i am too new for linux..I installed Ubuntu 10.10 desktop edition from windows.When i am trying to configure network connections i am facing problems
Code:
udo pppoeconf
no working ethernet card could be found.If you do have an interface card which was not autodetected so far,you probably wish to load the driver manually using the modconf utility.Run modconf now?
/usr/sbin/pppoeconf: 523: modconf: not found Ifconfig
[Code]...
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View Relatedi've got a select based application that wants to support a large number of mostly idle connections. the code is java and works on windows, suse enterprise linux, mac os x. it does not work on centos 5.5 (32-bit, 2.6.18 kernel, 1G of memory).
i've read and followed the directions in various articles about tuning linux for large numbers of connections (including the C10K problem), and gotten the number of sockets up to 3200.
these didn't make any apparent difference:
[URL]
on windows, i can get up to around 78,000.
on suse enterprise linux (a few years ago), i got up to 90,000. that's where i got bored and stopped.
on my mac laptop with os x (snow leopard), i got up to 10,500.
i have used ulimit -n 10240
my current goal is 10k sockets.
the test is that i'm opening one socket at a time until it fails. when it fails, many of the sockets which have already been opened also fail, in one giant cascade. sounds like a buffer / memory problem.
each group of 64 sockets gets a thread to manage select calls for them. thus i'm only using around 61 threads total when it fails.
I have ndiswrapper installed, and have successfully installed the drivers, I have also used nm-applet (and x forwarding) to configure wireless connections. My problem is that I want to reboot and unplug my wired connection and use just my wireless connection, but when I reboot it doesn't seem to connect to my network.
is there a command line tool or an independent tool that i can launch forwarding x I can use to search for and connect to wifi networks that would also have the ability to save configuration so that when I reboot the system automatically connects to my wifi?
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
have a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedDoes anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedI'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies View RelatedI have my box setup as a router/NAT with two different network cards. One for external connection(connected to the Cable Modem) one for internal connection(used for internal DHCP). It works perfectly when I manually activate the two interfaces after booting(both interfaces always show up as inactive after booting), then the DHCP server and firewall. I am confused, however, by which program has control of these interfaces.
First, there is the Network Configuration (System->Administration->Network), which is where I manually start the interfaces after rebooting. Both interfaces are set to "Activate when computer starts" in here.
Second, Network Device control(System->Administration->Network Device Control), which looks to be almost the same thing as the above.
Third, the NetworkManager applet(on the top bar) - both devices show up as unmanaged when I left click on this, but if I set "Controlled by Network Manager" in the "Network configuration" window(number one above), It still does not work. Can I get rid of two of these programs, or is there some way to edit the startup scripts to start my ethernet cards before the dhcp server/firewall(which is shorewall BTW)?
I just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies View RelatedI just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.
network manager isnt showing any network interfaces. ifconfig shows wlan0 and eth0 and internet is working. how can i get network manager to manage those connections?
View 8 Replies View RelatedI remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.
View 2 Replies View RelatedFirst a warning that I'm so clueless it hurts. Initially I entered the Linux world as a solution to my blue screening Alienware Aurora desktop (which later fried anyway ironically enough). I decided to give up on Windows for everyday use cause you can't strangle an operating system. My first and there after Linux experiences have been fantastic. Internet works without prompting through various distributions of Ubuntu, Mint, and KDE with the exception of enlightenment.
But now I come to openSUSE 11.4 and as my title suggests I'm having a hard time connecting to the internet. I've got a wireless card and router and all that jazz but I can't even select the options for wired or wireless connections under Network Connections in the Network Management Settings. Everything is greyed out except for VPN. I even have the desktop wired to the router and it still is not giving me any indication that it will connect.
I'm wary of trying to enter ip addresses and things of the like because I honestly don't know what i'm doing here.
My router is a Netgear N150 Wireless WNR1000 and in the Kinfocenter under Device Viewer I found my wireless card to be a RaLink RT2561/RT61 802.11 g PCI and my wired device thingy to be an Intel 82540EM Gigabit Ethernet Controller.
I have just installed Ubuntu 10.10 64bit on my laptop Toshiba Satellite A665-S6065 and I can connect to wired network but I can not connect to wireless network "Network Connections disconnected". Im following this post http://ubuntuforums.org/showthread.php?p=6183681
1. Machine Brand and Model (PC/Laptop): Toshiba Satellite A665-S6065
2. Wireless Brand, Model and Wireless Chipset:
Code:
lspci
Output:
Code:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
[Code]...
I am running Ubuntu 9.04 as a partition with windows 7 on a acer aspire 5742, I would like to connect to the internet in Ubuntu, wirelessly, but I am unable to turn my wireless on in Ubuntu, and network manager says "no network connections available". I have the following network adapters:
Atheros AR5B97 Wireless Network Adapter
Broadcom NetLink (TM) Gigabit Ethernet
Microsoft Virtual WiFi Miniport Adapter
I'm running VBOX OSE and wanted to access files on my native machine (ubuntu 9.10) from my virtual machine (Windows XP professional)
Now, I can ping the native host from the XP box, but can't access the share.
I have tried re-sharing the directory but it won't work.
Another interesting aspect is that I can't access the VBOX either. It gives me the error:
"Error: Failed to retrieve share list from server Please select another viewer and try again."
Up until this morning it worked just fine.
Unfortunately I didn't pay attention which software was updated during the process.
Here is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:
Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00
[code]....
Somewhere I've lost the Network Manager. it is listed in the installed programs as well as I can see all the components but do not see it in the menus anywhere nor the icon in the top panel... So even though I can connect to the wifi networks that I have connected to before it is very difficult to connect to new networks using Network Connections or so I find... I've tried reinstalling it many times but always find it saying installed but can't really access it... So how can I change that or are there a better network connection manager out there ???
View 2 Replies View Relatedi've installed ubuntu 11.04 on a friends Asus Eee pc 1005HA netbook. after the installation i tried to connect to the router using wireless, and when i enter the key, it fails to connect, so i tried using an Ethernet cable to connect but that doesn't work either,the network devices on the computer are:
Atheros AR8132 PCI-e fast ethernet controller
Atheros AR 9285 wireless network adapter
It lists the wireless device and the solutions to the problem, however, the solutions seem to be for Ubuntu 10.04 and also 10.10, and im not sure if it will work for 11.04 so far i have been unable to find out anything on the forums about the ethernet
I'm toying around with ubuntu + LTSP. I've managed to get the computers to boot off the network card "eth0". "eth1" is facing the internet. How would I go about the process to bridge the connections so the ltsp clients can access the net?
View 2 Replies View Relatedentries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop.
View 5 Replies View Related"Need help with entries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. I will appreciate some step-by-step instruction or example of how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop." I have repeated what I tried in the ubuntu forum without success. I'm really in newbie category, and not comfortable with computer or internet jargon. I can still connect with ubuntu 8.04 and firefox, just once daily. In a later post I also added: In Ubuntu 8.04 there was a system> admin> network tab (missing in 10.04). In the connections tab "wired" was checked. The general tab had my computer name (tsq-laptop) for host, and a blank box for domain name. The DNS tab had 192.168.1.1 in the servers box (presumably my service provider BSNL), and nothing in search domains. The hosts tab had a list of IP addresses and aliases, the first few being:
127.0.0.1 - local host
127.0.1.1 - tsq-laptop
::1 - ip6 local host ip6 loopback
fe00:: - ip6 localnet, .... (and a few more such I think most (or all) of these entries were generated automatically by the system, since I don't understand the jargon at all! I don't recall having any difficulties then, some two years back.Before that I had major problems in using the internal modem for a dial-up connection, but got detailed help by e-mail/internet from some really knowledgeable people in Europe and elsewhere regarding linmodem configuration, which I followed blindly and it worked!
In 10.04 there is only the taskbar icon to edit settings, and it has a different structure. It asks for MAC address (example 00.11.22.33.44.55). Other info required is IPv4 settings, DHCP client ID, about routers and other stuff. There may be other system settings to be made, which I can try with proper guidance. The ubuntu help page gives very sketchy information, and the images are not clear at all. No response to that till second day. Subsequently: In the 'wired' tab the 'routes' button popped a table where I entered address as 127.0.0.1, and netmask as 255.0.0.0, leaving gateway and metric blank. This is all geek stuff for me - I'm an old-fashioned engineer from the slide-rule era!
Should all this have been in the newbie forum? Thanks, =TeeSquare=
I am total newby in Ubuntu 10.04. I have just installed it in my office where I have two networks card one connect to a router giving the internet access and the other connected to the windows based work network providing access to the work network sources. In XP everything works fine as I can keep both connections alive and have the results I want.
However although I don't know how to do it in Ubuntu 10.04. Till now I have setup the first connection directly to my router and I have internet access but I cannot set the other one. Another question is how I can force ubuntu to use the router connection as the default one when I log in.
Since I installed ubuntu 10.04 I dont see my eth0 card in System->Preferences->Network _connections. Everything works fine but it puzzles me. In ifconfig iI just see the eth0, networking seems to be working fine, but it keeps puzzling me. Adding theinterface is no solution: add it and it doesnt show again
View 4 Replies View RelatedUsing xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.
View 3 Replies View Relatedi'm currently using ubuntu 10.04 and wanted to update to 11.04 and that means backing up all sorts of data and configuration.Regarding the wireless configuration list, i have a few with password and auto connect, i wanted to know if there is a way of saving that listconfiguration other then manually.
View 3 Replies View Related