Whenever I try to run startx as a regular user it sometimes executes and at other times it fails. I have to manually restart my machine. When it does execute, the window manager loads, but eventually freezes, and again, I have to reboot.
View 14 RepliesJust installed Slack-13.1 and it looks really good. At least as root. Problem is, I create a normal user, and when I log in as the user, startx just gives me a black screen.
View 2 Replies View RelatedI installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies View Relatedwhen i use the command startx my slackware goes to kde but when use X deos not. what is X command or whow i can make my X open kde with it
View 10 Replies View Relatedi've added a user using
useradd turf passwd turf and so on.. after loggin, i can't startx..
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
View 13 Replies View RelatedI'm running Slackware current, and just did a slackpkg upgrade. I can't startx. I get the following:
FATAL: Error inserting i915 (/lib/modules/2.6.33-smp/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel mode setting driver detected.
(EE) Screen(s) found, but none have a usable configuration
Is there any reason why PyGTK is still at 2.22?
There are warnings generated when using Matplotlib (though execution can continue).
Will we likely see an upgrade before 13.37?
ive used ubuntu and fedora before, but i asked around for the "best" linux distro and they told me slackware or archlinux so i desided to pick slackware ive installed it and when im in the console mode its the swedish keyboard settings, that i choose in the install but when i go into visual mode startx i dont have the swedish keyboard so i was wondering if eny of you know how to change it
View 3 Replies View RelatedThing is : I have an Install DVD created from current with the script from AlienBob about two months ago, I use it as my "default" Slackware64 13 install.
I had my drivers working ( KO modules loaded in kernel 2.6.29.6 ) I had to build for Broadcom Wireless and Nvidia GPU. Today I decided to make an upgrade w slackpkg, blacklisted kernel kernel headers, and everything pertaining to it. Still the damn thing installed 2.6.32.x. anyway, ran lilo to take notice of the change, and rebooted. booted allright, only when i Init 4, it failed to startx. new kernel, new mods needed to be loaded, i picked my DVD with drivers, and tried to run the Nvidia proprietary installer...
It uninstalled the previous driver and started compiling a new kernel module..I had the previous DVD installer of Slackware64 Current, as well as my private repo of packages, either built by me with src2pkg or makepkg, or from slackbuilds, I had my /home partition mounted apart, so i regenerated my system in about one hour...
Having slackware 13 after executing startx it gives me white screen. Heres log:
Code:
kephald starting up
XRANDR error base: 159
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 59 1024 x 768
RandRScreen::loadSettings - adding mode: 60 800 x 600
RandRScreen::loadSettings - adding mode: 61 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 57 on output "VGA" (previous 0 )
CRTC outputs: (58)
Output name: "VGA" .....
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
No battery found.
This is not a laptop, quitting ...
<unknown program name>(26219)/: Communication problem with "korgac" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
QProcess: Destroyed while process is still running.
Graphic card is intel 82865g
Video driver installed is 2.9.0 from robby workman,
Kernel is 2.6.32.3 generic
I recently installed Slackware 13. But every time I run startx I get my XFCE screen & it hangs up. Command line works absolutely fine.
View 6 Replies View Relatedi can't use kde because the startx and xorgsetup commands are not found (from root account). i know i installed x and kde, documentation doesn't say anything about specifying a path, locale and whereis don't show a path. what should i do?
edit: it also isn't found in /usr/bin/X11R6 or /usr/bin or /usr/bin/X11
I'm running Slackware 12.2 with wmii-3.9.2 as my window manager. My problem is that after startx wmii sometimes becomes unresponsive i.e., can't open xterm or any other program or even quit. have to use Ctrl+Alt+BkSpc.
"$ cat /var/log/Xorg.0.log | grep (EE)" returns nothing. Though after quitting X I often see XIO error 11 (resource temporarily unavailable) but I don't know if this was caused by killing X. Graphics card is nVidia ION. I'm using the latest and recommended driver from [URL](260.19.12). //for xorg.conf see at the bottom
It doesn't seem to be a hardware issue as all the hardware is working properly (dmesg reports nothing suspicious). /var/log/messages reports nothing unusual (except for some acpid messages but that's probably another story).
I suspect it's something to do with my xorg.conf and/or the DISPLAY variable and/or wmii (because Xfce4 does not freeze). echo $DISPLAY returns :0.0 but this value is set by startx/xinit anyway. So I'm lost at this point.
My xorg.conf is:
---------- BEGIN ----------
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen1"
InputDevice "Mouse1" "CorePointer"
[Code]....
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
I have just installed slackware. I have done
Code:
Xorg -configure
And chosen kde for init program while installing slackware. But when I type
Code:
Xorg -config -retro
or
Code:
startx
I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.
Kernel 2.6.21.5, GNU/Linux (Slackware 12.0)
xfce 4.4
Qt 3.3.8
KDE 3.5.7
KGet v. 0.8.5
I've just installed all of the packages in disks 1 and 2 of the slack 12.0 distro so, among them, I have the slack series kde/ installed. I run xfce as the desktop environment, which is able to run KDE apps. In main menu>Network there is kget, a download manager and also supposedly a p2p client. I ran it and it said "It is the 1st time you run kget. Do you want to make the default download manager?". I replied "No". As nothing happened I restarted X (the startx command ends up running xfce), ran kget again, and it made the same question, which this time I answered in the affirmative.
Again nothing happened. So I tried to download some file from the web, in the hope that a kget window would open. But no window opened nor anything else happened! In the console, I did 'ps -e' and there it was, however. So I began the search for documentation. First I ran khelpcenter, and was presented with the kget help. It was all about menus. However, typing kget --help-all in a console, gives almost two screens of information. And I tried several commands, from the GUI, following the syntax displayed by this command, but it was no use. So, I finally had to fall back on LQ, like so many times.
I put Slackware 13 and the scenarios is:
1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer,
2. Booting Windoze
3. Choose Restart not Shutdown from Windoze
4. Booting Slack
5. startx works fine, the X server is starting and working great.
I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.
64 13.1 it's patched to the very latest.I need my terminals. I use them. They do work until X is started.How do I get them to not go away when X is started?radeon 5450I added an append in lilo.conf ofvideo=radeonfbAnd I load the radeon module before I startx/sbin/modprobe radeonBut all of the tty(2 through 6) still disappear as soon as X is started.By "disappear", I mean that there's no cursor or text on the screen -- appears as if is in sleep mode but neither the mouse nor the keyboard -- IOW tty login remains not available.
View 2 Replies View RelatedI have installed Slackware and chose Xfce as my primer desktop. but when I run startx or startxfce4 xfce freeze during startup what to do?
View 14 Replies View RelatedSlackware 12.0 (GNU/linux kernel 2.6) I am said slackware is very stable (I suppose this means it has few bugs). However, every time I run startx to start the graphical interface, for a brief moment I can see (just before the screen is put in graphical mode) a lot of error messages. How can this be? I use slack 12 a lot and have reinstalled this distro many times. However the described behavior always repeats.
View 14 Replies View RelatedI've installed SalixOS LXDE and thought it was the best thing but... After I disabled almost all services except syslog, dbus, and hald while inside lxde desktop. I rebooted and my mouse and keyboard no longer worked. So then I booted my Slackware install and edited /etc/inittab on the salix partition so I could boot into init 3 (I kinda like init 3 more than 4 anyway). Booted back into salix and keyboard seems to work but gpm doesn't... Gpm can't find any mouse so I do an lsmod and there's only about 4 modules loaded? Crap... So I dig around /etc/rc.d folder and I think it's got to do with me disabling the udev services when everything was fine after a fresh install...
I ran the init script for udev but it does nothing... I also ran pkgtool and went to setup, selected services and hit enter but it jumps back to the main menu?! I don't know if that's a glitch or what but it won't even let me pick the services with pkgtool... So what can I do to change everything back to their default value? I only booted once into my new salix install, changed services, rebooted, and then problems... I really loved the way everything was working on my first boot. Salix is one of those distro's that really gave me a happy feeling with linux so I'd really hate to stop using it over this one wrong thing I did...
- is there a way to set the default user in console login so that all needed is to press enter(or event without it) to be able to input the password for that user - also is it possible to console login without password, by just inputting user name and pressing enter how to put startx for that user right on login, so that the user doesn't input the command manually
View 6 Replies View RelatedI have slackware64 current installed, my laptop have a nec pci express ubs3.0 port, but when I connect something width startx initiated my box freeze and the caplocks led start to blink, I think maye a kernel panic.
View 3 Replies View RelatedUpgraded to 'current' and now have a series of problems. First, when trying to 'startx' to fire up KDE I get the following error message, "Could not start d-bus. Can you call qdbus?" If I try Xfce it gives this similar message, "Failed to execute dbus-launch to autolaunch d-bus sessions. When logging in, but before entering the password this error message pops up:
'Dialups-check-enab'
'nologin-str'
'Configuration error - unknown item. (notify administrator)'
I would like to know what is the file I need to edit to change the "startx" command from starting kde. I would like for it to start gnome instead. I just cant seem to find it. I'm using slackware 13.0.
View 12 Replies View RelatedToday I installed Slackware 13 because of some issues I'd been having with slackware 9, which I'd gradually updated, but apparently not perfectly, hence the clean install of ver 13. Anyways, I have no sound. At first I thought I had no sound at all, but then I found out that audio does work for root. When I try to run alsamixer as a non-root user, I get this error:
Code: alsamixer: function snd_ctl_open failed for default: No such file or directory Now if I run it as root though, it works just fine. If I run the KDE system settings thing, what I guess is their version of the windows control panel, and I go to the multimedia section, I can see my card, but if I click test, it says that it's failed and that it's "reverting back to ." or something to that effect.(I'm in fluxbox right now). I would imagine that there's something I need to do with respect to modifying permissions, but I really don't know what that is that I'm supposed to do.
I can't run the "java" command as root, but I can, as a simple user.
View 2 Replies View RelatedWhen I try to run thunar,for example, as root i receive a :
Code:
bash-4.1# thunar
No protocol specified
[code]...
I got the mozilla FF4, extracted, copied to /usr/lib/firefox, changed the old one to /usr/lib/firefox-3 (I had the 3.03 or something like it) Now,I just can make it work... but just as root! If I am in Konqueror, super user, and click over the firefox it opens Firefox 4, as root. If I open another X, as root, I just need to click the old firefox icon and it opens. As user, there is no way I compared the files from /usr/lib/firefox, the new ones with the old ones in /usr/lib/firefox-3, and the permissions are THE SAME. I even tried to replace the firefox and the run-mozilla.sh, the only difference is that then I can get the update window to appear, but it does nothing and just crash. I didn't touched the /usr/bin/firefox, since it just point to the /usr/lib, and in fact, since it is working as root, in user space and in root KDE,it is OK. I tries first,of course, to get a slack one, but at linuxpackages there is only the FF4 for the newest slacks.
View 12 Replies View Related