Debian Installation :: Squeeze - Machine Flashes Fonts And Screen Blips
Aug 15, 2011
I have been using Debian for three or so years now. Not sure what all the difference it makes, but I'm installing Debian Squeeze on a Sony Vaio desktop computer... With an nVidia GeForce 5200 which works perfectly in other computers and on the same computer when dual booting with Windows XP. I've tried and installed several times already to no avail. When I fresh install just the standard system, no graphic desktop, no Xorg, no servers, no nothing, just the standard system, command line only. When I do the initial boot on this blessed computer, part way through the boot process my monitor shuts off and it says frequency out of range (thats a message from the monitor itself, not the computer or debian).
The same install process I've executed countless times. I thought it was a dependency issue, problem with X perhaps. I can install lenny, but not squeeze. When booting in single user mode, it seems like it craps out either during or right after it loads or does something with the "drm" - you know how during the boot script, the machine "flashes" the fonts and the screen blips... its seems to me like that's where its happening at. The monitor works just fine, I really don't think that's the problem. But it is frustrating and I have no clue where to go about finding what the issue is if I can't see whats going on.
View 9 Replies
ADVERTISEMENT
Apr 3, 2011
I've installed Squeeze. I saved a .fonts.conf file that helped to improve fonts some. I would like to know what others do to improve fonts. I found the fonts sometimes a little thin. I've heard of compiling freetype with bytecode interpreter enabled. Is this necessary on Squeeze? If this would make an improvement what would I need to do?
View 5 Replies
View Related
Feb 26, 2011
I'm a black screen guy, so i dont give to much to appearance, i always do a minimal debian install and build from this with openbox...but this time i get to test xfce and damn indeed has good looking, i just went to xfce4-settings-manager put as full and rgb and voila...good looking. Patched libcairo and better still.Back to Openbox i cant achieve the same result..no matter what i do, tried fonts.conf but in xfce just looks better....Any tut to appearance in Openbox.....what fonts do you install.
View 2 Replies
View Related
May 2, 2011
I have a Dell Inspiron 5150 which I first upgraded 'over-the-air' to Narwhal. This completed with no errors. After reboot, the screen momentarily displays some icons before reverting to the background - this loops round every few seconds.I've subsequently tried installing with the CD which runs through with no errors, but does the same thing when it's finished - blink... blink... blink...
View 2 Replies
View Related
Mar 3, 2010
I was running Fedora 10 I belive- no issues - did an update to 12 via DVD and now the screen continuously flashes... I see posts about Nvidia issues - but this laptop uses ATI based on HP's website.
View 6 Replies
View Related
Nov 3, 2010
I installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?
View 1 Replies
View Related
Jul 6, 2010
My laptop is Toshiba Portege 2000. Every time after I installed new ubuntu release, I have to replace the xorg.conf to fix the resolution problem b/c I got 800 x 600 screen only. However, after the 10.04 installation. I only got 1/2 of the screen of resolution. I cannot even see most of my terminal screen.
View 2 Replies
View Related
Jun 2, 2011
I installed Debian squeeze on my old Dell Latitude C600 laptop. I Installed it from a cd that worked to a friend of mine. I finished the installation successfully. After booting the computer I can get to the grub screen and after choosing the OS (Debian GNU/LINUX, with linx 2.6.32-5-686) I see the computer loading and running command lines, but after few lines, I get black screen and I hear the computer "working" but can't see anything and it doesn't react to anything that I do.
View 9 Replies
View Related
Jun 13, 2011
I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies
View Related
Jun 26, 2011
I don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
View 4 Replies
View Related
Jan 1, 2011
I have been running Ubuntu 9.04 for the past year. Tonight decided to upgrade to 9.10 thru update manager. Every thing regarding the install seemed fine until the request to restart the computer. I hit the restart and it will not boot up. Computer goes thru the normal restart screens.
Screen flashes with bios info--no hard drive detected, then proceeds to show booting from hd, then loads grub stage 1.5 (not grub 2)and screen goes blank.
View 6 Replies
View Related
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
Aug 2, 2011
The story was starting newbie named cassamovefall installing graphic driver for his new Debian Squeeze. Here his uname -r : 2.6.38-bpo.2-686-bigmem He use Dell N4110 notebook, with specs : Core I5-2410M & Dual Graphics ( Intel HD 3000 & ATI Radeon HD 6630M with codename TURKS )
[Code]...
He had tried kinds driver to install it; from fglrx, ati, radeon & radeonhd ; and also with kind ways. But they are gave same result, when login screen should appear, but it didn't. It's just showed blank black screen with blinking '_' (underscore) at top left. This is his Xorg.0.log when using radeon driver, via recovery-mode (text based) :
[Code]....
View 2 Replies
View Related
Jan 7, 2011
i have debian lenny installed, download the debian-507-i386-netinst.iso and installed with the VirtualBox virtual machine, the network is working, when i run the apt-get update downloading the cache:
View 1 Replies
View Related
May 21, 2010
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
View 2 Replies
View Related
Jul 25, 2011
I got a new dsl modem/router today and now for some reason I can't login into an ssh session using putty and windows using the hostname of the debian box. I can login using the ip though. Also, it seems I can still access the debian box via samba/windows explorer using the host name.
View 3 Replies
View Related
Jul 27, 2010
This is my sons Asus eee pc 1005peb ( have one exactly like it and never happened to me)
The screen flashes on bootup and makes it very hard if not impossible to login and the gnome menu at the top is gone too. I do not know what he did to it. But I am loading meego on it now.
View 9 Replies
View Related
Feb 27, 2010
I have been using Ubuntu for a while with no real issues. I have tried to do a fresh install of Kubutu but I cannot install it due to the fonts on the installation process being tiny. I am using a HDTV as my monitor so could this be the problem?? I have no other monitor to utilize so where do I go from here?
View 1 Replies
View Related
Jan 10, 2010
my screen flashes when I load anything. am I frying my vid card?
View 2 Replies
View Related
Aug 29, 2010
When I load Ubuntu, it goes to the desktop screen, shows my desktop picture, loads Pidgin which I have set to start on startup, loads Icons, and then the screen goes black. The mouse cursor shows up, I can move it around, and then it goes black again, and the mouse cursor shows up again. This repeats a few times until the cursor freezes. This started happening after I tried fixing a bug with new drivers for my Intel 845gl video card. The instructions I followed are these:
Code:
To use the available fix, run the following commands:
pt-add-repository ppa:glasen/855gm-fix
apt-add-repository ppa:brian-rogers/graphics-fixes
apt-add-repository ppa:glasen/intel-driver
aptitude update
aptitude install linux 855gm-fix-dkms
aptitude dist-upgrade
,taken from here.
I have tried some of the options in recovery mode from GRUB menu, none really work, except booting with default graphic configuration, or something similar like this.
View 5 Replies
View Related
Mar 16, 2010
I am trying to play some .avi files and they open and run, but only the sound works properly. The video screen will flash about every 4-5 seconds.
I've tried Totem and Gnome MPlayer and both play these files the same.
View 2 Replies
View Related
Oct 14, 2010
Whenever I try to change desktop effects to anything other than none, a window appears saying 'Searching for driver' then the screen flashes and it says effects could not be enabled. Here's the output from System Testing Compiz test: Gathering information about your system. Distribution: Ubuntu 10.10 Desktop environment: GNOME Graphics chip: ATI Technologies Inc M96 [Mobility Radeon HD 4650] Driver in use: fglrx Rendering method: None Checking if it's possible to run Compiz on your system. [SKIP] Checking for hardware/setup problems [SKIP] At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia).
View 2 Replies
View Related
Sep 29, 2009
I upgraded from fedora 6 to fc10 using a net-inst iso. Everything went great however when I rebooted gnome wouldn't start up and there were other error messages, however thats not my current question. I figured id login as root, I put my pw in and the screen briefly flashes and then back to login prompt. The flash is a message saying something about no shell. Same occurs when trying to logon to my main user account. I can boot to single user and see that all my partitions are there and the data is there. My password file has the shell at the end of the entries.
View 1 Replies
View Related
Mar 23, 2011
I installed Debian Squeeze from Debian 6.01 CD 1 on my old Pentium 4 Desktop. Now when I log off, the screen gets black and login window is not appearing. I have tried all old post of linux questions forum and also of ubuntu
View 7 Replies
View Related
Jul 17, 2010
I just installed Squeeze because Lenny didn't have the best Bluetooth support. (Just installed blueman and everything I have works without any configuring, by the way). In Lenny, gdmsetup would allow me to choose a theme for the login screen as well as change settings for logging in. With Squeeze, fully updated, I only get a couple simple options for changing automatic login (screen shot of gdmsetup).
There is a config file that I found: Code: /etc/gdm3/greeter.gconf-defaults It is a simple config file but I do not know the available themes and cannot preview them.
View 5 Replies
View Related
Dec 15, 2010
After entering runlevel 2 and gdm loads, I only get a black screen. I hear a beep that indicates gdm has loaded, but everything stays black. Trying to switch to a console using ctrl-alt-f1 does absolutely nothing.
At one point, I disabled gdm from starting in runlevel 2, and rebooted. I then typed into tty2 "sleep 60 ; reboot" and in tty1 "gdm" and hoped for a reboot if the graphical login didn't appear. No reboot occurred, my black screen remained.
I've issued acpi=off at kernel command line (from grub) and disabled all acpi services. That seemed to work for a few hours but now I get the black screen again every time. There's no option in the BIOS to switch from acpi to apm, so I've done all I can do on the software side of things.
[Code]...
View 3 Replies
View Related
Aug 22, 2010
I just installed Ubuntu 10.04 on an old Compaq desktop, and after working on it for a while, screen randomly turns blank, usually with flashing horizontal white lines. Can anyone help? Someone already told me to try memtest, which I already performed, but nothing happened.
View 9 Replies
View Related
May 14, 2010
Ubuntu 9.04 works fine, I have just installed Ubuntu 10.04 Lucid Lynx without problems, it runs fine but after a while the screen starts flashing and the only way out is to reboot with ctrl-alt-del. First of all I get a pale purple screen with blocks of random colour in the middle then it goes on to flashing between two screens. In one the top half of the screen is vertical black and white stripes and the bottom half is black, in the other it is a terminal screen with this distributed across it:
Starting common Unix printing system cupsed
Pulse Audio configured for per-user-sessions
Enabling additional executable binary formats binfmt support
Checking battery state
On the latest occasion the text was "could not write bytes: Broken pipe" repeated all over the screen, followed by "checking battery state".
View 7 Replies
View Related
May 2, 2009
I have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
View 8 Replies
View Related
Aug 11, 2010
After doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
View 3 Replies
View Related
