Fedora :: Empathy Recompile - Configure Error (No Package Found)
Aug 28, 2010
Anyone recompiled Empathy on Fedora? I have problem of configure and make as following:
checking for LIBEMPATHY... configure: error: Package requirements (
glib-2.0 >= 2.16.0
gobject-2.0
gio-2.0 >= 2.16.0
gio-unix-2.0 >= 2.16.0
libxml-2.0
telepathy-glib >= 0.7.31
libmissioncontrol >= 4.61
telepathy-farsight
farsight2-0.10
gstreamer-0.10
) were not met:
No package 'telepathy-glib' found
No package 'libmissioncontrol' found
No package 'telepathy-farsight' found
No package 'farsight2-0.10' found
No package 'gstreamer-0.10' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBEMPATHY_CFLAGS and LIBEMPATHY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
View 14 Replies
ADVERTISEMENT
Dec 11, 2009
I am trying to install kcachegrind and during the ./configure phase I got the following error:
Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following:
./configure --with-qt-includes=/usr/lib64/qt4/include
but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
So what should I do... for you info I am listing below the output of:
yum list *-devel | grep -i qt
qt-devel.x86_64 1:4.5.3-9.fc10 @updates
qwtplot3d-qt4-devel.x86_64 0.2.7-6.fc9 @fedora
PackageKit-qt-devel.i386 0.3.16-1.fc10 updates
PackageKit-qt-devel.x86_64 0.3.16-1.fc10 updates
PyQt-devel.i386 3.18.1-5.fc10 updates
PyQt-devel.x86_64 3.18.1-5.fc10 updates
PyQt4-devel.i386 4.6.2-3.fc10 updates
PyQt4-devel.x86_64 4.6.2-3.fc10 updates
QtRuby-devel.i386 4.3.3-4.fc10 updates
QtRuby-devel.x86_64 4.3.3-4.fc10 updates
SoQt-devel.i386 1.4.1-9.fc9 fedora
SoQt-devel.x86_64 1.4.1-9.fc9 fedora
avahi-qt3-devel.i386 0.6.22-12.fc10 updates
avahi-qt3-devel.x86_64 0.6.22-12.fc10 updates
avahi-qt4-devel.i386 0.6.22-12.fc10 updates
avahi-qt4-devel.x86_64 0.6.22-12.fc10 updates
dbus-qt-devel.i386 0.70-4.fc9 fedora
dbus-qt-devel.x86_64 0.70-4.fc9 fedora
dbus-qt3-devel.i386 0.9-1.fc10 fedora
dbus-qt3-devel.x86_64 0.9-1.fc10 fedora
libprojectM-qt-devel.i386 1.2.0-3.fc10 updates
libprojectM-qt-devel.x86_64 1.2.0-3.fc10 updates
php-qt-devel.i386 4.3.3-4.fc10 updates
php-qt-devel.x86_64 4.3.3-4.fc10 updates
polkit-qt-devel.i386 0.9.2-1.fc10 updates
polkit-qt-devel.x86_64 0.9.2-1.fc10 updates
poppler-qt-devel.i386 0.8.7-7.fc10 updates
poppler-qt-devel.x86_64 0.8.7-7.fc10 updates
poppler-qt4-devel.i386 0.8.7-7.fc10 updates
poppler-qt4-devel.x86_64 0.8.7-7.fc10 updates
qt-devel.i386 1:4.5.3-9.fc10 updates
qt-qsa-devel.i386 1.1.5-5.fc9 fedora
qt-qsa-devel.x86_64 1.1.5-5.fc9 fedora
qt3-devel.i386 3.3.8b-17.fc10 fedora
qt3-devel.x86_64 3.3.8b-17.fc10 fedora
qwtplot3d-qt4-devel.i386 0.2.7-6.fc9 fedora
zbar-qt-devel.i386 0.8-5.fc10 updates
zbar-qt-devel.x86_64 0.8-5.fc10 updates
View 4 Replies
View Related
Jun 25, 2010
Code:
# yum update
Loaded plugins: presto, refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package evolution.i686 0:2.30.2-1.fc13 set to be updated
--> Processing Dependency: libedataserver-1.2.so.11 for package: nautilus-sendto-2.28.4-1.fc13.i686
[Code]...
Error: Package: empathy-2.30.1.1-1.fc13.i686 (@updates) Requires: libedataserver-1.2.so.11
Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: gnome-panel-2.30.0-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: nautilus-sendto-2.28.4-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
View 9 Replies
View Related
Mar 2, 2010
I want to install the Empathy on my CentOS. And I configured, then I got a resposes:
checking gnome-doc-utils >= 0.17.3... no
configure: error: gnome-doc-utils >= 0.17.3 not found
But when I run "yum install gnome-doc-utils"
The system respond:
[root@localhost ~]# yum install gnome-doc-utils
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Package gnome-doc-utils-0.8.0-2.fc6.noarch already installed and latest version
Nothing to do
View 9 Replies
View Related
Sep 24, 2009
I'm trying to install ffmpeg however I always get an error when I run ./configure. I know xvid is compelled into the dir below, this is the output from the xvid make install.
make install
D: /usr/local/lib
I: /usr/local/lib/libxvidcore.so.4.2
I: /usr/local/lib/libxvidcore.a
D: /usr/local/include
I: /usr/local/include/xvid.h
Then from the ffmpeg directory I run
./configure --prefix=/usr --libdir=/usr/local --enable-libmp3lame --enable-libxvid --enable-gpl --enable-shared
ERROR: libxvid not found
View 9 Replies
View Related
May 31, 2011
When I try to rpm --resign a package I get file not found error. Its not misstyping its not doing any gpg stuff and it does not ask for passphrase.I then rpmbuild -ba --sign X.specIt makes all the files and dies right where it signs the filesWhy i know its the .rpmmacros it never asks for a passphrase!If I build without --sign it builds 100% and exits normally.
.rpmmacros
%_signature gpg
%_gpg_name myname <myemail>
[code]....
View 4 Replies
View Related
Jul 6, 2011
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
View 1 Replies
View Related
May 24, 2010
Today I was using Gchempaint (part of Gnome Chemistry Tools) and found that the F12 version fails miserably to correctly export H to xyz. So I decided to install the latest version I found (0.11). There are, however, some problems I must sort out during compilation.
Apparently it does not see my 'cairo' installation and so I get the following error message:
Code:
checking for cairo... configure: error: Package requirements (cairo >= 1.6.0) were not met: No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.Alternatively, you may set the environment variables cairo_CFLAGS and cairo_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
View 2 Replies
View Related
Aug 2, 2010
m using fedora 13 gnome while installing glib m getting error
configure: error: *** Working zlib library and headers not found ***
View 3 Replies
View Related
Jan 22, 2011
Fedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
View 2 Replies
View Related
Feb 1, 2011
I have downloaded yersinia-0.7.1 and trying to install it. When i run ./configure it gives me following error
,more than one set found in:
/usr/include
/usr/include/pcap
View 2 Replies
View Related
May 15, 2010
I'm using Ubuntu 9.10 'Karmic Koala' and when trying to install from source any program using C++, in this example kpictorial, I get this:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
[Code].....
I have qt3, qt4, the -dev packages and the headers and libraries installed. I have just about everything you can have for qt installed trying to fix this. The qt files are under /usr/include and the source code files are under /usr/src.
View 2 Replies
View Related
Dec 6, 2010
I'm trying to compile mesa from git sources, and I get this error:
Code:
checking for LIBDRM_RADEON... no
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking for XML_ParserCreate in -lexpat... yes
checking for INTEL... no
configure: error: Package requirements (libdrm_intel >= 2.4.21) were not met:
No package 'libdrm_intel' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables INTEL_CFLAGS
and INTEL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details I have an nvidia card, and had only built the nouveau drivers in libdrm-git. Now it seems mesa has an added requirement for the intel drivers. Also, mesa-git git ignores many compile options that I pass to it.
View 5 Replies
View Related
Feb 18, 2011
How to fix this error :
Code:
checking for Qt4... no
configure: error: The QtCore library >= 4.3.0 could not be found.
View 3 Replies
View Related
May 8, 2010
configure: error: readline library not found If you have readline already installed, see config.log for details on the failure. It is possible the compiler isn't looking in the proper directory. Use --without-readline to disable readline support. Now I tried to yum install readline-devel and the result was failure as below:
Quote:
[root@localhost ~]# yum install readline-devel-6.0-3.fc12.i686.rpm
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[code]....
So I am thinking that maybe I have to tell configure where my readline libraries are. From the above, it looks like readline-6.0 is not on my computer, even though I went through the configure/build/install process for it.
View 3 Replies
View Related
Jan 24, 2010
I have had problems trying to use ./configure when compiling fvwm95. I get a error that says this
Code:
checking for cc... no
configure: error: no acceptable cc found in $PATH
View 1 Replies
View Related
Feb 21, 2010
i was installing php5.3 on my system nd i followed d procedure
./install after processing man lines it said checking for xml2-config path... configure: error: xml2-config not found. Please check your libxml2 installation.
[Code]...
View 2 Replies
View Related
Feb 21, 2010
I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
View 8 Replies
View Related
Jun 10, 2011
I installed ubuntu server and got it set up, and im trying to install shorewall as a firewall, but whenever i do sudo apt-get install shorewall i get a package not found error.
View 5 Replies
View Related
Jul 22, 2011
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
View 1 Replies
View Related
Jun 14, 2011
I'm having a little problem with the Empathy IM.
Everytime I want to connect with the ICQ network, Empathy tells me that there exists a network error:
First of all i've tried to disable the SSL function with
Code:
And i've tried also
Code:
Error: Invalid update command.
Usage:
View 2 Replies
View Related
Apr 14, 2010
I am trying to setup empathy to use yahoo im. I have searched and searched and apparently I cannot find a resolution. Does this work for anyone? Is there another IM option that will? I can connect to msn without error, but for yahoo account, i just get a network error.
View 6 Replies
View Related
Jan 7, 2011
I am trying to install wine in ubuntu 8.04. While installation getting the error 'No suitable package flex found'. I tried to find out flex package in adobe as well as other sites. unable to find out.
View 3 Replies
View Related
Jun 4, 2011
using squeeze and trying to install asterisk on it. after entering the ./configure command this error appears configure: error: *** termcap support not found (on modern systems, this typically means the ncurses development package is missing) i've tried to find the soultion in google, but i couldn't.
View 1 Replies
View Related
Oct 5, 2009
Is there a way to use configure options with yum for packages? For example, i've got a lamp setup, and right now (after installing F11) i got a msqli class not found error, which means that it is not loaded into php. I see that it can be reconfigured with certain options, but i yummed it, and i'd like to keep it that way. I tried a yum reinstall, but it didn't work.
View 1 Replies
View Related
Feb 20, 2011
I am installing GTK+ 3.0 from the source tarball... and i get this error...
configure: error: *** libX11 not found. Check 'config.log' for more details.
this doesn't make sense because I am on X11 right now and I have libx11-dev
View 2 Replies
View Related
Jun 23, 2009
I'm trying to install ndiswrapper in Fedora 10, but the package is not found:
[Code]...
View 1 Replies
View Related
Jul 12, 2010
i ve been trying to compile rtorrent from source and while configuring i run to this: Code: checking for OPENSSL. configure: error: Package requirements (openssl) were not met: No package 'openssl' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENSSL_CFLAGS and OPENSSL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. i tried to install openssl and than i came up to this:
[Code]....
View 3 Replies
View Related
Jul 26, 2011
I want to compile program. "./configure" giving :
Code:
[kuba@Kuba-fedora uget-1.8.0]$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executable .....
Configure: error: Package requirements (libnotify) were not met:
No package 'libnotify' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS
and LIBNOTIFY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. But I have the newest version of libnotify.
View 2 Replies
View Related
Jun 20, 2010
I am facing problems when trying to install gtk+, I have downloaded all the required libraries, but the following output?
checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.21.3 atk >= 1.13.0 pango >= 1.20 cairo >= 1.6) were not met:
Requested 'glib-2.0 >= 2.21.3' but version of GLib is 2.12.3
No package 'atk' found
No package 'pango' found
No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. you may set the environment variables BASE_DEPENDENCIES_CFLAGS and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
View 6 Replies
View Related
