Debian Multimedia :: Setting Correct Screen Resolution With Squeeze
Jun 18, 2011
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found."
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
View 3 Replies
ADVERTISEMENT
Feb 21, 2011
I installed Squeeze with LXDE on my old 600MHz Celeron, 256MB ram computer. But, every time I boot, the screen resolution is wrong. I can set it right with a few clicks of the mouse, but next time I boot up it has reverted to the wrong setting. I found that this problem has been reported on the LXDE forum, but the official response seems to be that it is not their problem.
How do I get the correct setting to stick?
View 7 Replies
View Related
Jan 15, 2016
I'm using two screens where one Is cheep Denver TV screen with DVD player. I have just install Jessie on my PC. Before i had Windows and there was no problems finding correct resolution for this screen. Now Jessie recognize it as Unknown and the maximum resolution I can set is 1024x768 what is way to small even for this screen. At Windows resolution was something over 1200px wide. The worst thing about it is that this resolution stretches the display really ugly. You may think I'm making big deal of nothing but for me it is actually a deal. I'm graphical designer and I need to see display as it is.
View 7 Replies
View Related
Jul 11, 2011
FINALLY got my personal server up and running again after my GPU's fan died. i rigged a new fan/heatsink on it but i can't seem to get the resolution correct. nvidia-settings (version 195.36.31) says 1280x960 but i have to pan around the entire desktop (like having a huge image zoomed in on a small screen).
View 8 Replies
View Related
May 13, 2010
I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
View 6 Replies
View Related
May 3, 2011
I'm trying to change the output resolution of a HTPC that's connected to a 720p plasma from (an auto set) 1024x768 to 1280x720 so that the output is the correct 16:9 ratio for the plasma.The HTPC is running Ubuntu 11.04 with a GeForce 7600GT and is connected via VGA cable to the plasma. The plasma automatically detects the PC input as XGA.
The worst effect of this is 16:9 media (video clips etc) looks really stretched out with the letterbox bars on the top and bottom and icons in general don't look square.Nvidia driver has been activated via Additional Drivers but the message reads;
Quote:
The driver is active but not in use"
Any ideas what that means? Should I be looking for a way to disable whatever the Ubuntu driver is so the proprietry one is in use?Under nVidia Xserver settings I don't have an option for a 1280x720 resolution, the next closest resolution for 16:9 is 1360x768 but then portions of the output are no longer visible on the plasma.Could it be as simple as using the DVI output (not the VGA) from the graphics card to the plasma to get a correct reading of the input. Still, I wouldn't have a setting for 1280x720
View 4 Replies
View Related
Jun 21, 2010
Having been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
# lsmod | grep nvidia
nvidia 9821382 0
i2c_core 12570 2 i2c_piix4,nvidia
PS--This was installed the "debian way" via module assistant.
View 2 Replies
View Related
Mar 10, 2011
I have some experience with Linux (mostly Ubuntu) but absolutely none with Fedora. In fact I have needed to re-install twice just to get to this stage. I now have a fully updated Fedora 14 Gnome desktop. I have (finally) got Nvidia graphics drivers up and running. I can open the Nvidia Settings screen and everything looks ok except that the desktop screen resolution doesn't seem correct. I have a Sony Vaio with default screen resolution of 1920x1200. In Nvidia settings it was set to AUTO, but I've changed that as root user to 1920x1200 with a refresh rate of 60 Hz and rebooted. My desktop looks quite good, but it's not 1920x1200 - maybe 1600x1200? Perhaps. How do I confirm the current resolution?
I have run
Code:
glx info | grep direct
and the output is
Code: direct rendering: Yes
GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Which I presume is ok?
View 5 Replies
View Related
Apr 8, 2011
I just got a DVI cable so I can have a dual monitor setup, (one VGA, one DVI monitor), and when the DVI cable is plugged into our 20" widescreen, the correct resolution (1680 x 1050), a "No Signal" error message will appear on the monitor. When the resolution is lower with the DVI cable, it will show up, but everything will be a bit bold and blurry. When I plug our VGA cable into the VGA slot in this monitor, everything shows up fine.
View 9 Replies
View Related
Mar 14, 2010
Code:
Fedora 12
2.6.32.9-70.fc12.i686
GEFORCE GO 7400
When my notebook boots I get a high screen resolution. However, when I login it seems to go to a lower resolution that is not clear. I think this all started when I updated to a new kernel. So I reinstalled the nvida drivers using leigh's guide. However, I still can't seem to get it to display correctly.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (mockbuild@) Sun Feb 28 14:49:02 EST 2010
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 7 Replies
View Related
Mar 23, 2011
I installed Debian Squeeze from Debian 6.01 CD 1 on my old Pentium 4 Desktop. Now when I log off, the screen gets black and login window is not appearing. I have tried all old post of linux questions forum and also of ubuntu
View 7 Replies
View Related
Dec 22, 2010
I updated my system as usually. Sadly since then my screen flickers every 10 (or so) seconds. It turns black for like 10ms and then back to whatever it showed before. This behavior occurs after some uptime. Haven't measured the flicker-free time span yet but I guess it starts after 15 to 30 minutes.I'm using a up-to-date Squeeze with KDE4 an the nvidia-driver for me GeForceGo. Interesting thing is: It does not flicker while using fluxbox using same xserver.
View 1 Replies
View Related
Feb 14, 2016
I just changed the desktop on my thinkpad from awesome to i3. And now I have some very strange issues with the screen resolution. Because at home I use this x60 thinkpad on a dockingstation and a 19" display. As long as I used Awesome as my Desktop, the display manager as well as the desktop itself could handle the different screen resolution depending on if I'm out with just my 12" on my thinkpad or with the much bigger screen on my home 19" display.
I can understand that i3 maybe cannot handle this alone and I need xrandx to enforce the screen resolution. But why is the display manager (lightdm) also affected by this change? What is so different that even the DM cannot find the proper screen resolution?
View 1 Replies
View Related
Mar 18, 2010
I'm running debian lenny and want to change the screen resolution from 640x480 to 1024x768. I'm using a nVidia Geforce FX 5800 and I installed the additional nvidia drivers with the help of this tutorial [URL]. Here is my xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection .....
When I try to change the screen resolution via the gnome menu I just can choose the 640x480 resolution and 50Hz refresh rate.
View 4 Replies
View Related
Sep 3, 2010
I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[Code].....
View 13 Replies
View Related
Feb 25, 2010
I installed ubuntu onto a desktop computer about a month ago. Everything was working well straight away, I had it outputted onto my TV (32 inch Hi Def Sharpe Aquos). The Graphics card is an NVidia Ge Force FX 5600. On installation and after a restart the computer detected the TV and actually gave the name of the TV in the settings automatically, in the system --> Administration Menu there is a programme that sets the resolution and settings for the NVidia card. This all sorted itself automatically and displayed in 1360 x 768 which was perfect on my TV. For some reason when I turned it on this morning it will only display in 640 x 480 or 320 x 240. xrandr only gives minimum of 320 x 240 and maximum as 640 x 480. How to rectify this?
View 3 Replies
View Related
May 29, 2010
I've just bought a new monitor - Viewsonic VA2213w and am trying to set it up with Lucid. The resolution required is 1920x1080 @ 60Hz. I have an NVidia GTS250 with the proprietary driver v195.36.24 installed. I can set the right resolution in the nvidia-settings app, but it will not survive a restart. X always reverts to 1024x768. I have manually edited xorg.conf now to try to force the mode. The GDM login screen displays at the correct resolution, but on logging in X changes the resolution. Xorg.0.log shows the resolution being correctly set to 1920x1080 initially, then right at the end for some reason it is reset to 1024x768.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Thu Apr 22 11:45:35 PDT 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection .....
View 1 Replies
View Related
Mar 25, 2011
I just installed 64 bit Debian 6 (Squeeze), and the O/S will not identify my monitor or allow me to set screen resolutions higher than 800 X 600.
I had the same problem in Debian 5, and remedied it by editing the xorg.conf file in the X11 folder in the /etc subdirectory. Worked like a charm.
Debian 6, however, has no such conf. file, and the Debian installation notes at Debian Wiki says Debian no longer uses Xorg as a video driver.
I am, therefore, completely lost.
View 15 Replies
View Related
Feb 16, 2011
I have ATI Radeon 9550
"lspci -v | grep VGA
02:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550] (prog-if 00 [VGA controller])"
using free driver. Everything is working fine but movie playing. In Totem Movie Player I got full screen but playing is like slow motion, and in SMPlayer I can't get full screen. Window is in full screen but movie is not...
View 6 Replies
View Related
May 4, 2010
Excited at seeing the new features in 10.04, I clicked the Upgrade button tonight. I am now really regretting it! Problems:
1. My screen resolution should be 1280x1024 but the System>Preferences>Monitors control panel only shows 1024x768.
I think I have onboard Realtek graphics. Do I need to install proprietary drivers? Everything worked fine out of the box with 9.10!
2. The sound isn't working. Again I think I have onboard Realtek sound, and again it used to work fine without any intervention from me...
3. Although on first startup wireless networking was working fine, I restarted to see if that would solve the display issue, and wireless networking stopped working too!
I have an RaLink wireless card.
When I used Grub to choose 2.6.31.20, I got some error messages at startup (e.g. mount couldn't mount /dev), but then it did eventually start up and the sound and wireless networking are working again. But the resolution is still not fixed. It is now offering 1152x864, which it didn't previously, but no 1280x1024 (my screen's native resolution).
View 9 Replies
View Related
Nov 1, 2010
I recently built a new computer and moved over my old graphics card, a nVidia GTX 275. Everything appeared to work fine, it booted with no drama etc.
I use my computer for work and gaming, all my work, web browsing, chat etc happens on Debian. I play games on Windows 7.I did a fresh Debian install on this box and everything went smoothly until starting xdm for the first time, it wouldn't go to a higher resolution than 640x480. I'd already installed the proprietary nVidia drivers and they appeared to be working fine, just at the wrong resolution.
View 3 Replies
View Related
Feb 3, 2016
How to enable native screen resolution in X using VESA driver? I have IBM/Lenovo ThinkPad T61 with a native screen resolution of 1680x1050, but I am getting 1024x768 instead.
This is a fresh install of Debian 8.3 (latest stable) (Jessie).
The root cause of this is that nouveau graphics driver (which I was using before) was causing me kernel crashes. Full story here: [URL] .....
View 7 Replies
View Related
Mar 24, 2010
I recently got a computer and installed the ubuntu 10.04 beta on it. I'm having issues getting my monitor to display at the correct resolution. It should be displaying at 1440x900, but the highest resolution I can select from the displays configuration panel is 1366x768, which is not even the correct aspect ratio.
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
This is the whole thing, in case it helps.
From what I have read, this is a brand new chipset with the GPU built into the main CPU, as if it were another CPU core. Is there a driver for this yet, or do I have to deal with an improper resolution?
View 1 Replies
View Related
Jul 26, 2015
Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
  1024x768   61.00*
  800x600    61.00Â
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [Â Â 15.510099] nouveau ![Â DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510148] nouveau E[Â DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510191] nouveau E[Â Â Â DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
View 3 Replies
View Related
Jul 13, 2015
I am wanting to try to change my normal user (bbq) to a different screen size within my secondary user (lfs). I was wondering how one would do that.
This happened when OpenClonk changed my screen resolution and when i changed it back my screen blacked out (and me being the idiot save it).
Debian 8 GNOME
Also (a bit unrelated) could a video card problem cause a user to log out? I have been having some severe problems with my monitor and I am thinking it is th video card. Sometimes when I am starting a program my monitor will lose connection to my computer (HDMI signal not found) and I will either have to wait a few seconds and it will turn on or it will just stay blacked out.
View 0 Replies
View Related
Apr 18, 2011
I am running Debian on a g3 mac and when I set the screen resolution to 1024 by 768 I cannot see everything, for instance the scroll bar on iceweasal is hidden, so I switched the resolution to 800 by 600 and then i load up evolution and find that the forward button isn't visible, is there a way to get a custom resolution that works with everything
View 10 Replies
View Related
Sep 3, 2015
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
View 4 Replies
View Related
Nov 10, 2010
I just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 +
1152x864 75.0
1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
View 9 Replies
View Related
Jun 20, 2010
Monitor: Asus VH242H
Graphics: XGI Volari Z9s
The native resolution of my monitor is 1920x1080. I can't get Ubuntu 10.04 to display at this resolution. Current xorg.conf (relevant sections):
[Code]....
I was able to get the terminals to run at 1920x1080 by adding Code: video=sisfb:mode:1920x1080x32,rate:70,mem:4096 to my grub command. That's nice, but I really want Xorg running at that resolution, and it didn't. I've been working on this for hours, through dozens of gdm restarts with every variation of the above I can think of.?
View 1 Replies
View Related
Mar 18, 2011
I have ubuntu 10.10 installed on my computer in dual boot with windows 7, but i am using a 27-inches Samsung screen through an hdmi cable to connect my computer. whenever i try getting on ubuntu, i cannot see the top and bottom of the desktop (so i cant access the menu bar or anything!)(while using my spare vga cable) i tried downloading the nvidia driver & utility for my video card (gtx 460), but even using that, i could not setup my screen resolution manually. When i setup my windows, i was able to manually setup a custom resolution (i.e. 1842x1026) through the nvidia utility to be able to get the screen the fit properly.
I was wondering if there is any way i could do the same for ubuntu, perhaps through terminal.
View 6 Replies
View Related
