I have an Ubuntu 9.10 server that is normally headless, but has a TV-Out that I want to start using. I've installed xorg, but when I test it with either startx or just X, I get the following:
Code:
X: warning; process set to priority -2 instead of requested priority 0
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
[Code].....
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Code:
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
Code:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
I was trying to tweak my video card's performance by configuring the xorg.conf file. There were many lines unrelated to the card there; so, to make the file cleaner, I decided to delete all the sections except the one I was dealing with. Obviously I shouldn't have done that. After rebooting the system, all the hardware that provided human interface stopped working. Now I have to find a way to delete that xorg.conf file. The computer is still connecting to the internet, and I have another computer running Debian available. Is there a way to access the broken computer with the other one?
View 4 Replies View RelatedMy Dell Precision Workstation was shipped in 2003 with RH Linux installed (most likely RHEL 4) - though not sure.
At the time, the dual monitors worked by replacing the X86config file with one sent from Dell.
Since, my disk failed and I had to replace the disk and reinstall RH Linux with the shipped disks, RHEL 5.
Now, I can not find X86config; rather, I have been trying to update the Xorg.conf file with no to limited success.
Both monitors are driven off of one Nvidia Quadro FX 1300 videocard. My goal is to get the screen to span both.
Does anyone have a Xorg.conf file that would support this?
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
I have followed the guide to install ATI proprietary drivers using RPM Fusion.
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
If I were to have a situation where I had installed the driver for a printer but when I went into printing on the control panel to "add" the printer the driver didn't show up - could I or should I consider manually editing some configuration file to get the printer recognized/ installed on the machine? If that were a good solution, how would I do it? What file would I look for? What would I edit in it? I know that first sentence is probably hard to read but I don't know how else to say it.
View 1 Replies View Relatedconfiguring RAID, LVM and my physical volumes for a new 10.04 Server install (used mostly as a windows file server and print server). My hardware setup consists of 2 identical 500GB hard drives. My desired end state is:
An ext4 root partition (20 GB)
A swap partition (2GB)
A fat32 partition (450 GB) (to be accessed via Samba)
The above all to be on RAID1 across the 2 disks
The way I see it, the there are a number of possible ways to configure the above, and I am looking for some advice on the best (feasible) option: Create a single MD0 raid volume accross the entire two disks, and then create a single LVG across this, with 3 sepreate LVs, on for each partition above Create 2 physical volumes on each disk, create two raid volume on these (MD0, MD1), one for the LVG with two LVs for the Root and swap, a the other for the FAT32 partition (this seems like more work?) Other more suitable options?
I've been trying for an hour now to try and configuremy e0mail with 'Evolution' and it's just not happeningI have a LIVE accountemailhere@LIVE.CO.UKAnd I know the incoming and outgoing address's I believeI have on both a SLL Encryption.P.s This forum has been the BEST assistance with my problems since I have gotten Ubuntu
View 1 Replies View RelatedI found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
When I upgraded my system for the first time, I got a message asking me to decide between a few menu items for configuring grub-pc. When I chose to keep the current version installed, GRUB booted to a CLI. What menu item should I choose?
View 1 Replies View RelatedI have installed Unbuntu 10.4 Cloud Server. I have two servers:
Front End Server (clound-fe):
2 Dual Core 32 bit Xeon processors (They do not support Virtualization)
2 Ethernet Ports
[code]....
I'm installing Ubuntu 10.4 DTE on an Acer netbook. The netbook came with Microsoft Windows installed and I'm adding Ubuntu via wubi on a USB thumb drive.
I'm almost done and it is configuring grub-pc. The last line is: Setting up grub-pc (2.98-lubuntu7) ... Then it hangs.
On the web, I find numerous bug reports about my situation, but no work arounds. What do I do?
I'm about to sell an old computer and I want to put a fresh copy of Ubuntu on it for the buyer to use. I don't want to configure a user name and password--I want to leave that process to the buyer, similar to the experience of (for example) buying a new Apple computer, where it asks for a user name and password on first boot after the OS is already installed.
View 2 Replies View RelatedI can not perform the upgrade. Installing upgrades hangs at configuring libc6 xscreensaver and xlockmore must be restarted before upgrading One or more running instances of xscreensaver or xscreensaver have been detected on this system. Because of incompatible library changes, the upgrade of the GNU libc library will leave you unable to authenticate to these programs. You should arrange for these programs to be restarted or stopped before continuing this upgrade, to avoid locking your users out of their current sessions. I've stopped xscreensaver it is the only session running. I will reboot and stop xscreensaver and then run the upgrade.
View 1 Replies View RelatedI have some free space (not partitioned) on my disk drive. I have not configured LVM during installation.Is it possible to modify some of the existing partitions to be a member of LVM?
View 4 Replies View RelatedCame from 8.04, fresh install. The monitor was not detected properly, I have 1024x768 max resolution on a 1280x1024 screen. As 10.04's xorg has no xorg.conf file, I cannot tell it the right data. What and where are the new config files?
View 5 Replies View RelatedI wanted to install ubuntu 11.04 alongside win7 on my notebook (with no optical drive). I created 2 primary partitions (one for win7 [ntfs] one for ubuntu [ext4]) and 2 logical partitions (one for swap one for general use for storage[ntfs]) by running ubuntu from my USB Flash disk and using gparted. First, I installed win7 without having any problem, then ubuntu also without having any (apparent) problem (I installed boot loader on MBR: the default setting). After the ubuntu installation is over, I was instructed to restart my computer as usual and win7 started without asking me which OS to boot. When I run ubuntu from my Flash disk and run gparted and selected the boot drive as the partition on which ubuntu was installed, I got the error saying "missing operating system". I suppose GRUB is misconfigured and that is causing the problem because nothing went wrong during the installation processes. How to configure GRUB by running ubuntu from my Flash disk. BTW win7 is working just fine.
View 4 Replies View RelatedI recently started installing Debian and I want to download and install a GUI in it. For that I could use my university Wi-Fi connection. I was told that it's a WPA2 secured connection. But when I tried to configure it, it keeps asking me for a "passphrase". I don't have a passphrase! All I have is my username and password for the Wi-Fi. What should I enter as my passphrase ? I tried both username and password and neither of them worked.
View 4 Replies View RelatedI've been using Ubuntu since Feisty Fawn, so I've been around the block when it comes to upgrades. From 9.10 to 10.04 I did a clean install, but I decided to try my luck with a web upgrade to 10.10. Well, so far it looks like that was a bad idea. I can't stay in gdm for more than about 1.5 mins before it crashes and drops me back to the greeter. Honestly, I'm not sure exactly what's crashing, but I'll append what logs I think will give some info.
[Code]....
every time i click or open or move a window it freezes for several seconds. system monitor shows at this time the process Xorg is using 100% cpu.it never drops down below 40%, even at idle.my system is amd 64 4000+ 3gb ram and ati 3650 HD video.i have kubuntu 64 10.10 with all the updates and default ati drivers.
View 6 Replies View RelatedToday I decided to do the upgrade from 10.4 to 10.10. Unfortunately the upgrade has frozen for the last few hours (after it has completed ~60% of job)... The problem is with xorg, when I log through ssh to the computer I see the xorg process takes 30%. what I could try not to 'smash' the OS... I am not an expert. During the upgrade I have experienced only 1 error with no space left on the device (it exceeded the estimations) but I have freed additional 2GB and it continued for some time.
View 3 Replies View RelatedI've just upgraded my Mythbuntu box to Natty. Now I have a completely unusable system due to Xorg taking 70% of CPU. Mouse movement is possible and I can just type but that is about it. Using MythTv is impossible.I'm running a standard mythtv build with the xfce desktop how to fix this one as it has rendered my PVR system impotent.
View 4 Replies View RelatedI've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
I didn't get any responses to my question yesterday about grub with multiple disks
By "best," I don't mean with the most technical detail about each and every option. Instead, I'm looking for a guide that provides a step-by-step instructions about how to do some of the more common tasks, e.g.: configuring grub to work with MS Windows 7 and XP how to reinstall the MBR with grub after MS Windows' install program overwrites the MBR reinstalling the MBR from Fedora's LiveCD (without going through the whole install process) because I can't boot to my hard drive. configuring grub to work with multiple OS on separate hard drives
Again, I'm looking for a guide that starts with the basics about how to create a configuration file and write it to the MBR.
I installed the Centos 5.5 on a WM instance. Run out of space after doing the updates. It is very difficult to keep re-partitioning /
I tried to install a new instance but it doesn't let me configure the disc and it just goes and install the OS.
How can I use the good old installation options etc?
What happened to control? This became a control nightmare.
I've read through tutorials on xrg.conf and xrandr but I have a hard time sorting it all out.I have two questions:You have installed a distro and you're looking at a desktop, but its off center on the monitor and its in low graphics mode, and possibly the wrong refresh rate. [ I've been in this situation with multiple distros, but lets use Ubuntu for the example.]1) How do you determine the actual current resolution?2) What are the steps -in order- to configure the (single) (desktop computer) display?
View 2 Replies View RelatedI realize that I ask for a rather crazy thing . My problem is I own an HP2133 with via graphics. These drivers are very poorly supported, both open-source and proprietary drivers F13 runs quite nice on that machine, but playback of videos or flash lacks much perfomance. Proprietary drivers are only provided for Ubuntu and that only for 9.10 by VIA until know. With these drivers Ubuntu 9.10 is able to playback flash/videos quite good. But Ubuntu (9.10) brings a few annoying bugs, which do not seem to be fixed, that is the thing I do dislike with this ditstro. I pushed my luck and tried these drivers with F11/F12, but they did not work due to differences in xorg version. In F10 it was possible to use 8.04 VIA drivers, but F10 has EOL and is besides flash playback considerably slower than later Fedora releases.
So I thought using alien or similar tools to convert the xorg packages from Ubuntu 9.10 into rpms and install these to a F13 release.... (Like downgrading to an older xorg like it was necessary in F9 for ATI cards ...) As the VIA drivers did not work with earlier version of Fedora, I had the idea porting Ubuntu's xorg to Fedora that way.
Before I start spending a lot of time on this, I would like the freaks and neerds around here, if this to your opinion could have any chance of success.
I have setup the Ubuntu server on Dell Powerdge 2900 (the latest server version 9.XX)I would like to install the 'minimal' X11 package so I have done the following Step1:Quote:
$ dpkg -l x11-common
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
[code]....
I need a video driver for SIS M760GX for an ACER Aspire 5000 laptop.
Everywhere I've looked it says to run
sudo dpkg-reconfigure xserver-xorg
Supposedly, this is supposed to open a window where I can change settings. However it does nothing and just returns me to the prompt.