I want to install latest downloaded package of openssh v 5.6(tar.gz) from original site but not succeed.
steps followed:
1. remove rpm with: rpm -e openssh-ser....rpm
2. extract package, go into directory and run ./configure command
I have dowmloaded the latest version of Gnome Nanny, but have run into an instal problem at the first hurdle:
I have extracte the folder to Documents: Cd/ to the folder and run the ./configure command and get this message: No package 'pygtk-2.0' found
I have checked the install files and edited the lines which contain the above to now read pygtk -2.0 >=2.8 as 2.8 is the version of python I have installed. In package manager it only goes back to v2.2.
How I can get around this error?
Running Ubuntu 9.1 karmic Koala.
I'm using ubuntu 8.10 which is already installed. Recently I have downloaded ISO file of ubuntu 10.04. Is there any way to install that ISO file i've downloaded without writing the ISO file in a CD?
View 4 Replies View Relatedafter the netinst finished to download the last package, one hour later the process never continues, I checked the log file and I didn't find anything suspecious, also dmesg and nothing, in fact, in the log file before checked I found that the last line was registered just a minute ago - DHCP renew IP-, so my questions are:
1. all the packages downloaded are gone?, can I restart the installation using all those packages downloaded?
2. where I can find the error or problem that cause that the installation was freezed?
3. in the case that installation needs to start from the beginning, can I use the package downloaded?
I am trying to install a brand new installation of Opensuse 11.3 on a PC. I am using the Gnome desktop. When installing I get SO many errors saying "YAST2: package "xxx" could not be downloaded" or "installation of package "xxx.rpm failed." Ignore, Abort Retry.
I ran a checksum on the iso I downloaded from this site and it checks out. What is going on?
I have downloaded Thunderbird 3.1.1 package thunderbird-3.1.1.tar.bz2 . I don't know how to install it. My Ubuntu is 10.04.
View 3 Replies View Relatedwe need to install R on a new server. When we go to compile R it goes through the checks and finds GCC but fails looking for F77. What is the suggested Fortran package with the latest GCC?
View 1 Replies View RelatedI tried to install RealPlayer using a package from the RealPlayer website but I cannot remove in now. I got the following eeror message:
Loading repository data...
Reading installed packages...
Resolving package dependencies..
I am using ubuntu 10.10. Recently I install a package named astah-community_6.3_all.deb. But It took very long time to complete installation. No error message display.So I canceled it. After that,I cann't install or remove any software.I show the following error.
Code:
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. So I try command 'dpkg --configure -a'. After doing so, when I install or remove any package it show the following error.
Code:
E: The package astah-community needs to be reinstalled, but I can't find an archive for it. If I tried to remove it, it show the following error
Code:
installArchives() failed: dpkg: error processing astah-community (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
[code]....
I faced on these days a very nasty problem, during the upgrading of my system... something bad happened and I can not remove, purge, install, reinstall the package flashplugin-nonfree no matter what tries I did till now. To see my tries please read bellow.Do any of you have any advanced advice how can solve this BIG problem that occurs to me?
View 10 Replies View RelatedSince the Fedoraplus site is down, I alternatively downloaded the FC14 version in hopes that it would work. Instead, I now receive the following error any time I try to remove or install a package via yum:
Code:
[Errno 22] invalid mode ('w') or filename: '//var/lib/yum/rpmdb-indexes/conflicts.tmp'
I'm pretty sure the issue here is a typo in a file (the extra "/" in the path to "conflicts.tmp").
I faced on these days a very nasty problem, during the upgrading of my system... something bad happened and I can not remove, purge, install, reinstall the package flashplugin-nonfree no matter what tries I did till now.
root@intra-micro:/home/mikek# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I download packages (nautilus or squash) for photo bulk resizing, and voil�! I can't find where they end up!
View 9 Replies View Relatedhow to check what my latest installed drivers are and how to install the latest? If I search for Nvidia in YaST then noting comes up. I beleive the latest drivers from Nvidia are 195.xxx
View 7 Replies View RelatedI have downloaded the package Sauerbraten (game) partially through Software centre(Ubuntu 10.04). Now I don't want to install it. how to delete that partially downloaded package? It is wasting too much space....It is located in /var/cache/apt/archives/partial/ I tried to delete them manually but it didnt work...
View 7 Replies View RelatedIs there a plug-in package that can be downloaded instead of doing each one, one at a time?
View 2 Replies View RelatedI added a code into terminal and restarted, then I tried to install Java and this came up.'There seems to be a programming error in aptdaemon. This is the software that allows you to install/remove software and to perform other package management related tasks.'
PHP Code:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 961, in simulate
[code]....
I am a newbie to Ubuntu. I have installed Ubuntu STudio 10.04 Lucid, and to install Open Office, I have chosen the below method:
1. Went to System-->Administration-->Synaptic Package manager.
2. Here, I chose Open Office Package and marked something, which I now dont remember.
3. Download of the associated packages have been completed, but it is not installed. Around 99 mb is downloaded, but I am not sure where it is saved.
The problem is that, it is not yet installed. After the download, it behaved like it was installing, I waited, but of no use. How to install the same and where the downloaded packages sit in the system?
I've downloaded and installed ATP for Ubuntu 11.4 on an internet enabled computer. Now i want to use it on a computer which has no way to connect to internet. How am i going to do that.
View 5 Replies View RelatedI have a dual-boot system with XP and Fedora. I had to reinstall XP a while ago. After XP reinstallation, to regain access to Fedora, I ran Fedora installation DVD. It told me that the hdd had a "loop file system" and that I had to reinitialize it. I chose "ignore", "upgrade" and then "Create new boot loader configuration". Everything works fine now, but when I tried to install F11 from a live cd I discovered that I couldn't. It can't edit the lvm part (nor delete it). The only things possible are to reintall F10 with the DVD that created the lvm in the first place or install F11 using preupgrade (the lvm remains ext3 so preupgrade can't edit it either).
My question is: how can I get rid of the lvm part without reinitializing the hdd (I don't want to lose the data on the other partitions). I want to reinstall Fedora but without lvm.I heard something about "fdisk" and "lvremove", but I have no idea how to use these, so I would like a detailed solution (something close to a tutorial).
Interested in trialing Varkon and used Synaptic Package Manager to download and install. According to the [url]...nstalling.html it should be there under 'Applications'. I've looked through them all and no sign of Varkon. I've also tried to see if Varkon was installed so I looked via Ubuntu Software Center under installed software. No sign. Did a file search for Varkon.
View 4 Replies View RelatedI installed Ubuntu in a dual-boot with Windows 7, and installed the bootloader (GRUB? However, I have some weird Windows XP Embedded entry! I also have a lot of different boot options for Ubuntu. All I want is my Windows 7 entry (picked up as Windows Vista) and my main Ubuntu entry. How can I edit the bootloader entries (remove some existing ones, not adding any) so I have only two on there?
View 4 Replies View RelatedI use the command
Code:
dpkg -l
to see all the packages installed in my Ubuntu. The question is that I want to uninstall the latest package but there's no date in the package list made by the command "dpkg -l". so how can I do that?
I'm just curious if this link:[URL}which downloads it in tar form has the most recent version of dvb-apps.I recently noticed a sudo apt-get install dvb-apps option, and from what it sounds like, it's a much older version. Can anybody confirm this?The other thing though is when I successfully install the tar package, why if I try sudo apt-get install dvb-apps is it wanting to install it, as if the tar was never installed?
View 1 Replies View RelatedThe latest kernel(2.6.32.9-67) is causing problems for my laptop.What are the best practices for safely removing a kernel?( Yum wants to remove gcc and friends also...)How can one prevent Software Update from relisting the bad boy?
View 6 Replies View RelatedI'm trying to install Eclipse from synaptic but it only has version 3.2 while there's a version 3.5 out there. How do I get synaptic to provide the latest versions of anything?
View 6 Replies View Relatedi gotta install ubuntu on 5-6 machines , The latest iso image does not offer me package upgarde (the one you get after apt-get update and dist-upgrade) . its about 300 Mb which would be a pain for downloading on different machines.. Is there a way to slip these into the iso image.
View 4 Replies View RelatedIs there a flag for the cvs command to check the latest tag of a certain package
View 1 Replies View RelatedI have fedora versions
2.6.30.5-43.fc11.x68_64
2.6.29.6-217.2
2.6.29.4-167
loaded on my system. Version 2.6.30.5-43 hangs after the progress bar completes with messges labeled r8169 about the ehternet link status. Version 2.6.29.6-2317.2 boots just fine. How do I remove version 2.6.30.5-43 from the system?
after looking at this thread [URL]... i found out that my printer is no longer working with the latest CUPS package (in -Current). I tried to delete the printer and re-adding it again with the same driver, but it failed with an error message: Bad device-uri "cnij_usb:/dev/usb/lp0"! I have tried to use the driver provided by Canon or by the automatic detection by CUPS, but it ended with the same results
View 1 Replies View Related