Debian Installation :: Wheezy Network Install On Laptop No Keyboard Or Mouse?

Apr 19, 2011

anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there

View 13 Replies


ADVERTISEMENT

Debian Installation :: Wheezy USB Keyboard And Mouse Stops Working

Mar 24, 2015

After installing KDE USB keyboard and mouse won't work. They are added to /proc/bus/input/devices though.

I also tried to install Gnome; same thing.

I took #usb-devices and they were there also..

But #usbhid-dump did not generate anything to screen.

View 4 Replies View Related

Debian Multimedia :: Wheezy - Startx Kills Mouse And Keyboard?

Jun 1, 2011

I rebooted my system about a few days ago to find that whenever X was started, my mouse and keyboard would not function. I am unable to even switch to another tty when this occurs, however alt+sysrq+r will allow me to switch ttys again.

Xorg.0.log
[    70.287]
X.Org X Server 1.10.1
Release Date: 2011-04-15

[code]....

View 11 Replies View Related

Debian Installation :: Wheezy Installer Not Recognizing USB Keyboard

Jul 6, 2011

I am using Wheezy netinstall on a USB stick. The machine has an Intel DH57JG motherboard, USB keyboard, and no optical drive. The installer loads to the initial screen OK, but the keyboard is not active. This problem has been reported for several years and was supposed to be fixed by kernel 2.6.32, yet here it is. What can I do?

One suggestion has been to disable/enable USB legacy support in the BIOS. It is enabled by default. If I disable it, the installer doesn't load. This keyboard works fine on other Linux machines and on the BIOS in this machine. I read there was a problem with Cherry keyboards and the Squeeze installer. This keyboard is not a Cherry but does have Cherry keyswitches.

View 1 Replies View Related

Ubuntu Installation :: Upgraded Laptop With Plugged In Usb Keyboard -> Laptop Keyboard Not Working?

Jun 29, 2010

I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc

View 2 Replies View Related

Ubuntu :: No Mouse Or Keyboard Support (10.04 Laptop)

Jun 5, 2010

using U10.04, i upgraded from 9.04, now keyboard or mouse wont work. using a laptop, ect

View 9 Replies View Related

Debian Installation :: No Mouse And Keyboard In Stretch Amd64 Installer

Oct 25, 2015

I have Asus Z87-PRO motherboard with i5-4670k and I'm trying to install Debian Testing with 64-bit architecture. My problem is mouse and keyboard (I guess USB in general) stop working after installer get loaded (the last thing I do is choose between text and graphical install). I found a few topics on different forums indicating that I should enable IOMMU (Intel VT-d) option in my bios.

The problem is that Intel k-series processors didn't use to have IOMMU support, so there's nothing I can do about it. I tried changing different bios options like disabling UEFI, enabling xHCI and EHCI with no luck. Passing "iommu=off" or "iommu=soft" to the boot command also doesn't work. However, I have LMDE 2 64-bit live cd (based on Debian Jessie) and it works fine, so I guess my problem may be related to some changes in 4.2 kernel.

View 3 Replies View Related

Debian Installation :: Plug USB Mouse And Keyboard In After This Failure Which Then Works

May 10, 2011

I'm trying to net install Wheezy on an Abit IC7-G PIV system. I tried this months ago but the problem still exists. This is not so much an installation problem but after installation when it boots, I lose PS/2 mouse, PS/2 keyboard and network. I get:

startpar. service(s) returned failure udev ... failed I can plug USB mouse and keyboard in after this failure which then works. There is nothing wrong with the hardware. It works fine on other systems. Squeeze works perfectly.

View 7 Replies View Related

Debian :: Accessing Installation Directly Via Mouse / Keyboard And Monitor

Mar 5, 2016

I installed a copy of Debian Jessie server and then tried to install a light GUI, specifically XFCE4. I am accessing my installation directly via a mouse/ keyboard and monitor, not remotely. After installing the Debian server software, I ran the following commands: apt-get install xfce4

It all appeared to go well, with no error messages. I then tried to launch the XFCE4 interface by running the following command: xfdesktop.However, all I get is the following error message:Failed to parse arguments: Cannot open display.what I need to do here to succesfully launch XFCE4?

View 2 Replies View Related

Debian :: Bluetooth Mouse Doesn't Work In Wheezy

Aug 3, 2011

I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization

I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.

View 14 Replies View Related

Debian Installation :: Install Ubuntu 14.04 Alongside Wheezy

Apr 23, 2015

I have a laptop primarily used for a client work. It is running Debian Wheezy, and wish to keep it intact in case I need to do more work for client.

I would like to install Ubuntu 14.04 alongside Debian, and use Ubuntu as a bit of a play/experiment area, etc... HD has lots of space (600GB free), and as far as I can tell Grub is installed in MBR.

I did some searches, and from what I can tell, it sounds like I can just install Ubuntu from ISO file, specify how much space to use (say 400GB), and that's it. This sounds almost too easy. Once I install and restart machine, will there be selection for what Distro to boot.

View 6 Replies View Related

Debian Installation :: Wheezy Sources Not Working After Install?

Apr 7, 2011

I have just installed Wheezy after repartitioning and had to set up my sources list myself as (most of it) was not done for me. I have just added the main official repository,security updates and the multimedia repository. To be honest I'm not sure if any of them are working when I do an update in aptitude, I think the multimedia one might be. The CD ROM isn't even working despite the fact I have done apt-cdrom add.I am getting the following when run aptitude update:

Ign cdrom://[Debian GNU/Linux testing _Wheezy_ - Official Snapshot i386 CD Binary-1 20110328-05:16] wheezy InRelease
Ign cdrom://[Debian GNU/Linux testing _Wheezy_ - Official Snapshot i386 CD Binary-1

[code]....

View 6 Replies View Related

Debian Installation :: Wheezy Install 7.8.0 - Cannot Stay Connected Through WiFi

Apr 2, 2015

I love using wheezy but i keep having to take my computer downstairs to hook it up to router through ethernet, i need it to connect through wifi and stay connected.

heres my problem, if i use live image and connect to network its fine but during installation process it gets to the network configuration, it will keep disconnecting at dhcp and if i try and continue it gives me the error packages broken due to it not staying connected.

MY WIFI CARD IS A TP-LINK WDN 4800

if i try and just do a net install then it doesnt show my wifi network.

it uses in both cases ar93xx atheros driver for installing, i just need to know how i can try and keep a stable connection over wifi so it can install over wifi so i dont have to keep taking pc downstairs to install it.

i done something that stopped me being able to login into wheezy i was left at black screen with blinking command line, i have reverted to mint debian until i can get a stable connection over wifi to install wheezy again.

View 14 Replies View Related

Debian Installation :: Fresh RAID1 Wheezy Install - GRUB Just Does Not Work

Jul 26, 2014

I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.

/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition

/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect

/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /

/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap

update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0

I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.

Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.

setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.

View 3 Replies View Related

Debian Installation :: Select And Install Software Failing In Wheezy Stable

Oct 17, 2014

I am trying to install Debian wheezy 7.6 stable, i made a bootable pen drive with netinst but when it arrives the select and install software part i got a error that i cant know what error is because it does not show its name. Just appear a red screen saying that a part in installation fails: Select and install software. I guess that this error is when it is installing tasksel.

View 2 Replies View Related

Debian Installation :: Install Wheezy On Any System With Either AMD / ATI 68xx Or 69xx Card?

Aug 26, 2011

Has anyone had any luck in trying to install wheezy (latest testing snapshot available) on any system with either a AMD/ATI 68xx or 69xx card?All goes well in the install, but on reboot, all that is seen is a "_" and no text, and it hard locks.I am pretty sure this is a conflict with the video card drivers that get installed by default (and which should be blacklisted), but I have no idea how to fix it.The recovery mode don't work either, it is the same "_" with no text, and it ends up hard locking. There is no chance at getting access to a console at all.

View 5 Replies View Related

Debian Hardware :: Laptop Headphone Jack Stopped Working On Wheezy

Apr 3, 2015

My laptop's (Acer Travelmate P243-M-6456) headphone jack had been working fine, and has no issues when booted into Windows, but it suddenly stopped working.

I've gone through alsamixer, and the volume is up, and nothing seems to be muted, and I've tried to do everything I could throughout the sound options in the Gnome System Settings.

Here is my ALSA information script output : [URL] .....

View 0 Replies View Related

Debian Installation :: Install Cifs-utils On Wheezy Armhf 404 File Not Found

Aug 12, 2014

Install cifs-utils on wheezy armhf
apt-get install cifs-utils --fix-missing
Reading package lists... Done
Building dependency tree
Reading state information... Done

[Code] ....

View 7 Replies View Related

Debian Installation :: No Internet - Wheezy Install On Wiped Acer C720 Chrome

Feb 22, 2015

uname -a
Code: Select allLinux OpalMint 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux

lspci -nnk | grep -iA2 net
Code: Select all01:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
        Subsystem: Foxconn International, Inc. Device [105b:e058]
        Kernel driver in use: ath9k

[Code] ....

View 14 Replies View Related

Debian Configuration :: Wheezy - After Update Systemd Turn Off Laptop Screen On Boot

Sep 25, 2015

I decided to update all the software on my computer. Fortunately, it upgraded kernel version 3.14 to 3.16. I was happy to learn that suspend now worked on my laptop by calling pm-suspend, but it did not worked by closing the lid. So I search and found on debian's website that installing systemd and adding some config lines in /etc/systemd/logind.conf would sove the issue. So I followed the procedure and did like instructed, to end up with a computer that boots on black screen.

The last verbrose line I see on boot up is "kvm disabled by bios" and then it shutdown down the screen. The computer works, as I can login and shutdown by doing those operation blindly.

I tried removing systemd but it still does not work. If I use the old kernel 3.14 I can boot without any problem, but if I use kernel 3.16, I boot to a black screen. I remember successfully booting in 3.16 before installing systemd.

View 4 Replies View Related

Ubuntu :: 10.04 - No Mouse/keyboard And Network Connection

Apr 30, 2010

I've done an ubuntu's fresh install, and, once I pass the login screen, my mouse and/or my keyboard just get paralyzed.

With an USB mouse, this happens too. To apparently solve this issue, I just unplugged it and plug it again. Weird thing.

Then, since I installed 10.04, I just cannot connect to my home network. Every time I login, it seems connected but, never reach a website. I've tried

Code:

And then, I got an exclamation mark on network's icon.


I've tried already to upgrade from 9.10 to 10.04 and I got the same issues.

I'll give you some more infos that might be useful:

Code:

I am seriously considering to back to 9.10...

View 9 Replies View Related

Fedora :: Computer Seemed Frozen - No Mouse - Keyboard - No Network Visibility

Dec 21, 2009

so, last night i checked my e-mail, jumped on facebook for a minute and went to bed. i got up this morning and my computer seemed frozen; no mouse/keyboard, no network visibility.....nothing. the screen was just frozen. tried too ssh into it to reboot, but the network wasn't up on it. i had to hard reboot. NOW, it just reboots forever....and ever....and ever. i have a WinXP partition on there along with my F12 and that wont boot either. selecting a previous kernel does nothing either. it wont even boot off the F12 install DVD. just keeps rebooting. I've never had this happen to me. so, it seems like a hardware thing to me, but i dont know if its my mobo or the drive. i suspect a mobo issue as the drive still spins up and gets me to the grub menu.

View 2 Replies View Related

Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies View Related

Debian :: Unable To Use Either Keyboard Or Mouse?

Aug 29, 2011

For some reason I am unable to use either my keyboard or my mouse. No problem in etch up until now, even after rebooting.

View 1 Replies View Related

Debian :: No Keyboard And Mouse On Login Screen?

Jun 30, 2011

As the title says i have this error on both my main computer and my laptop. For my main computer see this post, that is when it happened. viewtopic.php?f=30&t=65743

I run the updates on my laptop a while ago and decided to restart it to check if everything went okay. It seems not.

The only way i can get on the desktop, is to choose the recovery mode, su to user and startx.

This is a common error during booting on both computers. Starting the hotplug events dispatcher: udevderror binding control socket, seems udevd is already running

It seems a little strange, same error on both computers.

View 2 Replies View Related

General :: Install 11.04 Via VNC On New PC (with No Keyboard Or Mouse)?

Sep 5, 2011

I have downloaded the latest Ubuntu.iso and extracted it to /tmp/ubuntu/ on my laptop. In the folder isolinux there is an isolinux.cfg file. I am trying to prepare a USB stick by modifying those files, so that when I boot from USB it opens VNC and puts a static IP of 192.168.1.125. How can I enable VNC and a static IP so that from my laptop I can do the installation of Ubuntu 11.04 without using a keyboard or mouse?[URL]..

View 1 Replies View Related

Debian :: Logitech MK330 Keyboard And Mouse (wireless)

Nov 17, 2015

I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?

During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.

View 0 Replies View Related

Debian Configuration :: Keyboard And Mouse Or Maybe Screen - Freezes

Mar 29, 2010

So it's a beautiful day and I'll be happily using my computer when I realise that the screen is no longer showing that I'm typing or moving my mouse (or finger across a touch-pad). I can leave my computer in this frozen/crashed state for hours. My only recourse is to drain the battery or hold down the power button until the computer shuts down. The computer is a Dell Inspiron 6400 laptop/notebook. As my memory serves, it has an ATI graphics thingy. Radeon 1400, maybe. But I've had the computer for years and this behaviour has emerged only the past couple of months, with seemingly increasing frequency.

The OS is
# uname -a
Linux polaris 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux
(aka Squeeze?)

Sometimes this happens within minutes of turning the computer on and logging into Gnome. Sometimes this happens only hours after I've started using the computer (mainly just surfing the web). Sometimes it is preceded by a loud boop sound and the following if I have console open, sometimes not. So maybe that's unrelated. But that happened just now so I thought I'd throw it in.

One weird thing: Usually this happens within an hour of starting to use the computer, but one occasion I noticed I had not had the problem for several hours. On that occasion, the only thing I noticed I was doing that was also unusual: I had turned on and forgotten about a kvm virtual machine. After I shut down the vm, I had about only a minute before the freeze. I'm surprised now that it hasn't frozen since I started typing thing. Maybe I should always keep this forum open in a browser window.

View 1 Replies View Related

Debian Configuration :: Keyboard And Mouse Not Reacting After Boot?

Jan 22, 2011

A couple of weeks ago I installed a new 4-core Lenovo PC and installed Squeeze on it - keeping it updated every day. When kdm or gnome display the login screen, my USB-connected keyboard and mouse don't react. When I then unplug and re-attach them into the same socket everything ist fine. Surely this can't be working as intended? I can however get into BIOS-Setup as usual during the initial boot-phase by pressing Crtl-S and F1. Things also are fine when selecting the debian version to run from the multi-boot screen.

I am enclosing the kern.log of the last boot below (don't know how to attach files!). In that I can see that on line 530 ist says New USB device found, idVendor=046d, idProduct=c03e (address: 5; optical Logitech mouse) and then on line 542 New USB device found, idVendor=046d, idProduct=c31c (address: 6; keyboard).
It seems to get "interesting again on line 632 etc. with the message usb 2-1.8: USB disconnect, address 6.

-------------------------------------
2.754607] usb 2-1.5: new full speed USB device using ehci_hcd and address 4
2.855589] usb 2-1.5: New USB device found, idVendor=046d, idProduct=0a0c
2.855594] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.855598] usb 2-1.5: Product: Logitech USB Headset

[Code]....

View 7 Replies View Related

Debian Hardware :: Mouse And Keyboard Not Responding In XServer?

Apr 14, 2011

I've just installed Debian Testing XFCE, and mouse & keyboard don't respond to any inputs. The keyboard works just fine in the Recovery Shell, that's why I suspect a problem with the XServer.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved