OpenSUSE Install :: Mednafen - Configure: Error: *** OpenGL Header File Not Found
Jul 22, 2011
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
View 1 Replies
ADVERTISEMENT
Jul 28, 2015
I have some serious input lag (using gamepad through USB) when using mednafen together with opengl. I am using a ATI HD3000, (built in to motherboard) and debian jessie together with FOSS drivers. If I use overlay instead, the input lag is acceptable, but not as good as it could be. I've tried all the things in the [URL]... mednafen documentation[/url] like turning off vsync, filters and whatnot but it doesn't really make any difference. There is also something about turning off "flip queue size" and Triple buffering but I have not found any way to change these settings for the FOSS driver.
I can use the overlay, but I would prefer to lower the input lag even further and use the opengl driver. I understand that there will always be *some* input lag on a HDTV but why is opengl so slow for me?
View 0 Replies
View Related
Sep 18, 2010
I have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
View 9 Replies
View Related
Oct 8, 2010
I managed to get following config up and running very nicely with an 11.3 installation. But recently I did a clean install of the OS and hoping to preserve my data in the home HD (2TB) partition I did the following operation which resulted in black screen screen with error 15: file not found.
Config: one SSD root (90GB) and swap (30Gb) second HD for home (2TB)
During the installation I reformatted and mounted the SSD with root and swap as above. I left the home HD (2TB) unformatted and mounted as home.
When I did my first boot up, it worked perfectly - Even Fire Fox booted up with my recovered pages as of my last install! However after installing my multi-media codecs, and security updates, etc. to the fresh install I rebooted the system only to discover that I am unable to get past GRUB!
I don't have to lose my data every time I do a fresh install to new ISO release.
View 9 Replies
View Related
Jul 1, 2010
I have it running on my system (version 11.1.1) and i have installed only the kernel. i want to install several packages but i can't. yast2 -i bison-devel but i get this error:Error Download failed: File '/content' not found on medium [URL]...
View 6 Replies
View Related
Sep 10, 2009
Getting back my OpenSuse OS/partition.
Background: I had a dual boot system, Win XP followed by OpenSuse 11.1 install. I tweaked it a lot to get my wireless card and Nividia card working. Finally got it to a stage where it was working great.
What happened: For some reasons windows XP had some issues and I had to reinstall the OS. Since I have the openSuse install DVD lying around I took the bold step of reinstalling windows knowing that it will blow away the Grub from MBR. However, during the windows setup, the setup said something about setting the Linux partition as inactive (I think so). Unfortunately, I don't remember the exact message.
After finishing the XP install, I booted in with the XP Cd and tried the repair option to repair the MBR. That really messed up the MBR. So much so that booting back with XP boot CD and running fixmbr didn't work. Finally reinstalled windows again.
Now I am not sure what should I do next.
I tried using the superGrubDisk but it gives the following error: Error 15 File not found.
View 7 Replies
View Related
Apr 25, 2010
this morning the updater applet shows me this error and i dont know what to do this error says
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/home:/gryffus/openSUSE_11.2+KDE43'
View 1 Replies
View Related
Sep 23, 2010
Just today I have started to repeatedly get an error popup: File '/repodata/repomd/xml' not found on medium [URL] I have not done any updates nor modified the OS in anyway in the last two weeks.
View 2 Replies
View Related
Oct 22, 2010
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
View 9 Replies
View Related
Apr 17, 2011
Give me error when I install softflowd
the problem :
#./configure
give me :
configure error : no BPF header not found
View 4 Replies
View Related
Dec 2, 2010
i have on my server SUSE Enterprise 11 SP1 installed. When i try to install an rpm it displays this error:
warning: fftw3-3.1.2-113.1.src.rpm: Header V3 DSA signature: NOKEY, key ID
>943d8bb8
> 1:fftw3 ###########################################
[code]....
View 7 Replies
View Related
Feb 21, 2010
I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
View 8 Replies
View Related
Jun 29, 2010
I need to install VMWare Workstation on Fedora 13, but I keep running into the following error -
"C header files matching your running kernel were not found...."
It's looking for 2.6.33.3-85.fc13.i686 but when I did a - yum install kernel-devel I got 2.6.33.5-124.fc13.i686
when I do - yum install kernel-devel `uname -r`
I get the following -
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package kernel-devel-2.6.33.5-124.fc13.i686 already installed and latest version
[code]....
View 5 Replies
View Related
Apr 22, 2011
where can i get socket.h header file? will copy pasting this header file in 'incl' directory allow me to use it in the my program?
View 1 Replies
View Related
Apr 30, 2010
I ran a full package upgrade and then a distribution upgrade yesterday on a Suse 10 system to bring it up to date. I think it worked out fine, except the boot loader (Grub) reports error 15: file not found on attempted boot.
In the other example, the boot loader was configured to look for the now non-existent kernel and i imagine mine is doing the same: the last example was fixed with a live disc that i dont have any more, and i cant make one because i dont have access to a dvd burner.
My question is this: how do I find what version of the kernel I'm using, and how do I configure the Grub boot loader so it'll work as desired? I've been trying every possible option for hours and hours and I really can't afford to lose my information on there.
View 5 Replies
View Related
Oct 19, 2009
I have just done a reinstall of Centos 5.3 on a dedicated server (via a KVM). My partition arrangement was the default presented to me by the installer:
As you can see, I'm using LVM for everything other than /boot (I need to use LVM for an app I am testing).
On reboot, I get the following:
[QUOTE]
It looks like it can't find vmlinuz-2.6.18-128.el5 in /boot.
I have rebooted using the Centos Install Disk 1 and gone in to rescue mode. Rescue mode mounted my / under /mnt/sysimage, from there I could see that /boot had been mounted from /dev/sda1 as it should be.
However, there was no initrd.image or /vmlinuz-2.6.18-128.el5 under /boot or /boot/grub. Shouldn't the CentOS installer have created these?
Is there anyway I can recover this installation?
View 1 Replies
View Related
Dec 3, 2010
I've just checked my apache error log and it's filled with this:
Code:
[error] [client 127.0.0.1] File does not exist: /srv/www/htdocs/announce
Every 8 minutes or so.
I'm running rTorrent as daemon on same machine, and I suspect it's trying to access something like http://localhost/announce. But that's just my guess, is it some misconfiguration of rTorrent, and how do I fix that? Or should I just ignore all those errors.
View 3 Replies
View Related
May 19, 2011
FYI - Bug Team: I have had this issue all day today:
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/home:/dmitry_serpokryl:/Enlightenment-cvs-core-metapackage/openSUSE_11.2/'
View 6 Replies
View Related
Nov 16, 2010
Decided I'd like to take a look at OpenSUSE and installed onto my desktop. Already successfully dual booting Ubuntu 10.10 and Windows XP (which I keep purely for iTunes). When I start the PC the Ubuntu grub menu showing Ubuntu and Windows options has been replaced by a Suse-branded screen showing something that looks (to my untrained eye) like a grub menu. Ubuntu and Suse are listed. If I select Ubuntu I am shown a dos screen with "Error 15: file not found". I am then taken to the old Ubuntu grub screen but trying to boot Ubuntu from that menu returns the same error. I know all the data is still there - I can mount the drive in Suse and view all my documents.
I have searched the forums and tried to follow some of the instructions given in response to similar threads but I'm afraid I didn't get very far. Please assume that I have NO PRIOR KNOWLEDGE of Linux! I really know nothing about it and am only just getting to grips with basic terminal commands. Goodness knows why I thought OpenSUSE would be a good idea... I found instructions for running Boot Info Script and these are the results:
[Code].....
View 1 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Sep 13, 2011
I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
View 3 Replies
View Related
Jun 11, 2011
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies
View Related
Jan 11, 2011
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
View 9 Replies
View Related
Feb 1, 2011
I have downloaded yersinia-0.7.1 and trying to install it. When i run ./configure it gives me following error
,more than one set found in:
/usr/include
/usr/include/pcap
View 2 Replies
View Related
May 15, 2010
I'm using Ubuntu 9.10 'Karmic Koala' and when trying to install from source any program using C++, in this example kpictorial, I get this:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
[Code].....
I have qt3, qt4, the -dev packages and the headers and libraries installed. I have just about everything you can have for qt installed trying to fix this. The qt files are under /usr/include and the source code files are under /usr/src.
View 2 Replies
View Related
Apr 23, 2010
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
View 5 Replies
View Related
Mar 11, 2011
Compiling Amarok from git gives error "gdk-pixbuf/gdk-pixbuf.h: No such file or directory" it is installed in /usr/include/gtk-2.0/gdk.I just up'ed to openSuse 11.4 and KDE 4.6.1 - compiled fine last time I tried which was probably last weekend or so (March 2nd or third)Wondering if /usr/include/gtk-2.0/ is new in 11.4 because of the upcoming gtk3.0 and the problem is it's not some path and not being compiling proficient I'm a bit lost.full error
Code:
/home/smiley/MyTemp/amarok/src/core-impl/collections/ipodcollection/handler/IpodHandler.cpp:35:35: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
[code]....
View 1 Replies
View Related
Aug 19, 2010
Since there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
View 9 Replies
View Related
Sep 24, 2009
I'm trying to install ffmpeg however I always get an error when I run ./configure. I know xvid is compelled into the dir below, this is the output from the xvid make install.
make install
D: /usr/local/lib
I: /usr/local/lib/libxvidcore.so.4.2
I: /usr/local/lib/libxvidcore.a
D: /usr/local/include
I: /usr/local/include/xvid.h
Then from the ffmpeg directory I run
./configure --prefix=/usr --libdir=/usr/local --enable-libmp3lame --enable-libxvid --enable-gpl --enable-shared
ERROR: libxvid not found
View 9 Replies
View Related
Feb 18, 2011
How to fix this error :
Code:
checking for Qt4... no
configure: error: The QtCore library >= 4.3.0 could not be found.
View 3 Replies
View Related
