I tried to install RealPlayer using a package from the RealPlayer website but I cannot remove in now. I got the following eeror message:
Loading repository data...
Reading installed packages...
Resolving package dependencies..
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
I am using ubuntu 10.10. Recently I install a package named astah-community_6.3_all.deb. But It took very long time to complete installation. No error message display.So I canceled it. After that,I cann't install or remove any software.I show the following error.
Code:
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. So I try command 'dpkg --configure -a'. After doing so, when I install or remove any package it show the following error.
Code:
E: The package astah-community needs to be reinstalled, but I can't find an archive for it. If I tried to remove it, it show the following error
Code:
installArchives() failed: dpkg: error processing astah-community (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
[code]....
This happened when I tried to update automatically. Tried using zypper too and failed: Code: Subprocess failed. Error: RPM failed: error: package krb5-1.7-6.3.1.x86_64 is not installed.What is wrong here? How do i remove a protected system package?
View 9 Replies View RelatedI faced on these days a very nasty problem, during the upgrading of my system... something bad happened and I can not remove, purge, install, reinstall the package flashplugin-nonfree no matter what tries I did till now. To see my tries please read bellow.Do any of you have any advanced advice how can solve this BIG problem that occurs to me?
View 10 Replies View RelatedSince the Fedoraplus site is down, I alternatively downloaded the FC14 version in hopes that it would work. Instead, I now receive the following error any time I try to remove or install a package via yum:
Code:
[Errno 22] invalid mode ('w') or filename: '//var/lib/yum/rpmdb-indexes/conflicts.tmp'
I'm pretty sure the issue here is a typo in a file (the extra "/" in the path to "conflicts.tmp").
I faced on these days a very nasty problem, during the upgrading of my system... something bad happened and I can not remove, purge, install, reinstall the package flashplugin-nonfree no matter what tries I did till now.
root@intra-micro:/home/mikek# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I want to install latest downloaded package of openssh v 5.6(tar.gz) from original site but not succeed.
steps followed:
1. remove rpm with: rpm -e openssh-ser....rpm
2. extract package, go into directory and run ./configure command
I added a code into terminal and restarted, then I tried to install Java and this came up.'There seems to be a programming error in aptdaemon. This is the software that allows you to install/remove software and to perform other package management related tasks.'
PHP Code:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 961, in simulate
[code]....
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedIm not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies View RelatedI have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
i'm trying to install my updates through install/remove software in gnome opensuse, but when I click apply everything just disappears, can I install them some other way?
View 5 Replies View RelatedI install Mplayer from Install/Remove Software and I can't find it. I reinstall it but without any success.
View 9 Replies View RelatedI started using linux lately and I'm facing a problem every time I try ti install a new .rpm package this massage appear
View 6 Replies View Relatedi have both windows and linux on my laptop (for ease of use for some programs). suddenly i can't log in with windows (it crashes)could you help me to remove the old windows and install new one?
View 2 Replies View RelatedSystem management is locked by the application with pid 9781 (/usr/lib/YaST2/bin/y2base). Close this application before trying again. I get this after I try and open the software update or Yast with opensuse 11.3. After I installed 11.3 it worked fin for the first big update I did. Then I read about programs that I think will help me make the jump from windows, so I open up my software install and this comes up? I have never played with any Linux OS before and am trying to figure it all out. Seem like years of reading and trying.
View 9 Replies View RelatedI started the openSUSE installer from Windows, but I do not want to install SUSE. How do I get back to Vista?Every time I get 'Booting OpenSUSE installer 11.2 (LOCAL)' and it prompts for the SUSE DVD. I tried inserting the DVD and selecting 'Abort' on the first opportunity but I never get to return to Windows
View 9 Replies View RelatedI have installed 11.3 and really hashed it. I am getting no where and cannot find my way around. I tried to install as a partition with Ubuntu and Windows 7. Result. I have lost Both Ubuntu and windows with SUSE 11.3 installed and with YAST2 (as superuser) I cannot install belkin to get an internet connection, cannot instal Ubuntu or any thing else. I get the following;
[/media/Ubuntu 9.10 i386/wubi.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the centraldirectory and zipfile cannot be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of the /media/Ubuntu 9.10 i386/wubi.exe or /media/Ubuntu 9.10 i386/wubi.exe.zip, and cannot find /media/Ubuntu 9.10 i386/wubi.exe.ZIP, period
I think I have not only installed this incorrectly but I have something I don't fully understand.
I would like to reinstall Ubuntu and then if I cannot get on with SUSE
During my last boot something installed itself that is very annoying and I would like to remove it. The upper right side of my desktop has a tab called New Activity and there is a translucent bar across the top. Now when I right click an item on my bottom task bar the menu appears at the very top of the desktop instead of opening just above the icon. This is an improvement? How do I remove this feature?
View 9 Replies View RelatedOriginally I used YAST's Software Packages to download and install ndiswrapper so that I can set up my Netgear wn511TA wireless card to work with GNOME openSUSE 11.2 default (2.6.31.8-0.1-default). I followed the guide in Ndiswrapper - openSUSE. I almost got it then was thrown off course by Network Manager. Now, back to square one. 1. Software Management shows 3 installed packages: ndiswrapper, ndiswrapper-kmp default and ndiswrapper desktop. Which of these should I run in order to install the Windows .INF driver file?
e.g. <ndiswrapper> -i <windriver.inf>
or <ndiswrapper-kmp-default> -i <windriver.inf>
The reason for this is when I modprobe <ndiswrapper(?)>, I got: FATAL: Could not load /lib/modules/2.6.31.8-0.1-default/modules.dep: No such file or directory. /etc/lib/modules is blank but home/user/lib/modules has the default 2.6.31.8-0.1-default module.
I already install mplayer-mt manually from git repository. Now, I want to install gnome-mplayer but it require me to install vanilla mplayer again.
Is there a way to tell that dependency already met ? Or should I just make mplayer-mt package by myself ? (this kinda work in ubuntu)
I am using open suse 11.3 (gnome). Have installed gnome commander and it is asking for gksu to be installed to enable root file function. Have searched Webpin and can only find the 11.2 package which will not install in 11.3.
View 7 Replies View RelatedI have installed opensuse 11.4 64 bit on a dell optiplex 755 with 4 gigs of RAM. Everything seems to be functioning but when I try to install new apps through YAST or zypper, it starts to download the package and it's dependencies, but you see it quickly slow down on the download speed until it gets to nothing, and I get the Abort,Retry prompt. The internet connection is fine. I can install apps from the DVD medium.
View 3 Replies View RelatedWhen I want upgrade and/or install any package from software.opensuse.org I've got error, "Couldn't find XML file" or anything same this.
View 4 Replies View RelatedI am unable to update/install and uninstall software because something locked up on me. I'm using Suse 10.3 When i click on install/remove software or try to use updates I get the following error.
Code:
System management is locked by the application with pid 2970 (/usr/sbin/packagekitd). Close this application before trying again. Rebooting has no effect and i could probably try opening packagekitd, but still unsure of what to do with it if I did.
I am dual booting Windows 7 & Suse 11.2 and want to uninstall Suse. I know how to remove the linux partitions through windows but need help to first remove the Grub bootloader installed through Yast to enable windows to boot from mbr.
View 6 Replies View RelatedWhen one installs an application,it brings in other stuff too as dependencies.
When this application is removed,will zypper remove the dependencies that came with it and are not needed by other installed packages?
Is it possible to check before and after removal?
I know how to go through KDE settings to "hide" a user from the login screen but I want to know where KDM is getting this info from. I've installed OpenSUSE 11.2 x64, configured it the way I like, and now I would like to clone it. Problem is that I logged into my own account while testing FreeNX and now my username shows up on the login screen. I want to remove any information that I logged into this system with an account other than root. I've Googled many times and still have no idea. I currently have two local users, root and user. The rest of my users authenticate and login via LDAP. The name of my LDAP user account is now always displayed on the KDM login screen. I don't want to disable the user list either, I just want to remove my account from the list before I clone the machine.
View 7 Replies View RelatedI have to hide Unix partitions to succeed in installing Linux and the winner is Ubuntu 10.10! I had to remove whole partitions entries. DOS based primary/logical partitions are now called (hd0,msdos1), (hd0,msdos2), etc. And BSD slices would have been (hd0, bsd1) (hd0,bsd2). I guess I saw those names during installation. update-grub failed in three attempts in a row on 2 machines (32 and 64 bit). Everything went fine after I removed the Unix partitions (which are going to be restored by openSUSE legacy Grub)
View 9 Replies View Related