Ubuntu Networking :: Wpa_supplicant Loops Between GROUP_HANDSHAKE And COMPLETED: Intel Wifi 5100 & Belkin?
Nov 26, 2010
EDIT 6 Dec: More detailed log from wpa_supplicant I'm using Ubuntu Studio 10.10 x64. I want to get wireless networking going manually. My wireless networking works successfully in Windows 7 x64. I can get it working successfully without encryption but when I try and use WPA-PSK, wpa_supplicant gets stuck in a loop between GROUP_HANDSHAKE and COMPLETED, as shown in the log below.
I've been working mostly off the instructions in this post: [URL]... My laptop is a Dell Studio 1537. It has an Intel Wifi 5100. I'm connecting to a F5D7633-4 router running F5D7633-4Av1_UK_1.00.010 firmware, which is the latest version of the firmware I can find. When I set up WPA, it uses encryption technique TPIK. The other generic information is
Code:
$ iwconfig wlan0 up
04:00.0 Network controller: Intel Corporation WiFi Link 5100
$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:074f Microsoft Corp.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
View 1 Replies
ADVERTISEMENT
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Mar 10, 2010
I've got a Dell precision with Kubuntu 9.10. Wifi worked fine on that machine for months, but stopped working last week. I don't know what happened, but I recently did an "apt-get dist-upgrade". That might have something to do with it.
When I boot in Windows, wifi works fine.
Code:
tijl@Smaug:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 82567LM Gigabit Network Connection
[Code]....
View 9 Replies
View Related
Sep 20, 2010
my platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
View 3 Replies
View Related
Nov 24, 2010
I'm using a Vaio TT, which seems to use an Intel 5100 WiFi chipset, and a Linksys WRT54G2 (firmwares 1.0.1 and 1.0.4), ubuntus 10.10 and 10.04.
Wifi works fine out of the box. However if the other vaio tt in our office (running windows 7) comes online, my laptop stops being able to make new connections. It WILL stay connected to chat servers, and downloads SOMETIMES continue to work. However all new HTTP requests / ssh connections / rdp connections / pings fail. The laptop still appears to be "connected" to the wifi network.
This may also happen after an undetermined amount of time without the extra vaio. It is not solved by reconnecting or rebooting. Once the extra vaio leaves the building, everything works fine again. This problem does not happen at all if I boot into windows.
View 4 Replies
View Related
Dec 4, 2010
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
View 4 Replies
View Related
Apr 9, 2010
Intel wifi link 5100 not found on sony vaio backtrack 4 vmware I use vmware to load backtrack I have a sony vaio with 5100 AGN wifi card installed in it. I had tried anything to make my wifi work but always show no interface no wireless. I googled it for help for weeks and all i get was download the iwlwifi things and i already installed in it. i even tried many other thing
/etc/init.d/wicd start
/etc/init.d/networking start
and everytime i type ifconfig it just show eth and lo and no wlan0 in it everytime i type airmon-ng there are no chipset interface and ...........thing (forgot) I could find my wireless card name when i type ilg... something i forgot The problem is,i think my linux doesn't reconize the card even i have installed the driver Anything that i can do to make my linux reconize wifi link 5100 agn wireless card?
View 7 Replies
View Related
May 2, 2010
I have backtrack 4 on vmware player.i have intel (R) wifi 5100 agn wireless card and when i type airmon-ng there is nothing shown on interface..and i have been told i need kernel rebuild..i have kernel 2.6.30.9 so how can rebuild it?
View 10 Replies
View Related
Jun 14, 2010
I have seen tons of threads on the internet about Ubuntu 10.04 having wireless issues but none of them have lead to me fixing the problem so I decided to come here. I have been able to connect to access points before but sometimes I have to reboot or reboot twice just to be able to see the wireless points and the enable wireless is always greyed out. And if I am connected to an AP or hardwire the connection drops frequently.
View 1 Replies
View Related
Apr 28, 2011
I'm trying to get my Dell Latitude work with wifi speed >54Mbit/s, and up to now without any success. The router is a Dlink DIR-635, it has 'n' enabled and working (got an apple laptop connecting at 130Mbit/s, can't test the actual throughput though, since it's the only high-speed device).
Here's the device data:
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Subsystem: Intel Corporation WiFi Link 5100 AGN
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code]...
I'm running 11.4, added the compat-wireless recently to be able to run the newes firmware (iwlwifi-5000-5.ucode , firmware version 8.83.5.1 build 33692), but still all I get is 54Mbit/s. I'd like to know if ANYONE ever got the 802.11n speed on linux, and in particular with these intel cards.
View 9 Replies
View Related
Jan 2, 2010
I have an Acer Aspire 6930 laptop that I'm setting up for my wife with Debian Lenny. It has an Intel 5100 wireless card. I'd like to get a driver for the card without having to install a new kernel.
View 11 Replies
View Related
Jan 26, 2010
I just did a dual boot with OpenSuSE 11.2 and Windows 7. They both work perfect but for some reason the wireless (intel wifi 5100 AGN) and my wired network card (Atheros AR8131 Gigabyte controller)do not work in opensuse. Now the problem is that I do not have a clue about linux and therefore I don't know how to fix the problem. I searched the forum and I tried these commands "sudo /sbin/ifdown eth0" and "sudo /sbin/ifup wlan0" and both says something like device not connected/present (can't remeber exactly).
View 9 Replies
View Related
Nov 5, 2010
I moved to Berlin recently and I got wireless internet through an access point. I'm supposed to use the laptop's built-in wireless netcard to access the internet. This usually works in windows (connection falls out from time to time), but I have yet to make it work in linux. I'm using OpenSuse 11.3 64-bit and the Knetwork manager. Most of the settings in the network manager are correct, but it keeps wanting to use system certificates for the server. By that I mean it keeps checking 'Use CA System certificates'.
So I can't choose the CA-certificate supplied by my internet provider. I keep removing the check-mark and pointing it to the 'hotzoneCA.der' certificate. I also got a 'personal' certificate, in lack of a better word. Its called 'jacob_collstrup.p12'. The Knetwork manager seems to accept the 'jacob_collstrup.p12' certificate, but not the other one.
I just put the certificates in a folder like this /jacob/home/hotzone/zertifikate/ I can see the network fine using the Knetwork manager, and the signal strength seems ok. Not too good, but it shouldn't be a problem. I might have messed up the system, since I first tried this guide, prior to experimenting with Knetwork Manager:
1. (had to run this one as su)
Code:
wpa_supplicant -w -i wlan0 -c /etc/wpa_supplicant.conf -Dndiswrapper -dd �t
2. (This was supposed to be put in a wpa_supplicant.conf file)
Code:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
opensc_engine_path=/usr/lib/opensc/engine_opensc.so
pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
[Code]...
View 9 Replies
View Related
Nov 9, 2010
I have a Dell Latitude E6500 running Opensuse 11.3. As far as I can tell the module for my wireless card is loaded correctly and it's working:
Code:
sudo lspci | grep -i wifi
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Code:
[ 556.642557] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 556.642560] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[Code].....
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
View 6 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
Aug 23, 2010
In simple, I have tried everything I can find on this issue, but I am still unable to get it working on my HP DV4 laptop. My laptop has a Intel 5100 wireless card, and it always says that wireless is disabled. Ive tried booting with the wireless switch off, with it on, ive reinstalled the driver and did everything in a post I found here (cant find a link) that basicly had me reinstall the driver from intels site, then reload the network manager, to no prevail. Im running ubuntu 10.4.1 (just installed), and this is really a big issue 4 me.
View 1 Replies
View Related
Sep 27, 2010
Recently got a Zareason Teo netbook. Wireless came disabled (huh?).
Using Ubuntu 10.4
Wireless: Intel Wireless WiFi Link 5100
iwconfig
lo no wireless extensions.
[Code]....
View 3 Replies
View Related
Dec 7, 2010
I have just switch to Ubuntu on my laptop from Windows 7 and I am experiencing alot of wireless dropping.
The signal itself is full and I am very close to the router.
What could be the issue and how do I go about rectifying it.
Laptop: Dell 13z.
Wireless: Intel 5100 agn
Ubuntu 10.10 x64.
View 5 Replies
View Related
Jul 26, 2009
how to set up wireless networks. The technical language is foreign to me. My notebook maybe described as follows:
Make and Model: SONY VAIO FW490
Processor: Intel� Core™ 2 Duo Processor P8700 (2.53GHz)
RAM: 4GB DDR2-SDRAM
Graphics card: ATI Mobility Radeon™ HD4650 graphics card with 512MB vRAM.
[code]....
It came pre-installed with Windows Vista Home Premium but now I have Fedora 11 (w/ Gnome) as the only OS. The router that I am using with an Ethernet cable connected to my laptop is a Netgear 54Mbps Wireless Router WGR614 v7 connected to a Motorola Surfboard Cable Modem. Both worked right out of the box and now I have wired Internet access. RCN is my ISP. I would like to avoid using the Ethernet cable connecting my laptop to the router.
This is what I have done so far:
1. Gone to System>Administration>Network
2. Clicked "New" then chose "Wireless connection" from the list
3. Chose Intel Corp. Wireless WiFi Link 5100 (wlan0) from list. The other option was "Other Wireless Card".
I don't know what to do after this. What should I choose in the windows entitled "Configure Wireless Connection" and "Configure Network Settings" ? I chose Ad-Hoc for mode and entered an SSID name even though I have no explanation for taking these actions. As for the other settings, I simply went with whatever was already selected. At the moment, I lose Internet access when I disconnect the Ethernet cable. I see other wireless networks when I click the network icon on the top right corner of the screen. I don't know how to make my router appear on that list if that's necessary.
View 3 Replies
View Related
Jun 4, 2010
Intel 5100 wireless card doesn't connect on 10.04?
View 1 Replies
View Related
Mar 12, 2010
For two days I've tried to get my new Belkin 7050 wifi stick up and running. No matter what I did nothing changed, at all. After close to 8hrs of straight trouble shooting I have made zero progress. Zero.
If you have a bunch of free time and want a project then feel free to play with this device. However if you're short on time or have work to get done just take it back to the store and get a different device.
Here's the over view of my situation :
- Ubuntu 8.04 : Device is detected. DHCP = Doesn't connect to router / get IP. Router can see device. Router has no security / password enabled.After several hours of trouble shooting Ubuntu I booted into win2k (supported by device)
- Win2k : Device is detected, official software installed. DHCP = Doesn't connect to router / get IP.
It does the exact same thing in Win2k as it does in Ubuntu. - Ubuntu 9.10 : Did a fresh install if 9.10 just to trouble shoot this problem. Symptoms are exactly the same. DHCP doesn't get an ip. There are no errors in /var/log/messages
- Ubuntu 9.10 : Blacklisted the regular drivers and did the ndiswrapper method, smooth sailing. After all is said and done it does the exact same thing. DHCP doesn't get an ip.
In all the trouble shooting I did (iwconfig, ifconfig, etc) I never received any error messages telling me that something had went wrong (besides the part where dhcp didnt get an ip).
[Code]...
View 4 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Jun 8, 2010
i am looking for any advice what tool to use for temperature monitoring on server dual xeon F29 board intel se7501wv2 running CentOS 5.5
View 4 Replies
View Related
Feb 5, 2010
I have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
View 11 Replies
View Related
Oct 1, 2010
I've installed firmware-iwlwifi I've modprobe -r'd and modprobed the iwlagn module I CAN scan, using iwlist wlan0 scanning, and I can see my essid, hovering in the distance. it is definitely broadcasting.
I use wicd and wicd-curses. No wireless show up in wicd-curses. ifup wlan0 gives me no dhcp offers received and slumbers again. from iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
from lspci:
03:00.0 Network controller: Intel Corporation WiFi Link 5100
View 11 Replies
View Related
Mar 22, 2010
I have Dell 1537 laptop having Intel 5100 wireless card. It is not supported by Fedora 9. I have tried downloading the driver iwlwifi-5000-ucode-8.24.2.12.tgz from URL...Downloads and copied it to folder /lib/firmware and rebooted the machine. But still it is not detected by the system. Is there any solution to this problem .
View 2 Replies
View Related
Nov 15, 2010
lspci | grep Network
Quote:
04:00.0 Network controller: Intel Corporation Wireless WiFi Link 510
uname -a
Quote:
Linux ubuntu 2.6.31-22-generic #68-Ubuntu SMP Tue Oct 26 16:37:17 UTC 2010 x86_64 GNU/Linux
[Code]....
Tried this to enable the wireless
ifconfig wlan0 up
View 2 Replies
View Related
Mar 24, 2010
For some reason I don't understand SUSE tells me there are no network devices available. I've checked for any 'firmware' and 'kill' in both boot.msg and hardware information. I've got an ACER Aspire 8935G with WiFi Link 5100 (Intel). The only info I found that could point to the reason is:
[Code]...
There is one more thing that could be related: I've got some touch-buttons to the left of the keyboard that turn wifi and bluetooth on/of. The bluetooth one works, but nothing happens if I press the wifi one.
I also know that this hardware worked on fedora 11 and 12, so it's probably only a matter of settings/additional packages. If you respond, please keep in mind I can't use any internet connection-based commands, as the system doesn't accept the hardware responsible for cable connections either. I can download files if needed.
View 3 Replies
View Related
Jul 25, 2010
I have an old Toshiba Satellite A30 Notepad. I've installed Ubuntu 10.04 onto it and everything but WiFi works. I've installed wicd and several other network tools but just can't get Ubuntu to let me use the WiFi connection (the option is greyed out).I know the card works because the last OS (Windows XP) used it without any problems. The card is detected, the drivers are installed and the hardware (slider) switch is set to on.I think the issue is related to the Radio Frequency Kill Switch being on but I don't know how to turn it off.The output from various commands are:
sudo lshw -C network is:
Code:
*-network:0
description: Ethernet interface[code]............
View 9 Replies
View Related
