I recently wanted to build Empathy 2.31 from a source tarball (after having installed all the dependencies listed on the Empathy website).I got the following error while launching ./autogen.sh:
Code:configure: error: glib-compile-schemas not found.After some googling to try to fix this problem, I've found a thread on these forums. It was saying install libglib2.0-dev an then install (or remove) gnome-shell.I tried every solution I've found but nothing works, still got the error.Does anyone here succeded in compiling Empathy from source please?
I get error when I try to login my yahoo account. It seems okay with Gtalk, I havent checked the others because I use yahoo for most of time. It blows out network error no matter how i try: killall tempathy-butterfly (it's probably not running on my system, I've tried with killall telepathy-haze,salut which are running and having relative with telepathy ), edit host file, change the server name by adding cn before it. But it's still no go up to now.
My alternatives are meebo or wine and trillian, worked, but is there any chance for Empathy or Pidgin (it gives me error: connection refused)? It's just happened for 3-4 days recently, i dont know whether my network has configured right or not. Hope someone give me a hand which should embarrass me to continue living in linux bug world.
I'm getting 'Network Error' in Empathy on my MSN accounts. This is an old issue but the answer I always knew (just killall telepathy-butterfly and restart Empathy) isn't working.There is no process telepathy-butterfly.
I am trying to connect to empathy, but whenever I log in, under my name is says "network error". My internet connection is working fine, and I have full bars.
I'm trying to connect to freenode using my Empathy but it always gives me network error (on chat.freenode.net and irc.freenode.net). The steps I took were the simplest ones: Edit > Accounts Add...Protocol: IRC Network: FreeNode Nickname: pedrosanta Real Name: Pedro Santa Start session This is very, very strange. Anyone got this too? Can you shed me some light on what's happening or how can figure that out? FYI, I'm using the Portuguese version.
I'm trying to port binutils to a new architecture. I have changed and created necessary files for this. The configure commad run succusfuly. but when I tried to run make I find probems. the error msg is:
I am currently working on Debian based Operating System, and my objective is to make a live CD.
I ve followed the specified steps to buid a live CD, and finally I ve made an .iso file too.
Now,I am facing some issues to execute that .iso on Qemu(Virtual Interface),those are:
1. While builing it into an .iso,I skipped the md5sum step, is that mandatory to be built for making a live CD?
And when I am trying to make an MD5SUM using the following command, Its giving me the following error:
Kindly specify me, where exeactly the error in the command for creating the md5sum?
2. While executing the .iso file in Qemu using the following command :
And the I am able to watch the Operating System booting initialization and then when I select the option as "Install as Live CD" Its giving me the following error:
I request who ever reads this thread, please send me some kind of a response.I'll be thankful to them.
I tried to build linux-2.6.36 but I got this error message
Code:
I looked into gcc-version.sh but the problem is located somewhere else I thought at first one of the files might have been corrupted and I downloaded the archive again.
I must also say that this happened in different versions of slackware (the distro I use): 12.0, 12.1, 12.2, 13.0, 13.1
I am trying to setup empathy to use yahoo im. I have searched and searched and apparently I cannot find a resolution. Does this work for anyone? Is there another IM option that will? I can connect to msn without error, but for yahoo account, i just get a network error.
I am using Centos 5 with an old kernel. I want to build the latest version for atheros 5K wireless drivers. So i downloaded, and compiled with the ".config" which is already in /boot , and made it ready to run.
However, whenever i try to boot with new kernel, after choosing it from the grub menu, i got the following error. I tried many many .config files but the result was the same.
Here is the screen capture of the error;
I'm trying this process for a week without any success...
I'm building a 3-node cluster. I have created ocfs filesystems and mounted them on the first two nodes. But while mounting them on the third node , i'm getting this error for 8 of the total luns. all these 8 luns are of 1GB size.
I've unmounted these 8 luns from the other node and tried to mount in the third node ... and then it was working and again the error occurs in the second node. My observation was for some reason these particular luns are not allowing the third node.
mount.ocfs2: Invalid argument while mounting /dev/mapper/voting1 on /voting1. Check 'dmesg' for more information on this error.
I'm running Ubuntu 8.04. I've got sqlite3 installed, but I keep getting errors when trying trying to install pysqlite (2.4.1 or 2.5.1).
If I run $ python setup.py build things look like they're going ok for a while, but then I soon start getting errors:
There's a whole load more stuff, ending up with:
gcc -v tells me that gcc exists so I think that last error must be a red herring.
However, after searching the web and trying lots of things, I've not managed to build pysqlite.
In case it's relevant, setup.cfg contains the following (after attempts at various things having tried following up on some suggestions I found posted elsewhere):
I have an FC13 x86_64 server and having trouble building RPMs, but I don't think it's specifically an RPM problem. I think it's a tty management or other type of problem.
When spec files have a "%files -f filelist.txt", which contains the list of files for the RPM, it calls the /usr/lib/check-files script, which sorts the files that are supposed to be in the RPM and compares them with the files that are in the built RPM before they are packaged.
The trouble is that the sort fails.
Here's the trace from the check-files script:
The above doesn't show that the output from sort is redirected into those /tmp files. The first sort succeeds because it reads data sent by the "find" in the same shell. The second sort fails because (I think) it cannot read data from stdin for some reason.
What could possibly cause this? I've checked various permissions, libraries, even used strace extensively, all of which is inconclusive.
This is one of my test server boxes, so this problem is something that I've caused, but I have no idea what.
libc controls input and output, correct? Could it somehow be a glibc problem, or a devpts problem? I can run a simple command and pipe it to sort with no problem. It appears to only be related to sub-shells.
I also replaced sort with cat and just tried to redirect stdin in that file to a temporary file, and that also fails.
I've tried running it with selinux disabled and that has no effect.
I've been trying to install Compiz 0.8.4 from the source code provided by the Compiz people.
However, when I run make on the first set of code (compiz-0.8.4 tar package), it halts with the following error:
Code:
As well as --disable-gconf and --disable-gnome since gnome isn't install on Slackware (I've also tried it without those, but it picks up on it anyway and throws them out). The folder I'm running this from is /root/Desktop/Compiz Fusion/compiz-0.8.4.
I've been trying to create a RAID5 array with 4x1TB disks.
I'm using Ubuntu 10.10, uname output:
Quote:
Linux dynamips 2.6.35-22-server #33-Ubuntu SMP Sun Sep 19 20:48:58 UTC 2010 x86_64 GNU/Linux
I have two of them connected to the on board ICH7 SATA controller (sdb and sdc), and two of them connected to an external Silicon Image SiI 3132 controller (sdd and sde). sda is my boot disk split into several partitions and is also connected to the onboard SATA.
Everything is working fine before I create the array, here are my hdparm outputs:
Quote:
/dev/sdb: Timing cached reads: 2958 MB in 2.00 seconds = 1478.89 MB/sec Timing buffered disk reads: 360 MB in 3.02 seconds = 119.35 MB/sec /dev/sdc: Timing cached reads: 2940 MB in 2.00 seconds = 1469.77 MB/sec code....
New installation of Suse 11.3. Trying to build Cinelerra-CV from [url]
Quote:
The source code of Cinelerra-CV is available from a git repository. To get a copy for compilation use the following command
You can modify this working copy, and submit your patches to the mailing list, or ask for your own repo or for permission to push to one of the existing ones.
From the README.BUILD file, you are told to build autoreconf -i.
This gives an error:
Code:
Running autoreconf with the "force" option works:
Code:
After running ./configure, and then make, there are errors:
Trying to get Midori browser from SBOpkg's and one of the dependencies is libsoup.configure: error: GLIB 2.21.3 or later is required to build libsoup.Anyone able to give me a pointer in the right direction to overcome this.
I use Slackware 13.0 with the 2.6.33.2 kernel, and I use GnomeSlackbuild.I tried to get help on their discussion group, but I didn't get any.I'm trying to build gnome-power-manager 2.30, because it uses the new upower interface (so it seems). I have GTK+ 2.18.9.
