following message: "There has been a (probably temporarily) when connecting to the software source/repository" (own translation) details: Media source [URL] does not contain the desired medium So, probably there is something wrong with my software sources. Could anyone give a suggestion to repair this since I'm not a linux expert and would like to install new software on my newly updated machine.
View 9 Replies View RelatedI need to install GRUB on my USB-drive. I've gone through variety of manuals and articles but I have strange errors during install.
1) Insert USB in my laptop.
2) My OpenSUSE automatically mount an USB-drive, so I unmount it
Code: umount /media/disk-1
3) Format USB-drive into ext3
[Code].....
