right now im using the nm-applet but i dont like it. it produces lags. i think the periodical ssid/broadcast check might be the cause :/it lags every minute or so...in games and skype it is very annoying! if there is a possibily to disable these scans in nm-applet it would be fine too.for the moment im "using" this wpa_supplicant config:
Code:
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
[code]....
I want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
Result : I can't modify my WLAN-Connection.
I'm trying to set up a PAN between two laptops to use as a transport for layer 3 communication..my problem is that it just doesnt work.
View 1 Replies View RelatedI used to be able to connect to the wireless but recently Ubuntu has gone waywards on me.How do I find out what wireless hardware I have? How do I get the right driver for it?Currently I can identify the wireless but cannot connect. Connecting with Ethernet works.
View 4 Replies View RelatedAfter upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed. Computers behind my ubuntu router can ping it, have access to it (apache, samba, etc.). Only internet isnt forwarding. Clients configuration is the same as before upgrade.
View 2 Replies View RelatedMy friend has 2 pcs, one connected to the internet and the other one used to connect (when he had windows installed) to the internet through the first one using internet sharing, now i installed ubuntu on both and the network between them has been created but it wont connect, the internet icons just animates for like a minute then says "wired internet disconnected" in other words it failed to connect.
View 1 Replies View Relatedgenerally whenever there is a wifi connection available fedora will detect and i can establish the connection but today i am not able to see any such wireless network available. I am in a wifi accessible area and i need to know how this can be rectified. i tried iwlist scan in the terminal but that doesnt seem to work
View 1 Replies View RelatedI am trying to use CentOS 5.4 to set up a secure laptop, largely because of it's SELinux functionality. Unfortunately I couldn't get wireless to work properly using the default NetworkManager so I installed wicd. Initially it buggered up my whole installation but after relabelling files using SEL I can now use my system again. but.. I can't use it with SELinux enabled, as it denies the required accesses for wicd to work. I also get similar SELinux denials for wpa_supplicant. A couple of snippets from /var/log/audit/audit.log -
[Code]....
for weeks now I have the following problem: I am not able to connect to my wireless home network for most of the time. I am using Ubuntu 10.04; an Intel Wifi AGN4965 card and as driver "iwlagn". Maybe the solution lies within these messages (from daemon.log):
Sep 20 22:03:35 ubuntu NetworkManager: <info> starting...
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Found user 'avahi' (UID 104) and group 'avahi' (GID 111).
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Successfully dropped root privileges.
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: avahi-daemon 0.6.25 starting up.
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Successfully called chroot().
[Code]....
Ubuntu 10.10 - the Maverick Meerkat � (Installed .iso from cd)The router has a password that I'm not sure if is wep or wpa.When I manually put in the address, netmask,gateway, dns,domain my Realtek usb adapter is connecting to the router but is not receiving packets.I got the driver installed with ndiswrapper.I'm trying to figure out wpa_supplicant
View 5 Replies View RelatedI start to learn wpa_supplicant recently,and I got the code already,but the code is complicated,and I don't know how to start learning,and Is there any book to discuss the architecture about wpa_supplicant?
View 4 Replies View RelatedI've got my laptop working with my UNI's rather complex wifi setup.
I need to get access to my wpa_supplicant file so i can use it with my nook and a few other devices that i need to get wifi access.
Network manager, i know, does all the wpa stuff dynamically and through scripts, so is there any way that i can get network manager to generate my wpa_supplicant config?
I am trying to get a wlan connection using my new Wlan-Stick. It has a Atheros ar9271 chipset.
Code:
Bus 001 Device 002: ID 0cf3:1006 Atheros Communications, Inc. TP-Link TL-WN422G v2 802.11g [Atheros AR9271]
Modules ath9k_htc and ath9k_htc_common are loaded. I can scan for network using iwlist or airodump and get the whole lists of networks. I've copied the config file I use with wpa_supplicant from a working system:
Code:
network={
ssid="Pasta"
scan_ssid=1
key_mgmt=WPA-PSK
[code]....
But I am not able to successfully connect:
Code:
[vortexbox.localdomain ~]# wpa_supplicant -i wlan0 -c wpa.test.conf -Dwext
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Device or resource busy
[code]....
the "pre-shared key may be incorrect" I have rechecked the key twice and it is correct (actually it cannot be wrong because they file was copied from a working system). I have also tried to connect to a WEP encrypted network using iwconfig without success. I get no error when connecting but iwconfig tells me "Access Point: Not-Associated".Because of the "Device or resource busy" I tried a "lsof | grep -i wlan" but there are no results.
if the NetworkManager uses wpa_supplicant? I normally dont use NetworkManager and decided to try it. I started it and tried it out and it works with WEP and WPA! I cant figure out why using the iwconfig command is not working by itself for WEP. WPA working with NetworkManager is just a bonus though.
View 4 Replies View RelatedI am using 8.04 Sometimes, when I start some video or audio file, I cant hear the sound. Even if it is working some time back. Then it starts all of a sudden or mostly I need to do a restart.
View 2 Replies View Relatedwhen i go to ccsm and activate any setting it doesnt seem to take affect....
View 1 Replies View Relatedi've come to replacement my 80 yr old fathers win98 machine with lucidFirefox 3.6.3 says 'connecting to .....' when accessing a webpage (eg his home igoogle page,bbc.co.uk ) and then times out .It all works with opera and links2 and pings are the usual times and its doing DNS . I've added 4.4.4.4 and 8.8.8.8 to /etc/resolv.conf for good measure FF its configured NOT to use a proxy ( Im fed up looking and checking !) and ive tried the 'detect settings automatically'this is a 'mission critical' step. Going to linux is a big enough change , so getting FF working will be a deal-breaker
View 3 Replies View Relatedi'm havng issues
Code:
bahie@bahie-laptop:~$ sudo apt-get install screenlets python-rsvg
[sudo] password for bahie:
Reading package lists... Done
Building dependency tree
Reading state information... Done
python-rsvg is already the newest version.
[Code]...
When I run wpa_gui I get a "Failed to open control connection to wpa_supplicant." message and an endless stream of "PING failed - trying to reconnect". I'm sure wpa_supplicant service is running, it also seems to be working correctly (program logs show activity when I connect to a wpa secured network via gnome network manager).
The location that ctrl_interface (in /etc/wpa_supplicant/wpa_supplicant.conf) points to (/var/run/wpa_supplicant) is an empty folder. I'm able to connect to a simple WPA network at home, but the one at my university needs special configuration and I couldn't get it to work by editing the .conf file. That's why I need the gui. My network card is Atheros Communications Inc. AR928X Wireless Network Adapter, the driver is ath9k.
It tells me (as in speaks to me) to go looking in the logs but they are all blank.
View 4 Replies View Relatedcd /Desktop/ ??
I can change to just about any dir of my file system with cd /filename/
eg cd /var/ or cd /opt/
it will skip me up or down the tree to get there but when if go cd /Desktop/or cd /myuseraccount/
is get: bash: cd: /Desktop/: No such file or directory
i have to be right next to the directory to get there.i dont get it. why is this?
I have a computer that i wish to install ubuntu 10.04 on, it wont install tho, it tells me that it cant detect the cd rom (the drive it is booting from) and that i should insert a removable device with the drivers on it, except i dont have those and don't know where to get them. i cant boot from a usb but i have a usb with 10.04 on it just incase. i tryed this with both alternate install and desktop. i dont know what to do, i have invested 2 days to try and do this and i would really like to put this on my computer.
I have previously installed 8.04 on my computer with out such error and all of the hardware is the same (even the hard drive), and i lost the 8.04 disk. <(it was a live disk)
I am running xubuntu 11.04 (ISO from early this week). During install, I selected to NOT auto login but to present this gdm panel where I have to enter the password (or other users could log in).
Now I decided to enable auto-login (and to start the screensaver right afterwards) ... so I opened up the "login screen settings" (systems menu), unlocked that window and changed it to "login as xxx".
Then i rebooted and would have expected to be greeted with my screen saver on a logged-in session afterwards. But what happens is that there is a gdm panel sitting ... showing me
AUTOMATED login
Other
Where the first item wont do anything.
So I have to select other and enter user name + password ?
Is that how it is supposed to work?
yesterday i update my ubuntu 10.04 lts, and began the problens. i am using 2.6.32-24-generic, in a HP DV6 2145es do we know?
syslog saidme: wpa_supplicant[1093]: Association request to the driver failed search in google i founded that the problem is possible that it is in wpa_supplicant.conf. my fiel is in : /etc/dbus-1/system.d/wpa_supplicant.conf and i think that is necesary be in /etc . it is truh? when i check my fiel, i founded this:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
[code]....
I have a laptop with ipw3945 on. I don't want to use Network Manager. this is my wpa_supplicant.conf
PHP Code:
[code]....
I do as root:
PHP Code:
[code]....
In another terminal as root I do:
PHP Code:
[code]...
but no IP address got.
I'm using wpa_supplicant to get wireless working on my HP nc6320.Following that article how-to-install-intel-pro-wireless-3945-on-centos-linux) I was able to use wirelesssince 5.1 but when I've upgraded from 5.2 to 5.3 there some problem came with wpa_gui:[root@localhost]# service wpa_supplicant startStarting wpa_supplicant: /etc/wpa_supplicant/wpa_supplicant.conf -ieth1 -Dwext Device eth1 kernel driver name: ipw3945 [ OK ]
[root@localhost]# ll /var/run/wpa_supplicant/
total 4
srwxrwx--- 1 root wheel 0 Apr 5 20:50 eth1
[code]....
I'm trying for some time to configure my WIFI on my laptop, without success .
My router: TRENDnet TEW-432BRP
SSID: MINETTI
Channel: 6
Extended Range Mode: disabled
[code]....
I found some code and tuts that tell me how to create a playlist, and I followed it to the letter but it doesnt work...I'm guessing it has somethin to do with my configuration settings with apache, otherwise here's the code:
Code:
So inside the m3u file the code is:
Code:
I installed linux on my imac G5(i did not dual boot) and now i want to install os x again on my mac but when i try to boot the installation cd it doesnt work.
View 9 Replies View RelatedI have ubuntu (gnome) but I prefer to use Kile as tex editor. Since maverick, the side symbols tool box stopped working.I click, double-click ou press return but the symbol code (e.g. cup ) is not inserted in the text.Does any one have the same problem? How can I fix it?
View 9 Replies View Related