Software :: "Unable To Create Context Rendering" Error Whet Run OpenGL Application
Apr 4, 2010
I try to run Mesa gears example and I get following error:
Code:
freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives:
Code:
00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller])
Subsystem: VMware SVGA II Adapter
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 10d0 [size=16]
[code].....
View 1 Replies
ADVERTISEMENT
Apr 4, 2010
I try to run Mesa gears example and I get following error: Code: freeglut (./gears): Unable to create direct context rendering for window 'Gears'
This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity.
I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5
Relevant output of lspci -v gives: Code...
View 1 Replies
View Related
Jan 15, 2011
I have installed torcs (using sbopkg) and the dependencies plib, OpenAL, and freealut. On running it I get
Quote:
GLUT: Fatal Error in torcs-bin: failed to create OpenGL rendering context.
I am not sure if it is relevant but this is xorg.conf
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jul 28 19:48:57 PDT 2009
Section "ServerLayout"
[code]....
View 9 Replies
View Related
Dec 19, 2010
I installed XMBC and i keep getting this message "Error XBMC needs hardware accelerated OpenGL rendering. Install an appropirate graphic driver" i have a radeon 5750 hd graphics card. i updated the drive thru the website. but i keep getting this message.
View 4 Replies
View Related
Mar 27, 2010
I have openGL working fine on my system.The only problem is that when I try to run the executable file, nothing appears unless the full scene has been rendered.In fact, it appears in parts, i.e. updates after a second, then after another second etc...However, earlier, the rendering used to be continuous and I could see each pixel getting rendered in a continuous fashion.
View 3 Replies
View Related
Jun 8, 2011
Suddenly the application launcher (the one that pops out when pressing the green chameleon button) has changed and I no longer get the formerly so pretty application launcher. Instead I now get a simple context menu style drop down menu.
I first noticed this after I updated PackageKit. is there a way to get this back to the previous applicationn launcher. When adding just the applet (without the button) it still looks the same, just the button doesn't pop it out anymore, as it chose to pop out a grey drop down instead.
This is on OpenSuse 11.4 KDE 4.5 and the latest desktop kernel
View 2 Replies
View Related
Nov 22, 2010
I need to be able to open an openGL based piece of software remotely (like Maya or 3D Studio Max, for example). The server will be a linux machine (CentOS, currently, fwiw), but the client should be able to run on at least Linux and Windows. This will happen over the internet as opposed to over a LAN.
So far, I've tried
- "NoMachine NX" which is pretty good, but it seems to have some issues with GL. Maybe this can be fixed in xorg on the server (disabling overlays or something like that)? not sure.
- HP Remote Graphics Software (RGS) which works fairly well with Cent & Windows, though is sometimes a little slow. It also doesn't seem to be happy on Ubuntu, which is a pretty big bummer. It's also a bummer that it's somewhat expensive. That said, it's still the front-runner.
- VNC which was very slow.
It's imperative that it can transmit very complex rendered OpenGL properly. It's ok if it's slow to tumble/refresh, but it should be correct.
View 2 Replies
View Related
Jun 27, 2011
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
View 3 Replies
View Related
May 14, 2009
I ran "yum update" and updated my new installation. Afterwards: my main application stopped running. It iis an xwindow app. I am trying to run it from a terminal on the gnome desktop. How can I back out my updates and which packages should I try to remove?
Controller screen Buffer depth 1
void PSLr: :resize (int size): 661
QPixmap: Invalid pixmap parameters
auxillary display font size: 8
[code]....
View 1 Replies
View Related
Aug 24, 2010
I have been working with ssh for a long time without problems but suddenly, without any changes to the configuration, I am facing problems. When I try to login I get the following message and the connection is closed:
Code:
Unable to get valid context for tanwald
I ran SELinux in permissive mode and found the following logs:
[code]....
View 7 Replies
View Related
Mar 7, 2010
I downloaded an FLV video and placed an extra MP3 file over it. Two files. Total: 30 MBI experimented with about seven rendering containers, and QuickTime renderer was the only rendering container that didn't result in sped-up/compressed video or correct rendering for just fifteen seconds.How in the name of all that is holy did this rendering end up with 570 extra MB?
View 2 Replies
View Related
Jul 13, 2010
I looked for a little and everyone's problem similar to this it seems they are tunnelling for a vnc server of some sort. I am just running ssh and it fails not only from the machine, but also remotely. The username "lee" is in group "sshusers"I have two machines setup the same, as to my knowledge. In one server I can access ssh and everything works well but when I try to ssh into the other one it gives me this
Code:
[lee@localhost ~]$ ssh -p5912 192.168.1.63
lee@192.168.1.63's password:
[code]....
View 5 Replies
View Related
Sep 17, 2010
I'm trying to run a program called Alice 3.0. When I load the program, it crashes at the splash screen. I ran it in terminal, and this is the error message I received:
UNABLE TO LOAD OPENGL The most common reason for this is an incorrectly set Java library path. Please update your VM arguments. The text below has been copied to the clipboard for your convenience. Linux-i386
all properties
--- ----------
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>
[code]...
View 8 Replies
View Related
Jul 25, 2011
I just updated my system, not sure which package may have caused this, here are the outputs:
Mutter:
Code:
(mutter:4637): Clutter-CRITICAL **: Unable to initialize Clutter: Unable to select the newly created GLX context
Window manager error: Unable to initialize Clutter.
Compiz:
[Code]...
View 3 Replies
View Related
Oct 19, 2009
I just upgraded from FC8 (32-bit) to FC11 (64-bit). In doing so, I backed up my entire World of Warcraft folder so I could try to avoid having to download and install it all over again. However, I've now reinstalled wine (64-bit now), and the nvidia drivers from the rpmfusion repos (also 64-bit), and when I try to start WoW, it says it cannot load OpenGL. I'm wondering if anyone knows what's up, and if there's a solution that doesn't involve reinstalling WoW.
View 7 Replies
View Related
Jul 12, 2011
It is saying to make sure there is enough room in the tmp folder, so I cleaned out the entire tmp folder but the same error is still happening. Is there a way to make the tmp folder bigger? Or perhaps extract the temporary files to a different folder? Or maybe the size if the tmp folder is not even the problem?
View 1 Replies
View Related
May 21, 2009
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
View 1 Replies
View Related
Jan 14, 2011
I was trying to get a game to work (scorched 3d) but I kept getting a resolution error. So I did some looking around and found that I had to do something with xorg.conf in /usr/bin/x11 (if I remember). Well I didn't have that file, so I installed a program that had it (and for the life of me, I don't remember what it was). Long story short, I tried to run a different game (foobillard) and it wouldnt run. So I ran from terminal and got an error saying that x11 is not configured with opengl. Now I am mad cuz that was my favorite game. Is there a way to reset x11 and opengl without losing everything?
View 2 Replies
View Related
Jun 1, 2009
I've after an agonizing process of editing I finally finished my video that I was working on. Now it's time to render it, I want to render it to quicktime for linux so that I can encode to mpeg using mencoder as described in the cinelerra docs. Problem is , the movie won't render, it shuts down the process saying render error and that's it.
The docs say that quicktime requires these properties:
Audio option Two Complements 16bits (PCM)
Video option DV
but can't find any place that asks for anything like that setting.
View 1 Replies
View Related
Apr 3, 2010
I recently downloaded Frets On Fire and the HRP Polymer pack for Duke3D...Duke3D runs fine with just EDuke32 and no mods, just Duke3D and EDuke32. But when I try the HRP Polymer pack, it says in Terminal "NVIDIA: Direct Rendering failed, attempting indirect rendering." This is fine...if I want the game to lag like hell, I'm sure my video card and the driver for it support DR, the video card is a NVIDIA Geforce FX 5200, the same message appears in terminal when I run Frets On Fire, I think it does with other games too, if someone could explain how to enable Direct Rendering.
View 5 Replies
View Related
Apr 19, 2010
I try to install IPsec-Tools on Slackware 13, but I get an configure error: configure: error: Security Context requested, bu no selinux support! Aborting. I'm linux newbie and I'm following a slackware-basics tutorial, I did as in the tutorial, but the configure stops and aborts:
Code:
# CFLAGS="-O2 -march=i486 -mcpu=i686"
./configure --prefix=/usr
--sysconfdir=/etc
--localstatedir=/var
[Code]...
What can I do? How can I enable/install selinux support? I guess it's related with AH and ESP protocols, which in my kernel are defined as modules (m). If so, how can I enable them?
View 5 Replies
View Related
Feb 5, 2015
I have moved from MS directX to OpenGL on Linux Debian. My computer is running Jessie version with Gimp. I am trying to use several of the gl 4.0 functions but getting compiler error. I check for OpenGL version and appears to be version 1.5 .... How can I verify the correct openGL version and how can I upgrade to a moder version of at least 4.0?
View 4 Replies
View Related
Feb 18, 2011
I installed Matlab in Ubuntu 10.10. I was able to get it running and I saw the initializing screen. However it showed me an error with OpenGL
"warning : could not query OpenGL"
and it freezes there. I tried many things to get over with it and it didn't work.
View 2 Replies
View Related
Jul 22, 2011
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies
View Related
Jul 22, 2011
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
View 1 Replies
View Related
Mar 28, 2010
I want to ask if I can create application using Paskal, C++ or C# under Linux Ubuntu 9.10
View 2 Replies
View Related
Jul 31, 2010
I want to create a bigger application based on the linux.I know c language,mysql database and some of the networking concepts.
View 7 Replies
View Related
Apr 8, 2011
The script "vsftpd_virtualuser_add.sh" from the guide here:
http://wiki.centos.org/HowTos/Chroot_Vsftpd_with_non-system_users
executes the following line: /usr/bin/chcon -t public_content_rw_t $HOMEDIR/$USERNAME
which returns the error: /usr/bin/chcon: couldn't compute security context from unlabeled
Login attempts are unsuccessful on the given username.I followed the instructions on that page verbatim.I can't find anything useful on that error anywhere - even outside of vsftpd context.This is a new CentOS 5.5 server - updated everything with yum.VSFTP worked fine on the last server, which was a CentOS 5.x.
View 12 Replies
View Related
Jul 31, 2015
I installed debian 8.1, network install on a ThinkPad T60. When I right click the Desktop, I don't get "Create New -> link to application" and other links. In mint 17.1, I get a Menu with all links. I want to create a link to seamonkey with an icon on desktop.
View 3 Replies
View Related
Jun 13, 2011
how do I create a launcher for an application using DosBox? I tried in Alacarte, but it does not show up. I did this both as root and as user.Disregard. It did create the launchers. It just put them in "Other" even though I told it to create them in "Internet" so they are there, but just not where I want them. That is okay since now I can add them to my favorites and put them in the order I want.
I guess I will like Gnome 3 better as I find tweaks to make it work like I want it to work. Still though, it is not nearly as user friendly as my heavily tweaked Gnome 2 with Compiz.Another question though: How do I get it to select and use a photo I want for the background instead of the stock images? It is annoying as all get-out to have the screen turn to grey rather than stay the way I want it. :
View 5 Replies
View Related