Networking :: Ssh Sessions Disconnect "network Error Software Caused Connection Abort" Error - Router?
Aug 6, 2010
Ive recently switched over to AT&T Uverse TV/Internet service and I've noticed that when I ssh into my linux( 2.6.18-194.3.1.el5xen CentOS) server I get disconnected. When I'm using putty it gives the "network error software caused connection abort" error. When I'm at work using one of our jump servers and ssh'ing from the command line it will freeze up from time to time but never disconnects. I think the problem is either with the OS or the new AT&T modem. At first I had my CentOS server using DHCP and it would disconnect within a few minutes after I ssh'ed. I switched over to a static IP and now it goes about 10 minutes before it disconnects. It doesnt matter if I'm actively typing or not, so it's not an inactivity issue. I have the firewall turned off on my laptop, and since the issue happens on multiple devices, including my iphone I dont think thats the issue.
I have iptables and selinux turned off/disabled so thats not it. In putty I have enabled Keep Alive(30 seconds) and it still disconnects. I opened the port on the modem to allow ssh for the IP of the linux server. Ive also recently reinstalled this server with CentOS so I can't compare with the previous internet provider as I didn't reinstall until after I switched over. BUT previous installs with CentOS 5.2 worked fine with the previous ISP. AT&T Modem is a 2wire 3800HGV-B
View 5 Replies
ADVERTISEMENT
Feb 9, 2010
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
View 5 Replies
View Related
Feb 11, 2010
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error. In the Putty , i configured: IP : IP address of computer Ubuntu. Port 22 Connection Type SSH This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I already checked computer with ubuntu : /etc/ssh/sshd_config: in this file port 22, PermitRootLogin yes.
And in this machine installed with openssh-server, and openssh-client. But in this time, this error is maintaining, i don't find idea to fix this error.
View 10 Replies
View Related
May 1, 2010
I'm at the end of my rope here, and am extremely frustrated. I have a web server running on Ubuntu Server and am using OpenSSH for all my SSH and sftp needs. However, I have the strangest of all situations that I cannot for the life of me figure out.
I have a user chrooted to /var/www/username in /etc/ssh/sshd_config and in /etc/passwd. When the user is chrooted to that folder, whenever I try to log in through SFTP using any client, I get an error saying "Network error: Software caused connection abort." The kicker is, when I chroot the user to /var/www that user can log in just fine. I've tried changing every chmod and chown setting I can think of, and I have NO idea why it matters by one folder.
I had the jail working perfectly for about 2 hours, when it seemingly just decided to stop.What's really getting to me is why the two folders, which have the exact same settings, are not operating the same way.
View 4 Replies
View Related
Jun 23, 2010
I just recently installed RT Tracker 3.8.8 on a Centos 5 VM install. I've been running 3.6.6 for more than a year now with no issues. But I'm having some serious slowness issues with 3.8.8. When I start the httpd service at least one of the processors go straight to 100%. It also tends to do this when you browse to it for the first time. I've been trying to figure out the problem, but I can't get a grip on this one. This error pop's up in the /var/log/messages log:
Jun 22 11:03:56 helpdesk RT: Apache2::RequestIO::rflush: (103) Software caused connection abort at /usr/lib/perl5/site_perl/5.8.8/HTML/Mason/ApacheHandler.pm line 1020 (/opt/rt3/bin/webmux.pl:79)
View 1 Replies
View Related
Feb 10, 2010
I am running centos 5.4, kernel 2.6.18. Also running httpd (apache2) as a reverse proxy with the following modules
mod_ssl
mod_cache
mod_proxy_*
Recently after updating these modules:
mod_ssl x86_64 1:2.2.3-31.el5.centos.2
httpd x86_64 2.2.3-31.el5.centos.2
distcache x86_64 1.4.5-14.1
I am getting wierd errors in the error logs:
[Wed Feb 10 15:44:18 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data
[Wed Feb 10 15:44:45 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data
[Wed Feb 10 15:44:48 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data .....
View 1 Replies
View Related
Jul 31, 2010
I recently installed Ubuntu 10.04 on my Acer TravelMate 3270 notebook (with Windows 7 dual boot) for everyday use. All is great except i started to notice my Wireless Network get disconnected and then reconnects every 5 minutes or so. Also the NetworkManager Applet 0.8 keep annoying me with the notifications that its disconnected and then reconnected.
I do not have this issue while using Windows 7 (in the same area). Can this be fixed. As i really want to move my day to day computing need to Ubuntu.
View 1 Replies
View Related
May 16, 2011
Network-manager-gnome caused an error during system update.Quote:network-manager-gnome: Depends: network-manager (>=0.8.99 but 0.8.4~git.20110319t175609.d14809b-0ubuntu3 is to be installedHow can I update network-manager?
View 1 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Nov 13, 2009
While attempting to install CentOS 5.4 x86_64 from DVD (downloaded torrent), I encountered a fatal error that aborted the install and dumped a bunch of log files. I attempted this a couple of times resulting in the same error. I tested my hardware via CentOS 5.4 x86_64 live cd without exception. Here is my install configuration:
1)Booted to DVD
2)Skipped media test
3)English (English)
4)U.S. English
[Code]....
View 8 Replies
View Related
May 12, 2010
I have laptops with intel 4965/AGN wireless hardware and ubuntu jaunty. My wireless access point, router, gateway is a D-Link DIR-655. The D-Link is directly connected to my cable modem. The connection does not drop, but They suddenly quit talking with each other. After a brief time lapse, they start talking again without intervention on my part. When I say "stop talking" this is behavior where a browser will return "page or server not found" errors or "DNS timeout". Has anyone seen this sort of network behavior and have some idea about corrective actions?
My attempts to get some help from D-Link have not been successful. Since there are not hundreds of folks reporting troubles, they don't [want to?] understand one poor souls problems.I've tried to ask about this several times and several places.
View 4 Replies
View Related
Jun 2, 2010
If I ssh to a remote machine and then lose internet connectivity, the session freezes. I can't control-c or otherwise abort and go back to my local xterm or terminal prompt but if I wait several minutes it will do so.
There must be some way to force it to abort the remote ssh session when connectivity is lost. I'm on a Mac but I believe this happens on cygwin or linux as well.
View 2 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Nov 1, 2010
I changed the network setting and caused a problem of wireless network. After I completely reinstall the OS of Fedora 13, the wireless network is still incorrect for connection to router.
View 4 Replies
View Related
May 26, 2009
My computer takes a while to connect to my Linksys N router.
It used to connect in a snap of your finger automatically.
Now it does not.
Yes I have tried manual configuration, and double checking the password, ssid, protocols, and security type.
WPA2 personal is the security type.
There are maybe 4 different ways I know how to connect. The most annoying thing is when this box pops up saying to type in a password for the network connection.. and keeps popping up even when everything is right.
All I need is a reliable, easy, and automatic program to connect me to the internet, maybe even before I log into my system.
Linux Ubuntu 8.04 LTS Desktop Edition is my system. Brilliant system.
View 4 Replies
View Related
Apr 6, 2009
This computer is using a Linksys WMP54G network adapter, and running Linux Ubuntu 8.10 with all of the latest updates. It was working fine for a couple months, then one day the internet quit working on it. I've tried playing with all of the settings, and can't get it to connect to the network. The windows computers in the house work fine. I also hooked my Linksys WUSB54GS USB network adapter and that worked right away. When I put the WMP54G back in, it will detect the networks but it won't connect. It gives the message, "the network connection has been disconnected", right away. Can someone please help with this. I work doing tech support for a small ISP and am excellent troubleshooting Windows but Linux is another story.
View 3 Replies
View Related
Sep 9, 2010
As usual, I let the update manager run.. But now something bad happened and a red button is showing in the system tray, which when I hover my mouse over it, tells me to open package manager or try "sudo apt-get" in terminal to see what is wrong..
If I enter sudo apt-get upgrade, I get the following errors.. How can I fix it.. I am unable to open package manager itself..
Code:
E: Problem parsing dependency Depends
E: Error occurred while processing gconf2 (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
View 2 Replies
View Related
May 29, 2010
I tough that firefox was the problem of my very slow web sites loading, but I am suspecting that sometimes the internet connection is the reason, maybe for some reason that I don't know it can not just connect to the site.I am running Linux quick-desktop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux.when I browse the web it is very slow to load.sometimes I get this error message.Could not locate remote server.Even I know the site is up running like google.
View 6 Replies
View Related
May 6, 2010
Unable to mount NFS server on the client.
Getting the following error.
mount: RPC: Remote system error - Connection timed out
View 3 Replies
View Related
Jan 9, 2010
I have a cisco linksys wireless adapter (WUSB600n) which, most of the time, great when booting up. But mostly after some time (1min- 1hr.) it disconnects. When checking the status I can see some of the networks around me, including mine. But selecting it doesn't do anything. I searched the forums and tried:
sudo dhclient
and
sudo /etc/init.d/networking restart
But still no connection; the only thing that helps is rebooting.
View 2 Replies
View Related
Jan 6, 2010
I have recently installed 9.10. Under 7.04 thru 9.04 I have a bash script and php script that I used to send announcements about club events.When I tried it today, I get errors. Here us the command line script I use to call the php mail handling script.
Code:
#!/bin/bash
## member calling for Dave
[code]....
View 4 Replies
View Related
Jul 20, 2010
do not post such long blocks of messages directly on the forums. Attach the output as .txt or use a pasetebin.
View 5 Replies
View Related
Jun 23, 2010
My network is barely functional. I'm running 2 linux servers connected by openvpn (tun) through routers on both sides. There are Windows clients (98 and XP) on both subnets. One server (ls3) acting as PDC for the domain. The Windows clients use the respective linux boxes as gateways. On the server side (ls3 which is both openvpn server and samba server), all the clients can read/write properly to shares on both sides. The problems are all on the client side. Share connections to the server side disconnect after a few moments.
Browsing on the client side windows machines is fine. I can see shares on the server side. Some server side files open and are readable, writable, other server side files will not open. Some samba logon scripts on the server side can be opened from the client side. Others open after a long wait to a blank file! Permissions on server side files are set to 777 for testing. If a file won't open or reads "blank", that doesn't change no matter how many times you try. A non-readable/writable file overwritten by a readable/writable one can be read and written to!
I can ping successfully from any client on either side to any other client by either ip address or workstation name. Firewalls on both side are set to forward tcp and udp traffic going to port 1194 to the respective gateway linux boxes. Iptables on both linux gateways are down for testing. I tried reversing the openvpn server/client roles with the same result; the same physical side of the network had the problem. On one of the windows 98 clients, I wiped out the networking configuration completely and rebuilt it from scratch. Same result.
One one of the windows xp clients, I tried to rejoin the domain. It went through successfully but the result was the same as above. The network was operating smoothly for several years until the client side dsl modem broke last week. It was replaced with a newer model and at the same time I migrated from a pptp connection to openvpn. How to resolve this, Is this something to do with openvpn? Is this a network hardware problem? Am I missing something in the port forwarding on the routers? My smb.conf files are ancient except I added interface tun0. I have never seen 2 files sitting next to each other in the same directory where one opens and the other doesn't!
I'm running Mandrake 9.2 on the client side and Mandriva 2008 on the server side. I have a Sonicwall firewall on the server side, a Westell 7500 on the client side. I note that during the modem install, the http port was opened to the linux box on the client side and the access log got huge over the weekend and I ran out of disk space until I closed it down and deleted the log. I tried a simple test while viewing /var/log/daemons/errors on the client side. From a windows workstation in the client subnet, I opened a dos window and tried to print a file located on the samba server on the openvpn server machine which I knew NOT to be problematic.
The file printed and there were no errors reported in the log. I repeated the test with a known problematic file. The file would not print. The errors log noted:
Authenticate/Decrypt packet error: packet HMAC authentication failed
I regenerated the static.key file on the server side and scp'd it to the client side and restarted both openvpn's. I checked for duplicate files named static.key on both sides. Same error.
View 1 Replies
View Related
Jun 11, 2010
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
View 1 Replies
View Related
May 2, 2010
Since I upgrade to Ubuntu 10.04 my wireless connection is very unstable. I install the needed wireless drivers from 'Hardware Drivers' (Broadcom STA wireless driver) and I got wireless connection, but it randomly disconnect, and also connection is very slow.
I think that the problem are the drivers which are not very compatible with this version of Ubuntu, which means we need to wait for update? I have HP ProBook 4510s laptop, Intel PRO/Wireless 5100 AGN network card & Gembird NSW-R2 router. I'm only having this problem on Ubuntu 10.04, on other OS's the internet is fine.
View 7 Replies
View Related
Apr 30, 2011
I have a home network with one computer with ubuntu and two laptops with vista and one router. Last month, ubuntu could access files on vista machines and vista machines could access files on ubuntu machine. Everything great. The only change was an update to ubuntu 10.10 in april. After the update, the ubuntu machine can access files as before, but I get "The network name can not be found" the connection has not been restored". What changed in the last update, and what must i do to restore access to Ubuntu files?
View 1 Replies
View Related
Apr 30, 2011
I power on my computer, it is no wired network connections.
I tried command ifconfig and lshw -c network . it could find the network card eth0.
Quote:
Quote:
View 3 Replies
View Related
Nov 14, 2009
I'm extremely new to SuSE Linux. I wanted to move away from Windows and so I decided to reload my Desktop with SuSE linux.I have had no trouble until now. I'm trying to connect to my work VPN connection. From my laptop (which unfortunately is Vista) I'm able to connect without any issues. However, when I tried out the KVPN application on my SuSE linux, it just doesn't work. I get the error:
Authentification has failed.
As a side note, when I type ping google, the packets are received 100% but when I ping my company address, no packets are received. Hope this info is useful.
View 9 Replies
View Related
Jun 19, 2010
(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:
[code]...
View 1 Replies
View Related
Nov 1, 2010
I'm having a little problem here. That, or I'm missing the obvious staring me in the face. I have this file server, called toad. I nuked it's system disk, reorganising the partitions and upgrading to openSUSE 11.3 x64. I installed vsftd with "Yast FTP server", and the config looks OK. I even compared it with that of another machine. But when I try to connect, this is what I get:
user@mainmachine:~> ftp
ftp> open toad
Connected to toad.geuens.org.
500 OOPS: could not bind listening IPv6 socket
I'm prettige sure IPv6 is deactivated. The firewall is disabled on both machines. I've looked this over again and again. Can't find it. It's not the connecting machine, I've tried from another.
View 4 Replies
View Related
