Software :: Install Debian From USB And Network
Apr 19, 2010I tried to install Debian from USB and network (with debian-testing-amd64-netinst) but during installation the Ethernet card is not detected
View 9 Replies
ADVERTISEMENT
Debian :: How To Install Printer On Network
Jun 26, 2010I installed a 'Brother' laser printer on Debian. It works fine. Installation was fairly automatic. I now have another desktop computer using Vista Windows. How do I install the printer on my home network? Is there something I have to do with Debian? The Debian computer has a parallel port for my printer. The Vista computer does not have a parallel port; so I can only use the Debian computer.
View 6 Replies View RelatedDebian :: Configuring X From Network Install?
Dec 1, 2010This time I'm attempting to get Xorg up, and running. I've done a minimal Debian install from a network install disc. I used aptitude the install the following, with the dependencies configured automatically I assume:
- xorg
- openbox
- xserver-xorg-video-n (Where n is your graphics card family)
I've rebooted, and no X. I've typed in 'xstart', with no result. I've even typed in 'Xorg' at the CLI where it loads to a black screen, and hangs. I had to power off the PC by holding down the power button.Is there something I'm missing to configure/run it for the first time?
Debian :: Install From Local Network Using 5 DVD ISOs
Apr 7, 2010I have the 5 Debian 5.02 DVD/ISOs, and would like to set up a local server from which to perform installations using a PXE bootloader and the local LAN. Any pointers to how I might accomplish this? All of the online resources I've found for network-based installs expect to do all downloading from a remote mirror, and I would prefer to limit my network traffic to the local LAN. Also, I want to install to multiple new hosts, and would like to avoid doing a lot of babysitting and swapping DVDs in and out of the drives (and some hosts are without DVD readers).
View 12 Replies View RelatedDebian Installation :: How To Install Wireless Network Driver
Nov 11, 2014I've been in a difficult situation since we're having only wifi and there is no way to connect my laptop to the internet via a LAN cable.
Debian's packages don't support my wireless card. However this one works: [URL]
Is there any way to install this driver for the Installer to connect to the internet while installing?
I don't know what exactly to do when the Installer ask for my network driver so that I can use it.
Debian :: Install Wireless Network Card On Desktop?
Mar 5, 2011Here ASUSTeK Computer Inc. - Networks - ASUS PCE-N13
you may download the driver and install it yourself; once you've succeeded, I am a one-time Linux convert and quitter that gave up on Linux a long time ago, because frankly it is too complicated and I'm just a user who needs to get things done today, not in the few weeks time it takes to figure these things out. Since Debian Squeeze got released I wanna test it out, but my PCI card, ASUS PCE-N13 needs to be set up.
Driver install too technically advanced.
The accompanying instructions are far from self-evident:
================================================== =====================
Build Instructions:
====================
1> $tar -xvzf RT2860_Linux_STA_x.x.x.x.tgz
[Code].....
Debian Installation :: Impossible To Find A Wireless Network During Install
Jul 30, 2015I try to install Debian 8 on my desktop PC that has a wireless network card.I had already used this computer with debian 7 and I could use my problem-free network connection.
My network card is : Asus PCE-N10
During the installation, a message occured to ask me to load a firmware (rtlwifi/rtl8192cfw.bin) which is loaded from a USB key.After this, Debian-installer seems to find my wireless card but can not find wireless network.I have this message, translated from French: "The search for an available wireless network failed" and I can enter an ESSID but inconclusive.
Debian Installation :: Network Not Detected Eth0 At Install Squeeze?
Aug 11, 2010I am trying to install squeeze on a new netbook Packard Bell Dot S2 installer fails at not able to make an ethernet connection through this >> Atheros AR8131/AR8132 Gigabit/Fast Ethernet Controller. So i am unable to make progress with the install? I am using the debian-testing-i386-businesscard image.
I also have a wireless connection but thats a wpa setup that doesnt seem to be supported on the installer just wep or am I wrong?
Debian Installation :: Network - Find The Additional Files To Install
Sep 5, 2010I have made a Debian minimal installer on a USB drive according to this manual: [URL] I have installed a minimal version of Debian, meaning text-only, with only the kernel, shell, filesystem, and a few programs. Now I need to install the rest of it over the internet. So here are my questions:
1. Where can I find the additional files to install?
2. Where can I find a manual that tells you how to install them? This manual doesn't say anything about that.
3. Are you supposed to install the files during the installation process, or do you get them online through the minimal Debian (using wget, etc.)?
Debian Installation :: Testing Install: Network Configuration Fails?
Sep 14, 2010I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
Debian Configuration :: No Network After Reboot Of Scratch Install Of Jessie
May 2, 2016I've been using various distros of Linux for over 20 years - but I'm stumped.
Was running Mint. But after taking an update a few weeks ago the network stopped working. After a lot of time and effort decided to give up on Mint and switch distros to Debian 8 Jessie.
But after changing the Network settings from default DHCP to my usual IPV4 static 10.net configuration and rebooting the network will not work.
I have several systems on a 10.100.0.0/16 LAN behind another Linux system acting as firewall/gateway.
Now, after about 7 hours of mining the Internet, I still can't get basic networking to work:
- Have tried a few combinations, with and without Network Manager and eth0 in interfaces
- /etc/network/interfaces is configured with a static IP and relevant parameters
- ifconfig shows eth0 and the correct information
- netstat -rn shows the basic default route to the gateway
- have tried with IPV6 enabled and disabled; it is not used on my LAN
The box is a desktop system, ASUS Maximum VI Formula mobo with onboard Ethernet, dual GTX 780 cards. Nothing very weird.
It all LOOKS right, but ping can't get off the box "destination unreachable", and no other system on the LAN can ping it.
I'm amazed a basic static IPV4 network setup completely breaks it. This is my main workstation - a dual-boot system where Windows runs fine - so it's not hardware.
EDIT: This has been solved. See the solution post: [URL]
Debian Installation :: Install Lenny Via Hyper-V - Can Not Find My Network Card
Sep 15, 2010I am trying to install Debian Lenny via Hyper-V. I get to the point where it asks for the network card. For some reason it can not find my network card. I have a RealTek (RTL8112L PCIe Gigabit LAN controller featuring AI NET 2 built on motherboard).
For some reason it doesn't see it. My issue is if I continue without the network how am I getting the drivers? Unfortunately Hyper-V doesn't support USB. I guess I can try to burn to CD but not looking to waste a cd for 480k and not sure that will work as I only see a auto.sh and a couple other files under scr directory. If anyone has any ideas please let me know. This is a fairly new Motherboard/NIC so I do not understand why it isn't recognized. I know it cant have everything but Realtek is a fairly common nic.
Debian Installation :: Wheezy Network Install On Laptop No Keyboard Or Mouse?
Apr 19, 2011anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there
Debian :: Install Ethernet Network Card Module For Notebook Toshiba QOSMIO X500-121 64-bit On Lenny?
Feb 16, 2011How to install Ethernet network card module (driver) for the Notebook Toshiba QOSMIO X500-121 64-bit on Lenny?
View 1 Replies View RelatedDebian Installation :: Missing Network Drivers / And Missing Make To Install Them
Dec 1, 2014I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies View RelatedDebian :: Installing Network Printer - Able To Print To One Of The Network Printers From My Desktop
May 10, 2010Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies View RelatedDebian :: NetworkManager Applet Shows No Network While Connected - Wired Network Device Not Managed
Oct 30, 2010I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
Debian Configuration :: Getting Network Error - Every Time Rebooting My Server Lost My Network Config
Mar 3, 2011I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
Debian :: WICD Network Manager Does Not Detect Any Network / Resolve This?
Jan 16, 2011I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
Debian Installation :: Network Interface Up But Network Manager Not Working?
Aug 20, 2010Config: Squeeze, 2.6.32-5-amd64I just installed squeeze and the network is up and nm-manager deamon if working but the Gnome applet doesn't seem to work as usual. It indicates no network although the network is available as indicated by ifconfig and route below. When I switch WiFi on, the nm works flawlessly. When I click on the applet icon it says "Wired Network: device not supported" (or similar, msg in french is
eth0 Link encap:Ethernet HWaddr 00:1f:e2:12:ea:d8
inet adr:192.168.0.182 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21f:e2ff:fe12:ead8/64 Scope:Lien
[code]...
Debian :: Network Manager Can't Share Network Connection?
Nov 13, 2015In Googling around it appears that the Network Manager used to have a nice simple (obvious, logical, straightforward, intuitive, easy-to-use... ... can you tell I'm a bit surprised that there's not a simple button to do this, it's pretty common functionality ) option in the IPv4 tab called "Shared to other computers" allowing you to share your network connection with any computers connected to yours... kind of like this:
[URL] ....
Professor Google seems to indicate that this may have existed in Debian at one point but, I don't see this option anymore. How do I get it back (or is there another gui way to do this without editing the /etc/network/interfaces file... if there's no other way to do this... that's fine but I'd prefer an easy method of enabling and disabling sharing)?
What I'm trying to do... I have a Beaglebone Black connected via IP over USB. When I'm ssh'ed into the BeagleBone, I want to be able to use aptitude install to grab new packages etc... and that kind of requires access to the outside world. Everything I've found so far seems to to require a modification to the interfaces file but since (according to the interfaces man page) the preferred method is to use the network manager if possible... I'm trying to avoid that.
* It should be noted that I'm running sid with the experimental 4.3 kernel so... maybe in doing so I've shot myself in the foot?
Debian Configuration :: Network Not Work When Use 2 Network Cards
Oct 24, 2010I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.
I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.
The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.
OpenSUSE Network :: Network Not Work \ After Install All Packet On Test Internet / Update Was Error?
Jan 5, 2011I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedOpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?
May 12, 2011I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedNetworking :: Install Mrtg On A Client Computer In Network And Measure The Network's Router Traffic
Sep 4, 2009I wanted to know if i can install mrtg on a client computer in network and measure the network's router traffic.i know that it can be installed on the server.
View 5 Replies View RelatedOpenSUSE Network :: No Internet After Install Of 11.4 Network Connections Fine
Mar 12, 2011I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
OpenSUSE Network :: 11.2 Install - When Exit YaST The Network Doest Show Up - No Icon In The System Tray And Doesn't Even Try To Connect
Jan 16, 2010I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
OpenSUSE Network :: 11.2 Couldn't Setup Network On Install
Jul 4, 2010I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
View 9 Replies View RelatedOpenSUSE Network :: No Network Devices Recognized On New Install
Feb 24, 2011Just installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
OpenSUSE Network :: No Network After Update Install
Jul 24, 2010I have configured OpenSuSE 11.1 in VirtualBox and Networking was working fine and I was able to access network. Yesterday I recieved update notification from SuSE and updated machine. Now after restart eth0 is not comming up. In Hardware profile I can see Network Card but it is not configured automatically. I don't know how to configure it. Virtualbox Networking was working before latest update and just tried in other virtual machines.
View 9 Replies View Related
