software can I use to monitor the performance of apache on my dedicated server?Anything free that can track why the program crashes or the processes that are running when it does?It continues to crash "starting today" and I can't seem to find out why.
View 1 RepliesI've had a few different versions installed in Ubuntu 11.04 64 bit and now every so often, no rhyme or reason, flash crashes. Sometimes its in the middle of a video, I have no answer for whats causing this. I have the 64bit Square Flash installed at this time through the sevenmachines PPA.
View 4 Replies View RelatedCode:
[Sun May 22 04:02:06 2011] [notice] SIGHUP received. Attempting to restart
(98) Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Above message is from /etc/httpd/logs/error_log.1. Saturday morning I reinstall my server. After finish, no error. I can access my HTTP server. Monday morning it has crashed. I don't know what is the meaning about this message.
bit of a server noob having built a server to hold a php website for a client hosting at home, I have some experience, but VERY limited and don't speak fluent server.My problem is that overnight each day apache on my clients server stops responding. I can still access via putty / webmin.The best I can see it, it seems that apache 2 opens too many child processes and chokes the system. My reasoning for this is:-Though I have max child set to 20 with a keep alive of 30 there are dozens of child processes 'apache2 -k start' running, some of which were started 9.5 hours ago.
-I can stop apache, though that doesn't kill these child processes. I can terminate the parent process which does kill the child processes, however restarting apache after killing the child processes results in a system crash. Rebooting the server remotely after apache has stopped responding also results in a server crash. That is NO response on any port.I would be happy to display any pertinent server config/logs etc if anyone can help me troubleshoot this?
At my current job it is my responsibility to update all the servers, as well as some of the workstations. Its an easy enough job, I just remote in to each "machine", and use Synaptic to update. Well, we have a package that was created here "key-build-tools-g6" and for some reason, after I update and go to close Synaptic, it says "There are still marked changes that have not yet been applied. They will be lost if you choose to quit 'Synaptic'". If I cancel and "Apply Updates" then look at the "Details" it says "key-build-tools-g6 (version 18) will be upgraded to version 18". I go ahead and update it again, it downloads, and installs, but then when I go to exit... Same thing.
View 6 Replies View Relatedi have updated my ubuntu 10.04 to ubuntu 10.10 and now when I boot the pc, it choes ubuntu logo, and than the monitor goes to sleep but boot continues, cause i can hear the sound!
View 3 Replies View RelatedI have winfast tv200 expert tv-tuner. I am using TvTime to watch tv through it. verything is working fine except that sound continues to come even after i quit tvtime. is there any solution for it?
View 3 Replies View RelatedUpgraded to 11.04 last night. On reboot, everything goes fine. I logon, my wallpaper shows, I get the Ubuntu sound, my icons appear, then the icons disappear, wallpaper shows for a number of seconds, icons reappear - then this loop continues. I've booted into recovery, run repair packages and update grub - but makes no difference.
View 4 Replies View RelatedI'm using vsftpd to setup an ftp server, but whenever i attempt to connect, it asks me for a user name ( which i enter and it accepts) but it then asks for a password, which i am clueless as to what it is. I'm certain that i havent specified a password in any config file. Is there a default password i should know about?
View 1 Replies View RelatedI run the ping command using system() in C. It start pinging the desired destination but when I close my application it continues to ping. Is there any solution that as soon as I close my application it also stops pinging. Any change required in my C code?
View 2 Replies View RelatedSound continues to drop out of flash in firefox. Reinstalling flash will bring it back, but it will drop out next browser session. All audio works in other applications. Skype, Last.fm, Rhythmbox, Amarok, Movie Player, etc. Even downloaded swf files will play sound. It's just in firefox, from what I can see so far. I don't know if Steve Jobs flying overhead in a black helicopter has anything to do with it, but perhaps.
View 6 Replies View RelatedOpenSuse 11.2Firefox 3.6.6DownThemAll 1.1.1.0I am downloading Slackware 13.1 (32 bit) from Softpedia using the firefox Add-on, DownThemAll.My computer is not on a UPS, so if the electricity is off, how should I make sure after restarting the computer, the download continues from where it left rather than restarting the whole process again
View 14 Replies View Relatedn an up-to-date kubuntu karmic I experience the following:watching a flash video with adobeflash in firefox in fullscreen mode, randomly the picture freezes while the audio continues. The video unfreezes when I move the mouse, the video then fastforwards to the actual replay position. Video card is nvidia geforce fx5200 on proprietary driver, I have the desktop effects enabled. Any idea what this is about? I discovered the effects causing wine windows to break (no window contents, no foreground, no reaction on mouse) when changing the desktops or minimizing them. Seems like there are some bugs in the window manager / decorator...
View 2 Replies View RelatedHow do I disable the screensaver password prompt when I've already turned it off in System > Preferences > Screensaver? I tried checking and unchecking the box again and I also tried rebooting.
Another strange phenomenon is that after I enter my password, I'm now disconnected from the wireless network. Any thoughts?
I'm using 10.04 lucid lynx.
I have a number of computers working just fine on my wireless network so I don't believe it is a router issue. I am running 10.04 on a dell gx280. I plug in the WUSB54g and ubuntu sees it and it connects to the internet just as it should. I can surf the internet thruough different browsers, and although a little sluggish, it works just fine. The problem is when I download a file. It starts out working as it should but continues to slow down to a crawl. Update manager had a 54MB update, it started out downloading, but then said it would take 2 hours so I just cancelled. I have several WUSB54g's and they all have the same issue. I changed to a different type of adapter, and the update manager only took a couple of minutes.
View 3 Replies View RelatedHave just upgraded to 10.10 using update manager, using firefox playing flash videos works fine untill i try to watch in fullscreen where the video freezes every few minutes although the sound keeps playing.toshiba satellite laptop using Intel, GMA 4500MHDto solve this would be appreciated, really don't won't to have to re-install 10.04 if i can avoid it
View 9 Replies View RelatedI am using dell vostro 1088 ,my earphones are not working.When i plug in the earphones , sound continues coming out of speakers.I had tried different earphones as well.
View 12 Replies View RelatedThis new feature of either making me wait a full minute or yet a confirmation of what I have already prompted the machine to do, ie. reboot or shut down, is a brainless waste of code. If it were a little easier to "accidentally" reboot it would be a different story. But to manually open the shutdown menu and click "shutdown" or "reboot" and then have the machine make me wait or manually instruct it to proceed with the command I have already issued is just, ... well, it's just plain dumb.
It's probably derived from the same logic which "upgraded" the package manager to only allow one package selection at a time. Yet another brain fart. I'm going to get "upgraded" right into another linux distribution if this kind of idiocy continues!
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies View Relatedwhen i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies View RelatedI'm running Fedora 15 with current updates and kernel. I do not have anything special or non-standard about my configuration or setup. I use grsync to sync my home folder files to a remote rsync server on my network. I've checked my hard drives and my memory and everything else I can think. Here is the problem:
grsync will run for some time and once it nears completion it will crash. This, however, is no standard crash. It literally shuts my computer "OFF". I have shared the remote rsync folder through CIFS as well and I can copy those exact same files through nautilus with drag and drop without issue. I have had a few occasions where the rsync process will complete without issue, but this is a rare occasion. Since it powers my computer completely off I do not enjoy the luxury of having any log files or messages to attempt to diagnose from.
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
currently running debian lenny using the non free adobe flash plugin and have just tried watching an iplayer program and yet again, as with ubuntu and sabayon linux, every time it goes full screen after a few minutes the plugin crashes.
is this a debian compatability issue as i believe the other two distributions i tried before are also based on debian?
i like ..... and iplayer both of which need flash, is there a way to make it work? i know with videos i can use the html5 version but iplayer has no such option so for that i need flash to work
So I puts my shinny new F12 install on my new computer. It's a little climb for me but for the most part easier then some of the other F's that I have tried to install.
One problem I have right now is my inkscape crashes as soon as I try to put some text on a page. I tried the automatic bug report thingy but it complained about me not having a log in. inksacpe is really becoming a very important application for me, I have been trying to shy away from the Windows programs I have been using.
I must say, F12 seems to really be advancing the fedora project into a nice desktop system.
after mistyping my session passwd at the kdm login, I retried again and the greeter instantaneosly crashed and X died on tty1 (black screen, blinking cursor in upper left corner) Switching to tty2, I tried to login again but did not succeed to start X again, so I rebooted the system and looked at Xorg.0.log.old. There I found: xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call
Here we go again!
P.S.:
I do not know how long this error exists, I noticed it only yesterday and the updates today didn't help.
It just crashed today, I had to press RESET to bring it back.
How can I find out what happened when it crashed, like 'Event Viewer' in Windows?
right now, dmesg shows something like code...