CentOS 5 Networking :: Error: Unable To Create Socket - Permission Denied
May 21, 2009
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
View 1 Replies
ADVERTISEMENT
Apr 5, 2011
Code: # traceroute -I 69.12.32.2 Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied Note that the command was done as root. This worked in 11.3.
And yes, it works without the "-I". But it should work with the "-I". One shouldn't have to boot into Windows, just to run "tracert" there.
View 9 Replies
View Related
Sep 1, 2011
I have a droid phone, and I have ubuntu 9 running on it. This is done by chrooting since the phone runs a linux kernel. And it works... I have a question though. tightvncserver does work, and its able to listen on 127.0.0.1.. Its how you view your X session. So you chroot to Ubuntu, then start vncserver. Then switch back to android and login to ubuntu via vnc client. but apache, mysql, and postgresql do not work. Well. They dont seem too.. except for mysql. Mysql will start but only if you tell it not to use networking by saying skip-networking in my.cnf
Mysql says: mysqld cant create ip socket permission denied Apache2 says it can find 127.0.0.1 but doesnt actually run same with postgresql... All seem to be compiled with arm architecture. So why does tightvncwork? Why is it so special? How can it listen on the loop back (127.0.0.1) when nothing else can...
I have /proc and /dev bind to the chroot side. I can run ifconfig okay, and I can run /etc/init.d/networking start okay.. But apache2, mysql, etc have problems binding. I have removed apparmor even though technically its not running, but I removed it and its configuration files, just because I thought perhaps mysql looks at apparmor, but I doubted it.
View 1 Replies
View Related
Oct 17, 2010
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
View 3 Replies
View Related
Jan 7, 2010
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
View 5 Replies
View Related
May 3, 2011
In user mode [non-root] linux machine, tried to bind a socket by using a"ioctl(iInterfaceSocket, SIOCSIFADDR, &stCommand)". I am getting error 13 -> Permission denied because of user mode. If change from usermode to kernel mode everything works fine.I need to bind the socket in user mode only, please suggest solution for the abovewhile explaining the above,
View 2 Replies
View Related
Feb 25, 2011
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies
View Related
Aug 6, 2009
I'm using crontab for user ABC in a month and have no problem.. But today i want to add new schedule user ABC with crontab.. i found this error
/tmp/crontab.XXXXDYxb6a: Permission denied
so i check with crontab -l command, it can show my schedule.. If I use root, crontab -e and crontab -l work properly..
Note: ls -al /tmp
drwxr-xrwx 8 root root 4096 Aug 6 09:30 .
drwxr-xr-x 24 root root 4096 Jul 19 17:10 ..
drwxrwxrwt 2 root root 4096 Jul 19 17:20 .font-unix
View 1 Replies
View Related
Aug 11, 2009
I want to install Codendi softwr to my Centos 5.3.But can not execute the installation script gives an error permission denied./etc/fstab file does not contain a path that holds my CDROM drive.
View 2 Replies
View Related
Apr 3, 2011
I'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:
An error occurred: Permission Denied For more information, see the log file: c:...
View 8 Replies
View Related
Nov 22, 2010
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
View 2 Replies
View Related
Dec 22, 2010
I recently switched from Ubuntu Maverick 32-bit to 64-bit so I could compile Android's latest revision, Gingerbread.
Everything went pretty smoothly and I managed to fix most issues that was caused due to the switch.
But each time I open terminal, the following error shows up:
Code:
mkdir: cannot create directory `/mnt/cgroups/cpu': Permission denied
bash: /mnt/cgroups/cpu/19088/notify_on_release: No such file or directory
bash: /mnt/cgroups/cpu/19088/tasks: No such file or directory
I've tried manually creating that directory as root but the error remains.
View 2 Replies
View Related
Feb 8, 2011
I've just set up keys using
[Code]...
View 5 Replies
View Related
Aug 12, 2010
I've been tasked with transferring a Python web server from a Debian box to a Fedora server for work. (I think) I've been able to transfer all required files but I'm unable to run the web server because whenever I make the HTTPServer call in the python file I get an error "Cannot assign Requested Address".
I've basically traced the issue back to the server being unable to open a socket on the requested port (8085 in this case). I've checked netstat and there are no processes running on that port (or any other one I've tried for that matter) so wondering if there's a system configuration I need to do to allow programs to bind to sockets. Is there a deny configuration set up somewhere I need to modify? Does this even make sense?
View 1 Replies
View Related
Jan 18, 2010
I set security context for a folder as 702 to enable other users to create and delete folder contents.But whenever other users try to create a folder,its says "Permission denied".
View 11 Replies
View Related
Apr 22, 2011
I am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)
View 1 Replies
View Related
Oct 25, 2010
I am working on SUSE 9 Server in which I am trying to make folder transferdata under /opt folder but it is throwing an error mkdir: cannot create directory `transferdata': Permission denied
View 2 Replies
View Related
Jan 4, 2010
i can't get cyrus mailbox created. what i get is only error:
cm user.test.test
createmailbox: Permission denied
if i try user without "lastname":
cm user.test
createmailbox: System I/O error
here's maillog message:
Jan 4 13:08:09 pigeon imap[21695]: login: host.domain.com [127.0.0.1] cyrus plaintext User logged in
Jan 4 13:09:12 pigeon imap[21695]: IOERROR: creating directory /mail/imap: Permission denied
[code].....
View 2 Replies
View Related
Nov 9, 2010
I have a Acer Altos EasyStore NAS on which I have enabled an NFS share for a specific IP address. The EasyStore then shows me the NFS path as: Mount path: /nas/NASDisk-00004/media
When I try mounting the share from the machine at the allowed IP address it appears to mount OK, but when I try to view the directory using 'ls' I get 'ls: cannot open directory /nfs: Permission Denied'. the /nfs folder where I'm trying to mount the NFS share shows up in ls as belonging to a group called 11587 (everything else is shown as root). I have no control over the group ID on the NAS as it's just an appliance. How can I gain access to the shared folders?
View 1 Replies
View Related
Aug 3, 2010
I am having problems accessing my work desktop through my home computer running Fedora 13. I am able to remote into work through MAC and Windows XP. I loaded vpnc and was able to connect to the concentrator. I also able to ping it too. I cannot connect to my desktop using rdesktop. I get error message �Unable to connect, socket is unavailable. I cannot ping to the desktop.
View 2 Replies
View Related
Jan 7, 2011
An uncaught exception was raised: [Errno 13] Permission denied: '/media/e6f6ac46-4bfc-487b-9c81-aab706ead9e3/boot'
The above is the error message I get when I try to create an usb-flash boot drive. I downloaded the iso for Mint10 and use the "create startup disk" program to create the boot drive. I can see both the iso and the flash drive within the program, but when I click on "create disk" I get the above error message?
View 7 Replies
View Related
Aug 27, 2010
I'm using my AntiX M8 Live CD to repair a hosed Windows installation, I downloaded ComboFix to ~/home/Desktop and now I'm trying to copy (cp) the file to /mnt/ where I have already mounted the NTFS Windows partition. NTFS3G is integrated into AntiX, right? So why am I having permissions errors?
Code:
mepis1:/home/demo# cp -v Desktop/ComboFix.exe /mnt/SwSetup/
`Desktop/ComboFix.exe' -> `/mnt/SwSetup/ComboFix.exe'
cp: cannot create regular file `/mnt/SwSetup/ComboFix.exe': Permission denied
mepis1:/home/demo# So far, I can read it without any errors in Terminal and navigate through the whole filesystem in ROX-Filer, Do I need to edit /etc/fstab to be able to write to an ntfs drive?
View 6 Replies
View Related
Dec 16, 2010
i installed Slackware 13.1 64 bits in a asus laptop and until now everything is running ok. But when i tried to mount a usb pendrive, i just can mount it as root;well, i thought there would be no problem, i will change permissions with chmod and everyone could access, read and write on it the command :
mount -t ntfs /dev/sdb1 /mnt/kingston
and making ls -l the result is :
drwx------ 1 root root 12288 Dec 8 17:20 kingston
so next i wrote (as root):
chmod 777 -R kingston
and the message was "Operation not supported" i tried also changing the ownership permission :
chown molei:users /kingston
drwxrwxrwx 1 molei users 12288 Dec 8 17:20 kingston
so, apparently i would have total access to the kingston directory; the problem is when i try to copy something to the kingston dir, an error msg. appears :
cp: cannot create regular file `/mnt/kingston/linux_guide.pdf': Permission denied
View 2 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
Jan 2, 2009
I'm trying to run a backup using CPIO to an LTO2 tape in an HP Ultrium 460 drive using the following:find / -path /proc -prune -o -print | cpio -o -H crc --block-size=128 > /dev/st0Each time I get the error:-bash: /dev/st0: Permission deniedThis is regardless of whether I sudo the two sides of the command or not. I have used dd if=/dev/st0 of=/tmp/test.file ibs=128k count=1 to verify the blocksize (and since I was a little confused about block-size in cpio I also tried --block-size=256)
View 5 Replies
View Related
Feb 12, 2010
I'm trying to run Interhack (spoiled variant of Nethack) for local game. Is looking through settings I saw that:
[Code]....
When I try to start it with ih_server option it gives me that error: Code: Can't access() script Could not create socket: Connection refused I think my problem is closed port: Code: nc localhost 9999 localhost [127.0.0.1] 9999 (?) : Connection refused How do I fix this?
View 2 Replies
View Related
Dec 7, 2010
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
View 3 Replies
View Related
Feb 3, 2010
I'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.
So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?
View 3 Replies
View Related
Apr 21, 2011
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
View 6 Replies
View Related
Jun 6, 2011
I installed samba em my opensusse and i have fallows error: Unable to setup corepath for smbd: Permission denied
View 1 Replies
View Related