Slackware :: No Wireless Networks Detected In -current After Upgrade Of Wpa_supplicant
Feb 25, 2011
I am running -current on an ASUS eeePC 1000HE. Wireless was working fine up until the time I applied the latest changes from the Slack -current tree, which upgraded wpa_supplicant. Now, no networks are detected.
I looked at some related threads here and did some basic checking: neither the eth1 nor wlan0 interfaces show up in iwconfig or ifconfig output. Am afraid I am still a wireless dunderhead and don't know where to start troubleshooting this issue.
View 8 Replies
ADVERTISEMENT
Mar 13, 2015
I am running debian testing dist-upgraded to sid with the latest gnome-shell. All is fine, I have recently moved to a new house and noticed that network manager wont detect my home wireless network. It does scan for networks and locates SSIDS from other local networks including my neighbours wifi where I can connect but will not detect mine. The modem router used is a zte quite popular in Greece and I have the broadcom wl driver installed. By the way since it is a dual boot machine - nasty win7 connect just fine and so does my mobile phone...
View 3 Replies
View Related
Feb 14, 2010
I have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies
View Related
Apr 5, 2010
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies
View Related
Nov 21, 2010
I've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies
View Related
Apr 26, 2011
I've used this computer to connect to a wireless router before. I recently moved and for some reason it isn't working.I have a too long of an lspci output to type (I'm on a different computer).
View 1 Replies
View Related
Apr 23, 2010
No wireless upon re-installation of 9.10 Drivers seem installed. No wireless networks detected. code...
View 6 Replies
View Related
Oct 7, 2010
i installed backtrack recently....and wireless networks are not detected.... which deb to install because it is based on ubuntu 8.10
View 1 Replies
View Related
Jan 29, 2011
I have a msi netbook with ubuntu netbook remix installed and it was working great until yesterday when suddenly it stopped detecting my home network. There are no problems on my two other machines, so I'm sure the problem is the netbook. I have no idea how to go about troubleshooting this. I was hoping someone could help me by giving me a place to start.
View 2 Replies
View Related
Jun 5, 2011
I have ubuntu 11.04 installed. I have a D-link USB Wireless Adapter. Ubuntu detected it and it worked fine. I have a Beetel 450TC1 Router which broadcasts my internet connection. Ubuntu recognizes it, and keeps on trying to connect.It asks me for Authentication again and again.( Don't tell me to check the password again, it does work on everything else )And its not the router problem also, as I tried broadcasting through a laptop I have, Ubuntu again detected but couldn't connect and kept asking me for Authentication
View 2 Replies
View Related
Jun 29, 2010
No wireless networks detected with AR5001 chipset
View 1 Replies
View Related
Jul 27, 2011
New Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.
View 9 Replies
View Related
Aug 11, 2009
My wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
View 1 Replies
View Related
Mar 5, 2011
I'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.
View 7 Replies
View Related
Mar 21, 2011
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
View 2 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Mar 9, 2010
I wanna upgrade one of my 13 installs to current and was wanting any tips, etc and whether I should do it?
View 7 Replies
View Related
Jan 2, 2011
Is there any chance we'll see the newer version of Audacious (2.4.2) in -current, or is it too late in the day? If I get time, I may try building it on my -current install.
View 14 Replies
View Related
Mar 3, 2010
i can start X with the nvidia module, the log here:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/slacker:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.7.5
Release Date: 2010-02-16
[Code]...
View 10 Replies
View Related
Jan 20, 2011
I'd have said SNAFU, but the truth is that I really don't recall this mess being "normal" in Slackware since v7. This kind of mess is what I expect from Ubuntu, not Slack. Here's what happened. I was running Slackware-Current 12/10/10 and wanted to move up to Current 1/10/11. I read and followed the UPGRADE.txt including running "telinit 1". The system had 2 working kernels menued in Lilo, a custom 2.6.35.10 symlinked to "/boot/vmlinuz", and a custom 2.6.36 fully declared in lilo.conf and labelled Current.
The "upgradepkg --install-new" installed a "new" kernel which would only have required a simple deletion, but somehow and for some silly reason my lilo.conf was overwritten and lilo run so that when I selected "Current" instead of my nice 2.6.36, long story short, I got a badly working kernel where my keyboard didn't work.
Why would "upgradepckg --install-new" install an older kernel, and more importantly, instead of merely as an added option, override and ruin my existing, working lilo? Slax is overhauling to add pacman and I see some people even here leaning toward more automated package management in Slackware. What gives? Is Slackware headed down this path? Please, Joe, just tell me it ain't so.
View 7 Replies
View Related
Nov 15, 2010
I've (almost successfully) upgraded my 64-current.
1. It used to be or is? 64-current multilib, however, before the upgrade I commented out any blacklisted packages in slackpkg's blacklist file (including aaa_eflibs)
slackpkg update, install-new, upgrade-all, clean system (removed all the packages that were specified in changelogs.txt as removed)
When started X two things were wrong.
1. XFCE icons disappeared
2. The mouse pointer was going crazy
2. I fixed it by following Eric's advice and created a file in /etc/X11/xorg.conf.d/20-mouse.conf where I put the Input section from my xorg.conf
I'm still at loss when it comes to the icons.
btw, I've reinstalled my nvidia binary blob, somehow it doesn't seem to see it. Does the new Xorg use xorg.conf anymore?
View 4 Replies
View Related
May 15, 2010
I'm using Slackware current. I've updated my current after about two months from the last update, and since there was a huge number of changes I'm having some problems. In particular, I've forgot (my fault!) to give a "slackpkg install-new" before rebooting, so now I'm getting stuck...
Installpkg now claims a "rev" command, but I cannot figure how to find it, since the Slackware package browser on the website is still broken (when will it be available?!?!). Now, each time I try to install or upgrade a new package, I get this error:
/sbin/upgradepkg: line 41: rev: command not found
/sbin/installpkg: line 59: rev: command not found
Where can I find the package containing "rev"?
View 2 Replies
View Related
Jan 20, 2010
First: I upgraded my slackware 13.0 last night (Philippine time) to -current. I just download the while current tree (except for source) and copied to my home dir, then do the slackpkg commands.
#1 Added a mirror to my home directory pointing the slackware-current tree.
#2 slackpkg update
#3 slackpkg install-new
#4 slackpkg upgrade-all
#5 slackpkg clean-system
#6 lilo was configured
#7 reboot
It successfully upgraded. Although I'm aware that I have installed openchrome driver and drm kernel module when it was slackware 13.0.
After a reboot, it crashes in between the boot time, if I was not mistaken, I read ACPI something on the bottom of the console, then the screen flickers and goes blank. It locks up there.
By the way, it is a laptop with VIA chipset on it.
(Using the Slackware 13.0 DVD, I booted using hugesmp.s root=/dev/sda3 rdinit= ro for the rescue.)
Trying to fix it by myself (no internet at home) I tried to look at /var/log/messages and cannot find what is the cause (newbie mode). I also tried to disable some services such as hald, httpd, mysqld, bluetooth, wicd, wireless, the old kernel and some others at /etc/rc.d/ by removing the execute bit.
After a restart, still the problem exists.
Now, I finally backup the whole home dir, moved to home-bak and decided to install the fresh slackware-current instead.
Second: I used the 13.0 installer, then setup slackware using the pre-mounted directory containing the slackware-current tree. I only deleted the files except for home-bak and not reformat the drive.
It actually installs, but after the reboot (using the new 2.6.32.3 kernel), still the problem persists.
View 9 Replies
View Related
Mar 3, 2010
I recently upgraded my -current box, and now when I try to run sbopkg I get the exact error described in the following thread:[URL].. The error fwiw is as follows:
root@catbutt:~# sbopkg
ERROR
sbopkg: Invalid repository descriptor
Line
SBo 13.0 "SBo repository for Slackware 13.0" _SBo rsync slackbuilds.org::slackbuilds/13.0 GPG
of
/etc/sbopkg/repos.d/40-sbo.repo
specifies an unknown fetching tool (rsync).
seems likely given the discussion in that previous thread that the bash upgrade (to 4.1.002) in the recent -current onslaught is responsible?
View 6 Replies
View Related
Feb 25, 2010
I'm about to attempt to upgrade gtk+2 from the current 2.14 to 2.16 to fulfill a requirement for devede, I'm planning on using the slackbuild from slackware/l/gtk+2 and just editing the version. I think this approach will work but I was hoping to get some feedback (and any warnings or advice) before I dive in - obviously I will back up before hand.
View 4 Replies
View Related
Sep 3, 2010
I thought I would try out Eric's KDE 4.5.1 and Robby's new Xorg pacakges. The upgrade went off with out a hitch, but now when I try to launch conky I get
conky: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory
So I rebuilt conky and reinstalled libmowgli ran ldconfig but I still get the error.
View 4 Replies
View Related
Dec 11, 2010
After upgrading to -current (using slackpkg), my touchpad scrolling won't work.I remember that this had solved my problem previous time and in fact, after upgrade I have changed nothing (since this file already existed there). When I check the /usr/share/hal/fdi/ policy/ 10osvendor/ directory, I see that no "11-x11-synaptics.fdi" file was present. I just copied the file from /etc/hal/fdi/policy into this directory, but this did not help. Can somebody guide me through this?
View 14 Replies
View Related
Mar 3, 2010
After the updates galore of yesterday in -current, I began to update my system using slackpkg. However, after upgrading the kernel packages, I had a power problem and the system went down. (I had run lilo first, before the blackout happened) Upon powering it on again, my system won't boot. The kernel loads, and then init takes control, but when it comes to the regular fsck, the boot halts with a big, scary warning message that the filesystem might have an error and libblkid.so.1 is missing.
Be advised that the packages in the big update of yesterday were installed on alphabetical order. An inspection on the Jan 25-updated version of Slackware-current on my laptop reveals that the library in question is part of e2fsprogs. That's odd; if there was an update for it, it should already have been installed, but the system complains that a file from that package is missing, anyway. All this boils down to: my system is now unusable, unable to boot, and I really don't have a clue on what to do.
View 2 Replies
View Related
Dec 8, 2010
I just installed current to my Acer Aspire one 110 netbook that wasrunning 13.1 just fine until this morning. Everything works except the wireless connection. I cannot set the wlan device to go "up", iwlist scan returns "network is down" and ifconfig wlan0 up returns "Operation not possible due to rf-kill".Using the hardware switch makes no difference (it was working before upgrading). I made a clear install. The wlan devices uses the ath5k driver.
Edit: I installed the madwifi driver and nothing changed. After following a "google suggestion" to remove all power from the netbook and try again i can connect using the madwifi driver but not using the ath5k. Still I cannot get the switch to work.
View 10 Replies
View Related
