I've been using CentOS for quite a long time, and I've recently switched to Ubuntu 10.10 as a desktop. I'm having one small stumbling block, I can't seem to setup LDAP authentication via a GUI. I found this post here.
[URL]
Is there a GUI application that allows LDAP configuration similar to the Cent OS one?
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
operating system: CentOS 5.5 git version:1.7.3.4 ldap server:OpenLdap Http server:Apache 2.2 the software above have been installed. How to config /etc/httpd/conf.d/gitweb.conf file to let git authed by ldap?
View 2 Replies View RelatedI would like to ask:How do I setup LDAP auth of users/groups on Debian 5.0?Is it using LDAP Migration tools? Can be done differently? Using different tool? Some nice tootorial?Some up to date book for LDAP or I need to dig in openldap.org?I'm learning by book which is a lil bit older so Im bit confused.
View 1 Replies View RelatedLDAP authentication problem on debian squeeze? To my knowledge, I have everything setup properly to do ldap authentication + local authentication on a host. I can login as a local user. I can login as an LDAP user.
When I log in as an LDAP user, my primary group is set properly. It is an LDAP group. I can change the group ownership of files to LDAP groups using chgrp. So far so good. This all works as expected. The commands getent passwd and getent group work wondefully, and generate the expected results. I can newgrp to any *local* group, but if I try to newgrp to an ldap group, I get the following error:
setgid: Operation not permitted. I've tried googling and asked on #debian on irc.debian.org. No luck.
If I ssh from my laptop (running F10) to the server (centos 5.2) it asks for the password, but everytime I enter the correct password it says incorrect password. when I do the same from the server to my laptop I can get in just fine. I think my passwords are stored as ssha in the LDAP (I tried clear passwords and that dosen't work either).
View 1 Replies View Relatedin configuring SVN with LDAP authentication on Ubuntu 9.10.
I am using SVN 1.6.5 on Ubuntu 1.6.5 both are working fine but I want to implement Ldap on the same server
other Details Ubuntu 9.10 32-bit, Svn 1.6.5 with apache2 and windows 2003/2008 32-bit
when i m configuring ldap server on linux 6.0 for my college project with the script below :- problem is that DB_config.example is not available under /usr/share/doc/openldap-servers-2.4.23/
[ for query without SSL ]
# ldapme
# vim /etc/auto.master
[code]....
how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.
View 1 Replies View RelatedLately I have been receiving this in my auth.log file. It seems to be repeating over and over, and I didn't know if was anything normal or something I should be worried about...
Code:
I've been busy with configuring Samba with the 389-Directory Server (former Fedora Directory Server) for the past weeks and I almost have everything working. The last thing (I hope) that I haven working are the smbldap-tools which I'd like to use for adding computers and users to the domain. The part where I'm stuck is with the security certificates. I don know how to get the client certificates out of my installation.
My smbldap.conf file contains this:
Code:
# $Source: $
# $Id: smbldap.conf,v 1.18 2005/05/27 14:28:47 jtournier Exp $
#
# smbldap-tools.conf : Q & D configuration file for smbldap-tools
# Purpose :
# . be the configuration file for all smbldap-tools scripts .....
I used the setupssl2.sh script to setup ssl for my 389-ds, which seemed to have worked fine. I however simply have no clou how to get client certificates out of this.
i want to configure an Open LDAP server in Ubuntu....and also want it to connect to its clients, i have two machines for testing,one for client & one for server, i followed the tutorials on ubuntu documentation,but did not succeed in making either the client or the server,
View 2 Replies View RelatedI'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db
[Code]...
I took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.
The firewall is open for ldap.
I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).
However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.
It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:
# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3
[code]....
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
why i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
I've compiled openssh-5.4p1 on RHEL 4.8 with Openssl 0.9.8m + pam It works perfect without pam (pam-0.77-66), both with password and public key auth. Whith pam enabled and LDAP (openldap-2.4.21, from scratch) something strange happens: system users: I can do ssh with both password and public key LDAP users: public key works for remote users, still I cannot do ssh with just password. I'm trying a custom PAM configuration, because the default one (even with authconfig + LDAP ) blocks ssh even with system users.
My pam SSHD configuration is:
#%PAM-1.0
auth required pam_env.so
auth sufficient pam_unix.so likeauth nullok
auth sufficient pam_ldap.so use_first_pass
[code]....
My LDAP users are ok: i can do "su - " remote LDAP (so that nss_ldap is OK), also getent passwd and getent group is ok.
I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.
Relevant sssd.conf:
[domain/default]
auth_provider = ldap
cache_credentials = True
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
I had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.
View 2 Replies View Relatedwe have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
I got some entries in my auth log that I am puzzled by. What could be the cause? I was not using my machine at the time of the logging.
Code:
On Ubuntu 10.04 with x11Vnc server, if the screen requires logon (such as if locked or upon reboot), through the VNC terminal, I always get authentication error (incorrect password). Sitting at the keyboard, I can logon just fine. Once logged on, I can access everything through VNC just fine.
Error in auth.log (username = bob):
unix_chkpwd[3926]: password check failed for user (bob)
gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): authentication failure; logname= uid=1000
[code]....
I have edited /etc/logrotate.conf to include
/var/log/auth.log {
rotate 6
monthly
copytruncate
compress
}
To try and prevent auth.log rotating daily and change it to monthly but it doesnt seem to work.
Either im doing it wrong or i need to restart some service?
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
As far as I understand ssh runs on port 22 but in my /var/log/auth.log I see
Quote:
why is this logged 48504 different than ssh port 22?
