I am using ubuntu 10.04. I installed inetutils-inetd,rsh-server & rsh-client. Created user "user1".disabled firewall using the command $ sudo ufw disable
$ su user1
$ cd ~
$ vi .rhosts
Entered ip address of another host and saved
$ chmod 600 .rhosts
[Code]...
When I issued 'tail -f /var/log/messages', I got no messages. do I have to disable any other services to do this work.
I installed Ubuntu a few months ago on my Dell inspiron 1318. All works really well, however my only only problem with the setup is the boot selection screen. Is there a way to put Vindoz in the first spot instead of Ubuntu? I use them about 50-50 of the time but would still prefer windows as default because my wife uses that with her accounting software and she goes nuts when she turns it on and it goes to Linux.
View 3 Replies View Relatedmy windows key on the keyboard is lying idle. can i do something about it? erm...use it to open the GNOME menu?
how to do it, i mean implement the shortcut.
when i try to copy this script to the cgi folder, i get an error
casper@casper-laptop:~$ cp /home/casper/hello.cgi /usr/lib/cgi-bin
cp: cannot create regular file `/usr/lib/cgi-bin/hello.cgi': Permission denied
casper@casper-laptop:~$
#!/usr/local/bin/perl
# hello.pl -- my first perl script!
print "Content-type: text/html
";
print <<"EOF";
[Code]....
i am running apache on ubuntu ibex - is there something that i have to setup to run cgi scripts on ubuntu? it runs ok from the command line - but i want to open it up in a web browser.
I installed Ubuntu 10.10on a Compaq via USB. Everything works fine except NO INTERNET. Even a simple LAN connection is not rcognized. What needs to be done?
View 2 Replies View RelatedI've just been given a Microsoft Wireless Media Desktop 1000 keyboard and I'm trying to configure it for ubuntu. Unfortunately I can't find any preinstalled keyboard layouts that work and can't find any software that assists in such a task.
View 1 Replies View RelatedI am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals:It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether).I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be.
So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if:A) the card is working as it shouldB) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next)
I am experiencing trouble configuring suPHP on my Ubuntu 8.04 web server. I've googled around quite a bit and the general consensus is that you first disable php5, then install the suphp module (I did that from the repo). I configured one of my Vhosts to use suPHP_UserGroup, but I get the following error:
Invalid command 'suPHP_UserGroup', perhaps misspelled or defined by a module not included in the server configuration
I know the module is loaded, so I'm not sure why I'm getting this error. Is a Vhost the right place for this setting? Note that I installed from the repository instead of compiling from source if that makes any difference. Any insight on this issue? I can provide configuration files if need be.
Edit: After some extended googling, from what I understand I have to recompile suPHP using the 'paranoid' mode. Am I correct?
I have an Ubuntu 9.10 server that is normally headless, but has a TV-Out that I want to start using. I've installed xorg, but when I test it with either startx or just X, I get the following:
Code:
X: warning; process set to priority -2 instead of requested priority 0
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
[Code].....
I have ubuntu 9,10 and 7 repositorie disks I bought from osdisc.I installed ubuntu next to widows xp 3.I can't seem to connect to the internet or configure my system to do so.My us robotics usb 2.0 modem works great in xp but not at all in ubuntu.Is there someone out there willing to help me step by step?Or in anyway possible.Directions on how to or where to go for help.I'd really like to not be dependent on Microsoft completely. My telephone number is 903-566-3590. My fax is 9035660030. My address is 12862 Sandy Point Drive Tyler, TX 75707
View 1 Replies View RelatedI'm new to Ubuntu and installed Apache, Tomcat and PHP using separate packages. All work well but it seems that the default doc root for Apache and PHP are in different places as:The following command to start Apache: sudo /usr/local/apache2/bin/apachectl start brings me to the "Test Page for Apache Install" and shows the Apache logo--successful--when I hit URl....Also, could someone please tell me how to stop PHP from starting Apache on boot?
View 5 Replies View RelatedI am using Ubuntu 9.10. I just got a Linksys WRH54G wireless router. I want to protect my wireless connection by putting a password to it but when I enter the Router's default IP address (192.168.1.1) into my browser to open the 'Utility Welcome screen', the browser does not respond.
According to the Router's manual this is because PC' TCP-IP is not set to automatically obtain the IP address.
I would like the calender to boot come on the screen with only the month ctrl 3 and the contact/control panel on the left.
I do not want the Event or Task areas to show. I don't use them that much and there are buttons to call them if I do need to make notes.
I only want the numbered squares and buttons/icons to be displayed.
I've dug here:
/home/dave/.gconf/apps/evolution/calendar/display/%gconf.xml
.evolution/calendar/local/system/calendar.ics
/home/dave/.gconf/apps/evolution/calendar/%gconf.xml
I would like this to be a permanent feature when I call it from my task tray.
I recently bought a dell inspiron 14 n4010 and i've installed windows and Ubuntu 10.04 in it. The problem is that i'm not able to access internet in my ubuntu. I'm using asianet broadband connection and i'm able to get internet in my desktop when i connect the cable to the system. But when i did the same with ubuntu 10.04 in my laptop, i'm not able to get internet access. I'm able to access internet in windows though. But i hate using windows.
View 9 Replies View RelatedJust purchased and installed an ATI Radeon HD 5450 graphics card and installed the proprietary drivers via System > Administration > Hardware Drivers. After rebooting the machine X would not load so I restarted into recovery and removed my xorg.conf. At this point I could restart normally and the machine would let me into X. I went to System > Preferences > ATI Catalyst Control Center to try and configure the card.
I receive the following message:
There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI Driver is not functioning properly. Please install the ATI driver appropriate for your ATI hardware, or configure using aticonfig.
So, I did just that, I restored my backup xorg.conf (configured for nvidia card) and executed 'sudo aticonfig --initial', it made the proper changes and additions to the configuration file and this is what it looks like [view xorg.conf]. I then restarted the machine and X still refuses to begin [view Xorg.0.log]. Again, I went in removed the xorg.conf file and the machine will load normally. I tried running fglrxinfo to try and see if the card was properly installed and it just threw a segmentation fault.
configuring RAID, LVM and my physical volumes for a new 10.04 Server install (used mostly as a windows file server and print server). My hardware setup consists of 2 identical 500GB hard drives. My desired end state is:
An ext4 root partition (20 GB)
A swap partition (2GB)
A fat32 partition (450 GB) (to be accessed via Samba)
The above all to be on RAID1 across the 2 disks
The way I see it, the there are a number of possible ways to configure the above, and I am looking for some advice on the best (feasible) option: Create a single MD0 raid volume accross the entire two disks, and then create a single LVG across this, with 3 sepreate LVs, on for each partition above Create 2 physical volumes on each disk, create two raid volume on these (MD0, MD1), one for the LVG with two LVs for the Root and swap, a the other for the FAT32 partition (this seems like more work?) Other more suitable options?
i have to different routers in my home. One is at&t dsl modem other is dlink wireless n router.
I have my ubuntu server connected to my att modem as this is the only way I can get it to work. As I can only connect to my server from the outside of my home.
Problem is my desktop and laptops use the dlink because its faster and giver me more bandwidth so everything in my home is wirelessly connected to it.
I use ubuntu as web server, proxy server, and dns server. I have all my computers useing the proxy server my just inputting my proxy address as 192.168.1.0 which is my ubuntu address. But my computers use 192.168.0.0 as this is how dlink is setup.
So anyone know how I can get all my pc's on the network 192.168.0.0 to connected to my samba server which is on 192.168.1.0? Can I setup my dlink dir-615 as a access point? So that it shows up in the 192.168.1.0 network. Or can i configure my pc's to look into the 192.168.1.0 network to see the samba server?
i'm having a problem trying to configure the network side of an HP color laserjet 2605dn. It's plugged into my router, but i don't know how to find the dang thing from my laptop.I got a configuration sheet printed out with tcp/ip settings, but it's all greek to me.I had it set up on another computer and was able to print from my laptop, but i don't want to turn on the desktop and have to login everytime.
View 9 Replies View RelatedI have no idea what makes my terminal look like this when I install and configure any package Terminal.png
When should work and look like terminal2.png
How do I get it to work properly?
I have a laptop with an "ATI Technologies Inc Mobility Radeon HD 3400 Series" video device. I have trouble configuring the second VGA monitor attached to the laptop to 1024x768 resolution. It is always stuck on 2560x800. My xorg.conf file is as follows:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
Option "DefaultServerLayout" "dualscreen"
EndSection
[Code]...
way of life and am having trouble accessing the internet.
View 6 Replies View RelatedI've been running into some difficulty configuring my college email acocunt to Evolution. It should be simple, as that I actually log into Live.com to get to it.
View 1 Replies View RelatedHave any detail configuring RSyslog on ubuntu 10.04? with web interface view
View 2 Replies View RelatedI've been using CentOS for quite a long time, and I've recently switched to Ubuntu 10.10 as a desktop. I'm having one small stumbling block, I can't seem to setup LDAP authentication via a GUI. I found this post here.
[URL]
Is there a GUI application that allows LDAP configuration similar to the Cent OS one?
i am too new for linux..I installed Ubuntu 10.10 desktop edition from windows.When i am trying to configure network connections i am facing problems
Code:
udo pppoeconf
no working ethernet card could be found.If you do have an interface card which was not autodetected so far,you probably wish to load the driver manually using the modconf utility.Run modconf now?
/usr/sbin/pppoeconf: 523: modconf: not found Ifconfig
[Code]...
I've been trying for an hour now to try and configuremy e0mail with 'Evolution' and it's just not happeningI have a LIVE accountemailhere@LIVE.CO.UKAnd I know the incoming and outgoing address's I believeI have on both a SLL Encryption.P.s This forum has been the BEST assistance with my problems since I have gotten Ubuntu
View 1 Replies View RelatedI have 2 pc's at home, neither v flashy but both more than capable of running this. Previously I had them both running XP SP2. One pc has 2 NICs in it and the second only one. So, PC1 (now running Ubuntu desktop 10.04) has the 2 NICs installed ...
1) A realtek NIC which is on 'eth1' and from which I receive internet connectivity from the router of this shared house. (2 other people connect their PCs to the internet via this router.)
2) A 3com NIC on 'eth0' which I have connected (using a crossover cable) to the Intel 'PRO100 VM' NIC on PC2.
Admittedly this took me some time to get half working. Currently I can connect to the internet through 'eth1' OR to PC2 via 'eth0' BUT NOT AT THE SAME TIME. However, If I disconnect one (by left clicking on 'disconnect' under the top of screen menu bar, then the other one will immediately work ... and visa versa.
I had this working when both PC's were running windows XP but now in trying to educate myself further I have installed Ubuntu on PC1 and am attempting the same thing. I refuse to accept that as alot of these thread responses state, that it 'can't be done'. Quite clearly it can be done since the physical connections and hardware are no different, its just about ensuring that the protocols are all correct and that I haven't done something stupid.
I am very keen to learn more about computer networks and equally keen to educate myself in the ways of Linux, in fact I am studying to gain a network qualification as we speak but at this stage its still a little confusing. I have learned an awful lot about the fundamentals of networking but the 'hands on stuff' is where I really need to test myself.
how to do surfing in ubuntu linux. Recently i took the new broadband internet connection, so i would like to configure and set the ip address in ubuntu linux, moreover i am able to connect to internet automatically in windows XP , here the ip address is configuring automatically. but when i started the ubuntu server, my ip address is not configuring automatically , i am unable to connect to internet in ubuntu server , which i have tested in specific firefox browser , saying that network was diconnnected, however i am able to see the network notification icon which has been displayed in top of the address bar , showing that ( X ) network disconnected.
how to get resolove this issue. and same way how to set and configure ip address in ubuntu server , so i should be able to do surfing in ubuntu linux. note : i think here broadband type connection is DHCP....
I'm using ubuntu 9.10 64bit and I'want to configure php mysql and lampp. Also the package mysql-ser is already installed, so if I install MYSQL GUI tools(Administrator, query browser..) from my synaptic package manager will it detect the mysql already installed ? Also tried configuring lampp by extracting it in my /opt directory and i started the server, which MySQL ll it detect the one which was previously installed otr the oin that in gui tools ?
Also think the current ubuntu repository does't have latest build of mysql GUI tools, so how the above mentioned things ll change if I try to download the individual package.
Oveall what I want is to configure Mysql GUI tools, Mysql workbench, xampp and php(For this I'm using Bluefish and Komposer). Please help me out so that I can leave windows for my Web-projects.
When I upgraded my system for the first time, I got a message asking me to decide between a few menu items for configuring grub-pc. When I chose to keep the current version installed, GRUB booted to a CLI. What menu item should I choose?
View 1 Replies View Related