I'm getting 'Network Error' in Empathy on my MSN accounts. This is an old issue but the answer I always knew (just killall telepathy-butterfly and restart Empathy) isn't working.There is no process telepathy-butterfly.
View 2 RepliesI get error when I try to login my yahoo account. It seems okay with Gtalk, I havent checked the others because I use yahoo for most of time. It blows out network error no matter how i try: killall tempathy-butterfly (it's probably not running on my system, I've tried with killall telepathy-haze,salut which are running and having relative with telepathy ), edit host file, change the server name by adding cn before it. But it's still no go up to now.
My alternatives are meebo or wine and trillian, worked, but is there any chance for Empathy or Pidgin (it gives me error: connection refused)? It's just happened for 3-4 days recently, i dont know whether my network has configured right or not. Hope someone give me a hand which should embarrass me to continue living in linux bug world.
I am using a wired connection ( ethernet cable ) and everything works just fine except Empathy.
View 3 Replies View RelatedI am trying to connect to empathy, but whenever I log in, under my name is says "network error". My internet connection is working fine, and I have full bars.
View 2 Replies View RelatedI'm having a little problem with the Empathy IM.
Everytime I want to connect with the ICQ network, Empathy tells me that there exists a network error:
First of all i've tried to disable the SSL function with
Code:
And i've tried also
Code:
Error: Invalid update command.
Usage:
I'm trying to connect to freenode using my Empathy but it always gives me network error (on chat.freenode.net and irc.freenode.net). The steps I took were the simplest ones: Edit > Accounts Add...Protocol: IRC Network: FreeNode Nickname: pedrosanta Real Name: Pedro Santa Start session This is very, very strange. Anyone got this too? Can you shed me some light on what's happening or how can figure that out? FYI, I'm using the Portuguese version.
View 2 Replies View RelatedI am trying to setup empathy to use yahoo im. I have searched and searched and apparently I cannot find a resolution. Does this work for anyone? Is there another IM option that will? I can connect to msn without error, but for yahoo account, i just get a network error.
View 6 Replies View RelatedOK So pidgin seems wonko at the moment so I tried to switch to Empathy.
When I try to login with both of my MSN accounts I get "no error specified" underneath a disconnected plug.
what this means or how to get MSN accounts working with Empathy?!
I recently wanted to build Empathy 2.31 from a source tarball (after having installed all the dependencies listed on the Empathy website).I got the following error while launching ./autogen.sh:
Code:configure: error: glib-compile-schemas not found.After some googling to try to fix this problem, I've found a thread on these forums. It was saying install libglib2.0-dev an then install (or remove) gnome-shell.I tried every solution I've found but nothing works, still got the error.Does anyone here succeded in compiling Empathy from source please?
Code:
# yum update
Loaded plugins: presto, refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package evolution.i686 0:2.30.2-1.fc13 set to be updated
--> Processing Dependency: libedataserver-1.2.so.11 for package: nautilus-sendto-2.28.4-1.fc13.i686
[Code]...
Error: Package: empathy-2.30.1.1-1.fc13.i686 (@updates) Requires: libedataserver-1.2.so.11
Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: gnome-panel-2.30.0-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: nautilus-sendto-2.28.4-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
Anyone recompiled Empathy on Fedora? I have problem of configure and make as following:
checking for LIBEMPATHY... configure: error: Package requirements (
glib-2.0 >= 2.16.0
gobject-2.0
gio-2.0 >= 2.16.0
gio-unix-2.0 >= 2.16.0
libxml-2.0
telepathy-glib >= 0.7.31
libmissioncontrol >= 4.61
telepathy-farsight
farsight2-0.10
gstreamer-0.10
) were not met:
No package 'telepathy-glib' found
No package 'libmissioncontrol' found
No package 'telepathy-farsight' found
No package 'farsight2-0.10' found
No package 'gstreamer-0.10' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBEMPATHY_CFLAGS and LIBEMPATHY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
Code:
E: empathy-common: subprocess installed post-installation script returned error exit status 2
E: empathy: dependency problems - leaving unconfigured
E: nautilus-sendto-empathy: dependency problems - leaving unconfigured
I recently purchased a Dell Vostro v130 which came with Win 7 pre-loaded. I've been using it for a few weeks with no problems, but now I'd like to install ubuntu studio. I made it through the the partitioning part but now I'm getting a networking error: "Network autoconfiguration failed. Your network is probably not using the DHCP protocol. Alternatively, the DHCP server may be slow or some network hardware is not working properly."
I've been using the wireless connection in win 7 without any problem so I don't know why I'm having a problem now.
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedI'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error. In the Putty , i configured: IP : IP address of computer Ubuntu. Port 22 Connection Type SSH This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I already checked computer with ubuntu : /etc/ssh/sshd_config: in this file port 22, PermitRootLogin yes.
And in this machine installed with openssh-server, and openssh-client. But in this time, this error is maintaining, i don't find idea to fix this error.
Ive recently switched over to AT&T Uverse TV/Internet service and I've noticed that when I ssh into my linux( 2.6.18-194.3.1.el5xen CentOS) server I get disconnected. When I'm using putty it gives the "network error software caused connection abort" error. When I'm at work using one of our jump servers and ssh'ing from the command line it will freeze up from time to time but never disconnects. I think the problem is either with the OS or the new AT&T modem. At first I had my CentOS server using DHCP and it would disconnect within a few minutes after I ssh'ed. I switched over to a static IP and now it goes about 10 minutes before it disconnects. It doesnt matter if I'm actively typing or not, so it's not an inactivity issue. I have the firewall turned off on my laptop, and since the issue happens on multiple devices, including my iphone I dont think thats the issue.
I have iptables and selinux turned off/disabled so thats not it. In putty I have enabled Keep Alive(30 seconds) and it still disconnects. I opened the port on the modem to allow ssh for the IP of the linux server. Ive also recently reinstalled this server with CentOS so I can't compare with the previous internet provider as I didn't reinstall until after I switched over. BUT previous installs with CentOS 5.2 worked fine with the previous ISP. AT&T Modem is a 2wire 3800HGV-B
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedYou can find this bug here: [URL]and here: [URL]
Sometimes Empathy is not sending my messages to my contacts on MSN. There are no warning messages of this, so it's really annoying. I have to disconnect and reconnect to MSN to resolve the issue. After the bug occurs no message is sent to that contact, but I can communicate with others.
In my case I see no correlation between the length of the message and the bug occurring, it seems to appear randomly.
I am using Empathy 2.30.0.1 on Ubunutu 10.04 RC
i've never been able to use empathy.for some reason, i just can't add accounts.i've messed with it a lot in karmic, but gave up. running lucid now and added a profile for my wife. interestingly, she has no problems using empathy so i think there must be something going on with my settings.i've searched and searched and removed everything i could find that was empathy-related, but no luck.
View 3 Replies View RelatedI noticed today after applying all update I get Network error when trying to connect to MSN with empathy. Any one else having this problem and what can I do to resolve this.I am running ubuntu 10.4.
View 7 Replies View RelatedI just recently installed Ubuntu 10.04 and I am trying to connect to IRC (freenode) using Empathy. When I try to add a new account, IRC does not show up in the list of "kind of chat account". I'll attach a screenshot of what I see. I have the telepathy-idle package installed.
View 7 Replies View Relatedhow can i run Empathy from my terminal?
View 1 Replies View RelatedTo get sip support in empathy you have to run.
Code:
sudo apt-get install telepathy-sofiasip
But i could not get my account to work.
I already have a ekiga.net account working in Ekiga. So i know my account is correct.
I've been trying to stomach Empathy's emoticons for a while now but I don't think I can take them anymore; I just find them #*^$@-n' creepy. As far as I can tell, there isn't a slick way to customize this, but does anyone know where to go under the hood in this program?
View 6 Replies View RelatedI'm having problems with the Empathy MSN on Ubuntu 10.10.I have searched the web but haven't found anything particular about this.I'm trying to log in but it stays on "Connecting" forever, doesn't go anywhere else.But it's still logging in, how do I know that?When I'm on msn on my other computer (which runs W7) and I try to log in into Empathy, I get signed out from my W7 MSN. This happens because I happen to log in from another place. In this case, that means that Empathy is logging me in, but it's still stucks on "Connection".
View 2 Replies View RelatedI'm using 9.10 on a laptop as a server - it is not currently connected to a router/clients
I have installed a Jabber server and created a new account online but when I try to connect using Empathy I get a "Network Error" message
I'm presuming I have to point it at my server somehow but I'm completely lost as to how