I use Slackware 13
Code:
Linux tmkd 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686 Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz GenuineIntel GNU/Linux
I try to connect to some AP via wpa_supplicant. But i see this errors. Can you help?
Code:
TERMINAL
bash-3.1# wpa_supplicant -D wext -i wlan0 -c wpa_supplicant.conf
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
[code]....
When I run wpa_gui I get a "Failed to open control connection to wpa_supplicant." message and an endless stream of "PING failed - trying to reconnect". I'm sure wpa_supplicant service is running, it also seems to be working correctly (program logs show activity when I connect to a wpa secured network via gnome network manager).
The location that ctrl_interface (in /etc/wpa_supplicant/wpa_supplicant.conf) points to (/var/run/wpa_supplicant) is an empty folder. I'm able to connect to a simple WPA network at home, but the one at my university needs special configuration and I couldn't get it to work by editing the .conf file. That's why I need the gui. My network card is Atheros Communications Inc. AR928X Wireless Network Adapter, the driver is ath9k.
i believe it is a wpa_supplicant problem. running ubuntu 10.04 on a toshiba netbook. i have my account which cannot connect to internet, wicd returns an error that it cannot obtain ip address. cannot even connect to a unesecure network for that matter. if i switch users to another user and do the quick switch users i can get internet then i switched back to my main account and here i am postings. how do i begin to hunt down the problem logs, settings how do some of you begin to hunt down the cause of this and where it would be located.
View 1 Replies View RelatedI cannot use wpa_gui, because when i open it i see error like in topic: Could not get status from wpa_supplicant'
View 5 Replies View RelatedMy brother is thinking of installing Slackware64 13.1 on his laptop. He was wondering though how to configure his wireless card. How would he do this? He is using an Intel wireless card, but I am unsure of the exact model. Another question is would Wicd do this automatically or do you still have to use either iwconfig or wpa_supplicant and edit the corresponding config files?
View 4 Replies View RelatedI am running -current on an ASUS eeePC 1000HE. Wireless was working fine up until the time I applied the latest changes from the Slack -current tree, which upgraded wpa_supplicant. Now, no networks are detected.
I looked at some related threads here and did some basic checking: neither the eth1 nor wlan0 interfaces show up in iwconfig or ifconfig output. Am afraid I am still a wireless dunderhead and don't know where to start troubleshooting this issue.
First- clean installation of Ubuntu 10.04, with default network manager installed, I had a taskbar icon, and it could see the available wireless networks, could not connect to them, even the ones with no security. Purged all network manager files suggested in various threads here, Installed wicd- it could see all available networks, could connect to unsecured networks, but not to my own secured network. Password was correct in the wicd/configurations file. Removed wicd, and reinstalled network manager from synaptic. I have to network manager applet. When I try to add it to the notification area with alt-f2, applet-nm, I get a brief flash of something in the notification area, but no applet.
System=>Preferences=>network connections shows no wireless connections, but I'm obviously connected to something (probably my neighbors unsecured network) since I"m reaching this webpage. I tried to run sudo wpa_cli from the terminal to see what network the computer is connected to, and it gives me this error:
Quote:
Could not connect to wpa_supplicant - re-trying
wpa supplicant is installed according to synaptic
Various troubleshooting output:
[code]...
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I have a realtek 8187b devid 8189 and tried connect to a wep encrypted connection I "borrow" frequently using iwconfig first and it wouldn't connect then I installed wicd and it says bad password. I've connected successfully using multiple other distros, openbsd, os x, and windows. Anyone have any ideas what the problem could be?If you need anymore info I can boot into slack and write it down or something.
View 3 Replies View RelatedDebian doesn't seem to handle the association between wpa_supplicant.conf records, and /etc/network/interfaces. This is in wpa_supplicant.conf:
Code:
network={
ssid="MYSSID"
key_mgmt=WPA-PSK
psk="stuff"
[code]....
What's happening is there are two gray circles as the wifi attempts to connect. The first one turns green, but it never completes the next step. The syslog shows that it's waiting for the (nonexistent) DHCP server to respond. If I turn on DHCP, the connection completes, but the routing is messed up (because at that point it actually tries to use the static IP from /etc/network/interfaces). So it seems to associate eventually, but it's way too late. I need it to associate soon enough to know not to attempt DHCPDISCOVER.
I start to learn wpa_supplicant recently,and I got the code already,but the code is complicated,and I don't know how to start learning,and Is there any book to discuss the architecture about wpa_supplicant?
View 4 Replies View RelatedI am trying to get a wlan connection using my new Wlan-Stick. It has a Atheros ar9271 chipset.
Code:
Bus 001 Device 002: ID 0cf3:1006 Atheros Communications, Inc. TP-Link TL-WN422G v2 802.11g [Atheros AR9271]
Modules ath9k_htc and ath9k_htc_common are loaded. I can scan for network using iwlist or airodump and get the whole lists of networks. I've copied the config file I use with wpa_supplicant from a working system:
Code:
network={
ssid="Pasta"
scan_ssid=1
key_mgmt=WPA-PSK
[code]....
But I am not able to successfully connect:
Code:
[vortexbox.localdomain ~]# wpa_supplicant -i wlan0 -c wpa.test.conf -Dwext
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Device or resource busy
[code]....
the "pre-shared key may be incorrect" I have rechecked the key twice and it is correct (actually it cannot be wrong because they file was copied from a working system). I have also tried to connect to a WEP encrypted network using iwconfig without success. I get no error when connecting but iwconfig tells me "Access Point: Not-Associated".Because of the "Device or resource busy" I tried a "lsof | grep -i wlan" but there are no results.
if the NetworkManager uses wpa_supplicant? I normally dont use NetworkManager and decided to try it. I started it and tried it out and it works with WEP and WPA! I cant figure out why using the iwconfig command is not working by itself for WEP. WPA working with NetworkManager is just a bonus though.
View 4 Replies View RelatedI'm working on a RHEL 6 base image for virtualization and I'm trying to pare down the things that we don't need. Considering none of the virtual servers will have wireless networking, I figured it'd be good to kill that wpa_supplicant process. even with the wpa_supplicant service off, NetworkManager seems to start it right back up. There isn't any wireless devices configured, so I don't know why it does this. I can't even kill the process, it starts back up immediately. Is there something in either the Network Manager or wpa_supplicant config files that would disable it permanently?
View 3 Replies View RelatedI wasnt sure where to put this, since both of my boxes are slackware i posted it here. I am having ssh issues, im going from a 64 bit slackware 13.37 to 32 slackware 13.1. Now I can connect from the 64bit box with windowsxp pro using putty, to the 32 bit slackware box, but i get an error on the slackware 64 bit which says no route to host. It is the same computer, host name is the same and router ipaddress is the same on either windows or slackware boot. It isnt a fire wall, as i had none, until a couple minutes ago, of which i still get the same error. Is there something i am required to do to set up ssh on this box. Oh just for the record, I cannot connect to the 32 bit slackware box with my macbook pro either.
View 4 Replies View RelatedI can't connect to Internet on Slackware. I've blacklisted the modules rt2800usb, rt2x00usb and rt2x00lib in /etc/modprobe.d/blacklist.conf.
View 6 Replies View Relatedright now im using the nm-applet but i dont like it. it produces lags. i think the periodical ssid/broadcast check might be the cause :/it lags every minute or so...in games and skype it is very annoying! if there is a possibily to disable these scans in nm-applet it would be fine too.for the moment im "using" this wpa_supplicant config:
Code:
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
[code]....
for weeks now I have the following problem: I am not able to connect to my wireless home network for most of the time. I am using Ubuntu 10.04; an Intel Wifi AGN4965 card and as driver "iwlagn". Maybe the solution lies within these messages (from daemon.log):
Sep 20 22:03:35 ubuntu NetworkManager: <info> starting...
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Found user 'avahi' (UID 104) and group 'avahi' (GID 111).
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Successfully dropped root privileges.
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: avahi-daemon 0.6.25 starting up.
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Successfully called chroot().
[Code]....
I apologize if there's a solution to this somewhere on the forum, but I searched around on google for several hours before posting this, so I assure you, I'm not trying to waste your time.Here's the deal. I have a file/print server running wpa_supplicant on interface wlan0 via ndiswrapper. Its wireless because the location I need the printer in is really inconvenient to have to run wires to, or I wouldn't have this problem.The box is running ubuntu server 10.10, with only ndiswrapper and the associated utils and wpa_supplicant installed in addition to the default packages required for file/print/web serving. (there may be a few trivial packages like Vim that should have no effect whatsoever.)Basically, wpa_supplicant associates fine with the AP, but I can't get any elegant way of getting a IP address with it, DHCP or static makes no difference. My current fix is my rc.local file has:
Code:
sleep 60
dhclient wlan0
[code]....
Ubuntu 10.10 - the Maverick Meerkat � (Installed .iso from cd)The router has a password that I'm not sure if is wep or wpa.When I manually put in the address, netmask,gateway, dns,domain my Realtek usb adapter is connecting to the router but is not receiving packets.I got the driver installed with ndiswrapper.I'm trying to figure out wpa_supplicant
View 5 Replies View RelatedI have a laptop with ipw3945 on. I don't want to use Network Manager. this is my wpa_supplicant.conf
PHP Code:
[code]....
I do as root:
PHP Code:
[code]....
In another terminal as root I do:
PHP Code:
[code]...
but no IP address got.
I've got my laptop working with my UNI's rather complex wifi setup.
I need to get access to my wpa_supplicant file so i can use it with my nook and a few other devices that i need to get wifi access.
Network manager, i know, does all the wpa stuff dynamically and through scripts, so is there any way that i can get network manager to generate my wpa_supplicant config?
I'm using wpa_supplicant to get wireless working on my HP nc6320.Following that article how-to-install-intel-pro-wireless-3945-on-centos-linux) I was able to use wirelesssince 5.1 but when I've upgraded from 5.2 to 5.3 there some problem came with wpa_gui:[root@localhost]# service wpa_supplicant startStarting wpa_supplicant: /etc/wpa_supplicant/wpa_supplicant.conf -ieth1 -Dwext Device eth1 kernel driver name: ipw3945 [ OK ]
[root@localhost]# ll /var/run/wpa_supplicant/
total 4
srwxrwx--- 1 root wheel 0 Apr 5 20:50 eth1
[code]....
I'm trying for some time to configure my WIFI on my laptop, without success .
My router: TRENDnet TEW-432BRP
SSID: MINETTI
Channel: 6
Extended Range Mode: disabled
[code]....
I'm trying to manually connect my wireless adapter to my router using WPA. I'm using Madwifi drivers for my D-Link DWL-G630. I keep getting the same error " Association request to the driver failed". I can connect to my router using wep through the GUI. I can not connect using the terminal. I created my /etc/wpa_supplicant.conf file
ap_scan=1
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="NYNET"
scan_ssid=0
[code]....
I run these two commands
sudo ifconfig wlan3 down
sudo dhclient -r wlan3
the I run
sudo wpa_supplicant -Dwext -iwlan3 -c/etc/wpa_supplicant.conf -dd
jmorales@jmorales-laptop:~$ sudo ifconfig wlan3 up
jmorales@jmorales-laptop:~$ sudo dhclient -r wlan3
Internet Systems Consortium DHCP Client V3.1.2
[code].....
I'm struggling to get up an wireless card (EDIMAX PCI adapter based on Ralink RT2561/RT61 802.11g chipset). So far, so good, I manage to install ralink drivers:
# lsmod | grep rt61
rt61 220296 0
# iwconfig
lo no wireless extensions.
wlan0 RT61 Wireless ESSID:"DiamondAccess" Nickname:"localhost.localdomain"
Mode:Managed Frequency:2.412 GHz Bit Rate=54 Mb/s
[Code]...
yesterday i update my ubuntu 10.04 lts, and began the problens. i am using 2.6.32-24-generic, in a HP DV6 2145es do we know?
syslog saidme: wpa_supplicant[1093]: Association request to the driver failed search in google i founded that the problem is possible that it is in wpa_supplicant.conf. my fiel is in : /etc/dbus-1/system.d/wpa_supplicant.conf and i think that is necesary be in /etc . it is truh? when i check my fiel, i founded this:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
[code]....
I have heard the wpa_supplicant in roaming mode, although absent from the various Debian (and Debian-related) forums and wikis, can handle automatic connections to a variety of encrypted and open networks as well as network-manager does... and better when using the MadWifi drivers!
View 1 Replies View RelatedI have tried different methods to auto start wpa_supplicant at boot on Ubuntu Lucid server on a laptop which can't be connected to Ethernet.
The only thing that worked is adding the wpa_supplicant command before exit0 in rc.local. It solve my problem of wpa_supplicant auto start and annoyance on not be able to ssh before local login. But the screen stuck at Ubuntu Logo. How can i get pass Ubuntu logo screen to regular tty or xbmc in future?
[URL]
EDIT 6 Dec: More detailed log from wpa_supplicant I'm using Ubuntu Studio 10.10 x64. I want to get wireless networking going manually. My wireless networking works successfully in Windows 7 x64. I can get it working successfully without encryption but when I try and use WPA-PSK, wpa_supplicant gets stuck in a loop between GROUP_HANDSHAKE and COMPLETED, as shown in the log below.
I've been working mostly off the instructions in this post: [URL]... My laptop is a Dell Studio 1537. It has an Intel Wifi 5100. I'm connecting to a F5D7633-4 router running F5D7633-4Av1_UK_1.00.010 firmware, which is the latest version of the firmware I can find. When I set up WPA, it uses encryption technique TPIK. The other generic information is
Code:
$ iwconfig wlan0 up
04:00.0 Network controller: Intel Corporation WiFi Link 5100
$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:074f Microsoft Corp.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...