ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
No battery found.
This is not a laptop, quitting ...
<unknown program name>(26219)/: Communication problem with "korgac" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
QProcess: Destroyed while process is still running.
Graphic card is intel 82865g
Video driver installed is 2.9.0 from robby workman,
Kernel is 2.6.32.3 generic
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
I have just installed slackware. I have done Code: Xorg -configure And chosen kde for init program while installing slackware. But when I type Code: Xorg -config -retro or Code: startx I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.
1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer, 2. Booting Windoze 3. Choose Restart not Shutdown from Windoze 4. Booting Slack 5. startx works fine, the X server is starting and working great.
I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.
1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
I'm running Slackware current, and just did a slackpkg upgrade. I can't startx. I get the following: FATAL: Error inserting i915 (/lib/modules/2.6.33-smp/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format (EE) intel(0): No kernel mode setting driver detected. (EE) Screen(s) found, but none have a usable configuration
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
ive used ubuntu and fedora before, but i asked around for the "best" linux distro and they told me slackware or archlinux so i desided to pick slackware ive installed it and when im in the console mode its the swedish keyboard settings, that i choose in the install but when i go into visual mode startx i dont have the swedish keyboard so i was wondering if eny of you know how to change it
Thing is : I have an Install DVD created from current with the script from AlienBob about two months ago, I use it as my "default" Slackware64 13 install.
I had my drivers working ( KO modules loaded in kernel 2.6.29.6 ) I had to build for Broadcom Wireless and Nvidia GPU. Today I decided to make an upgrade w slackpkg, blacklisted kernel kernel headers, and everything pertaining to it. Still the damn thing installed 2.6.32.x. anyway, ran lilo to take notice of the change, and rebooted. booted allright, only when i Init 4, it failed to startx. new kernel, new mods needed to be loaded, i picked my DVD with drivers, and tried to run the Nvidia proprietary installer...
It uninstalled the previous driver and started compiling a new kernel module..I had the previous DVD installer of Slackware64 Current, as well as my private repo of packages, either built by me with src2pkg or makepkg, or from slackbuilds, I had my /home partition mounted apart, so i regenerated my system in about one hour...
Just installed Slack-13.1 and it looks really good. At least as root. Problem is, I create a normal user, and when I log in as the user, startx just gives me a black screen.
i can't use kde because the startx and xorgsetup commands are not found (from root account). i know i installed x and kde, documentation doesn't say anything about specifying a path, locale and whereis don't show a path. what should i do?
edit: it also isn't found in /usr/bin/X11R6 or /usr/bin or /usr/bin/X11
Whenever I try to run startx as a regular user it sometimes executes and at other times it fails. I have to manually restart my machine. When it does execute, the window manager loads, but eventually freezes, and again, I have to reboot.
I'm running Slackware 12.2 with wmii-3.9.2 as my window manager. My problem is that after startx wmii sometimes becomes unresponsive i.e., can't open xterm or any other program or even quit. have to use Ctrl+Alt+BkSpc.
"$ cat /var/log/Xorg.0.log | grep (EE)" returns nothing. Though after quitting X I often see XIO error 11 (resource temporarily unavailable) but I don't know if this was caused by killing X. Graphics card is nVidia ION. I'm using the latest and recommended driver from [URL](260.19.12). //for xorg.conf see at the bottom
It doesn't seem to be a hardware issue as all the hardware is working properly (dmesg reports nothing suspicious). /var/log/messages reports nothing unusual (except for some acpid messages but that's probably another story).
I suspect it's something to do with my xorg.conf and/or the DISPLAY variable and/or wmii (because Xfce4 does not freeze). echo $DISPLAY returns :0.0 but this value is set by startx/xinit anyway. So I'm lost at this point.
My xorg.conf is: ---------- BEGIN ---------- Section "ServerLayout" Identifier "Simple Layout" Screen "Screen1" InputDevice "Mouse1" "CorePointer"
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
Kernel 2.6.21.5, GNU/Linux (Slackware 12.0) xfce 4.4 Qt 3.3.8 KDE 3.5.7 KGet v. 0.8.5
I've just installed all of the packages in disks 1 and 2 of the slack 12.0 distro so, among them, I have the slack series kde/ installed. I run xfce as the desktop environment, which is able to run KDE apps. In main menu>Network there is kget, a download manager and also supposedly a p2p client. I ran it and it said "It is the 1st time you run kget. Do you want to make the default download manager?". I replied "No". As nothing happened I restarted X (the startx command ends up running xfce), ran kget again, and it made the same question, which this time I answered in the affirmative.
Again nothing happened. So I tried to download some file from the web, in the hope that a kget window would open. But no window opened nor anything else happened! In the console, I did 'ps -e' and there it was, however. So I began the search for documentation. First I ran khelpcenter, and was presented with the kget help. It was all about menus. However, typing kget --help-all in a console, gives almost two screens of information. And I tried several commands, from the GUI, following the syntax displayed by this command, but it was no use. So, I finally had to fall back on LQ, like so many times.
64 13.1 it's patched to the very latest.I need my terminals. I use them. They do work until X is started.How do I get them to not go away when X is started?radeon 5450I added an append in lilo.conf ofvideo=radeonfbAnd I load the radeon module before I startx/sbin/modprobe radeonBut all of the tty(2 through 6) still disappear as soon as X is started.By "disappear", I mean that there's no cursor or text on the screen -- appears as if is in sleep mode but neither the mouse nor the keyboard -- IOW tty login remains not available.
I installed backtrack4 (ubuntu based) few hours ago and i am facing a problem in getting into the graphical mode(live cd)!, hence I tried to check and run it in a "safe graphical mode" and unexpectedly it works fine! but when I switch to 1024x768 resolution in the same live cd ,and then when I type startx it just produces a black screen! After doing some research on finding a soultion to this problem I found out that this go to do some thing with editing the xorg.conf file! but when I type xorgconfig,it shows an error saying command not found!
sudo dpkg-reconfigure xserver-xorg command just talks about the keyboard! nothing interesting on graphics or screen section! resource: intel corporation 828456/gl 128 mb
I left slackware 13 with airodumb and airplay executed in console for 6 hours. When I got back, konsole had something similar to "packet has length error". I could open the packet using aircrack -m option, but when i shut down the OS, it didnt shut down properly. Now when I do startx black window stays forever. I tried pkgtool and change to KDE but the same happens.
Slackware 12.0 (GNU/linux kernel 2.6) I am said slackware is very stable (I suppose this means it has few bugs). However, every time I run startx to start the graphical interface, for a brief moment I can see (just before the screen is put in graphical mode) a lot of error messages. How can this be? I use slack 12 a lot and have reinstalled this distro many times. However the described behavior always repeats.
I've installed SalixOS LXDE and thought it was the best thing but... After I disabled almost all services except syslog, dbus, and hald while inside lxde desktop. I rebooted and my mouse and keyboard no longer worked. So then I booted my Slackware install and edited /etc/inittab on the salix partition so I could boot into init 3 (I kinda like init 3 more than 4 anyway). Booted back into salix and keyboard seems to work but gpm doesn't... Gpm can't find any mouse so I do an lsmod and there's only about 4 modules loaded? Crap... So I dig around /etc/rc.d folder and I think it's got to do with me disabling the udev services when everything was fine after a fresh install...
I ran the init script for udev but it does nothing... I also ran pkgtool and went to setup, selected services and hit enter but it jumps back to the main menu?! I don't know if that's a glitch or what but it won't even let me pick the services with pkgtool... So what can I do to change everything back to their default value? I only booted once into my new salix install, changed services, rebooted, and then problems... I really loved the way everything was working on my first boot. Salix is one of those distro's that really gave me a happy feeling with linux so I'd really hate to stop using it over this one wrong thing I did...
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
- is there a way to set the default user in console login so that all needed is to press enter(or event without it) to be able to input the password for that user - also is it possible to console login without password, by just inputting user name and pressing enter how to put startx for that user right on login, so that the user doesn't input the command manually
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx sudo service gdm start return = start: Job is already running: gdm
Just installed CentOS 5.5 in text mode because the GUI mode keeps hanging midway installation. The text mode installation worked sucessfully but when the installation finished and rebooted the system i got the localhost login thing which i typed root and provided my password,logged in successfully but then the cursor was just blinking waiting for the next command, i then typed startx but immidiatelythe screen goes blank and hangs. I guess the problem has to do with vga but i'm newbie and don't knw what next to do.
