i'm having a problem trying to configure the network side of an HP color laserjet 2605dn. It's plugged into my router, but i don't know how to find the dang thing from my laptop.I got a configuration sheet printed out with tcp/ip settings, but it's all greek to me.I had it set up on another computer and was able to print from my laptop, but i don't want to turn on the desktop and have to login everytime.
View 9 RepliesI am using Ubuntu 9.10. I just got a Linksys WRH54G wireless router. I want to protect my wireless connection by putting a password to it but when I enter the Router's default IP address (192.168.1.1) into my browser to open the 'Utility Welcome screen', the browser does not respond.
According to the Router's manual this is because PC' TCP-IP is not set to automatically obtain the IP address.
I use Ubuntu 9.04 Jaunty Jackalope.I have been trying to configure a NETGEAR DGN1000 modem router. my manual says that to access the modem for configuration, I should "Type URL... in the address field of [my] browser, and then click Enter."my browser, though, does not seem to find any such page and so I cannot continue the configuration. btw, we had no problem configuring another computer in the house running on windows vista, so that it looks like the cables are all in place, the modem and the line are ok.
View 1 Replies View Relatedis there a possibility to connect to my router admin zone from internet using wan ip? from lan I can do that using 192.168.x.x IP but when Im in work and something go wrong at home how can I check configuration of my router from outer world instead of lan?
View 7 Replies View RelatedI am trying to configure my ADSL modem/router. According to the manual it should go as this: For the initial connection to the Internet and configuration of your router, you need to connect a computer to the router which is set to automatically get its TCP/IP configuration from the router via DHCP.
View 5 Replies View RelatedI have been happily running the (always latest) version of PolarCloud's Tomato software on my LinkSys WRT54G for about 2 years now. I am looking for a way to setup a Proxy Server on my Tomato-based router to use from a remote machine somewhere in the web cloud.The reason for wanting to set this up follows. I normally run Squid on a Ubuntu 8.04 box, which I use while I am away from my LAN at home to browse the net (I like to keep things between me and my ISP, as much as possible . I rely on my proxy server on a daily basis. The way it works is I SSH into my Ubuntu box, and forward squid ports. I then point my browser to the proxy on my box. For various reason, however, I would like to set it up so that I can also do this via my router. So, I would like to be able to ssh to my router (I can already do this), forward the proxy ports, and surf the nets happily via my router at home. I am happy to use existing solutions (if possible), such as privoxy or squid, and am also open to setting up a custom-based solution, as may be necessary.
View 1 Replies View RelatedI just made a printer with help of system-config-printer and make the printer default.I assigned some print jobs to the printer. But my station on server1 doesn't dump jobs on the server1 which can be checked by the link Code:http://server1/printers/stationx How to make this happen ??
View 2 Replies View RelatedWhat are the steps for configuring a printer on Fedora?
View 5 Replies View RelatedI'm interested in configuring two Netcomm NB504 WiFi routers to work in a Bridge configuration. ie. Local PCs ---> Router <----//----> Router <--- local PCs
The NB504 router doesn't appear to have a native "bridge" mode. However, it does run Linux according to the documentation. I'm interested to hear from anyone who has actually got two of these routers to work in a bridge configuration. I'm not interested in general theoretical comments - only solid advice. I am also not interested in using other hardware for this exercise - I have two of these devices available for use in this project.
I would like to configure the button of my printer officejet 4500. However I do not manage to use scanbuttond daemon. How to test key pressing? It seems that nothing is seen by scanbuttond ... when I manually press a key on the printer.
Code:
$ dpkg -l | grep scan
ii gawk 1:3.1.7.dfsg-5 GNU awk, a pattern scanning and processing language
ii libsane 1.0.21-9 API library for scanners
[Code].....
I have an Epson RX610 printer attached to the USB port on my Thomson TG782T router.Works fine for our 4 PCs and laptops whilst running Windows XP.I don't seem to be able to add the printer under Ubuntu.I've tried all the addresses mentioned in the Active Network Connections.Ubuntu goes off an searches but doesn't find the printer (yes, it is switched on!)What address should I give it as a network printer?
View 2 Replies View Related1. Want to share printer via Router (with print server function)2. Want to share files OSs and network map see image.Then tell me how I may achieve this is such a diverse network.note sharing printer by router is not the same as sharing printer connected to another computer, which 99.9% of CUPS and Samba guides concern themselves with. My router model is DIR-320 or ASUS RTN16 both capable of print server hosting.
View 4 Replies View Relatedis a way to get a HP Deskjet F2420 all in one printer to start working when connected to a USB port in wireless router ASUS WL-500gP V2? The hardware store guy said it will work, I believed him but cannot figure out what to do to really make it functional. Shall I return the thing...?
View 9 Replies View Relatedsuccessfully installed a HP Deskjet f2420 to work for both computers through ASUS router WL-500gP V2. Suddenly, it won't work anymore, and trying to install it like I did the time before through HPAppSocket/JetDirect gives me a warning sign telling that the CUPS-server is somehow wrong and that during the CUPS-operation "client-error-not-possible" there was some kind of a fault and whatever...
View 2 Replies View Relatedthe 4 port ethernet US Robotics, NAM USR RTR model 8000 1.0, router and printer port works in windows is there any support in linux to make printer driver work ? It is configured in windows xp as local printer through usr server driver.
View 2 Replies View RelatedI had previously been having loads of problems getting my wireless printer to work with Linux [http://ubuntuforums.org/showthread.php?t=1453697]. Everything is working fine now. However, something that confused me is that whenever I tried to ping the printer _before_ I got it working, it would fail with a _different_ IP address. That is, the command 'ping x.y.z.3' would fail with a message saying it was unable to contact 'x.y.z.2'
Now I am looking at my router - for something unrelated - and I've noticed that rogue IP address shows up in the list of connected devices. It has a MAC address but for the device name it lists "<unknown>". Should I be concerned about this? how to figure out what this device is?
Linux and I have trying to get my Fedora 15 (x86 64bit) on my laptop to print to an Epson Stylus NX515 printer/scanner. I have the printer connected to a router through a wireless connection. I have other computers that are on the network that are Windows based and they of course are printing/Scanning just fine. The printer is located in a different room. I have been searching for a solution but non that explains how to install a printer driver for one that is connected to a router wirelessly.
View 1 Replies View RelatedIf I were to have a situation where I had installed the driver for a printer but when I went into printing on the control panel to "add" the printer the driver didn't show up - could I or should I consider manually editing some configuration file to get the printer recognized/ installed on the machine? If that were a good solution, how would I do it? What file would I look for? What would I edit in it? I know that first sentence is probably hard to read but I don't know how else to say it.
View 1 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedI want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
View 1 Replies View RelatedThese r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
Ubuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies View RelatedI am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies View RelatedI have managed to install ubuntu server and set it quite nicely to share my files and printers over my network. I have two printers, a Lexmark e232 and a hp C3180 multifunctional printer (i.e. printer+scaner+a copy function). I have no problem installing the Lexmark printer on my windows 7 computers on the network, however, the All in One printer only gets recognized as a printer but there is no way to get it to scan. I have been reading on the web about all in one printers but I don't quite understand what the issues are.
Is there a way for me to get the full functionality of this printer over the network? I think this wouldn't be a problem if there was some sort of software designed by hp that would allow me to add printers that are not directly connected to the computer (via usb) but are shared from another pc on the network.