Slackware :: "out-of-the-box" - Slack13.1 Nfsd Fatal Error
Jun 27, 2010
how stable I can pretend slackware 13.1 is.... Im getting my share of problems with an "out-of-the-box" supposely "stable" release of the OS... I'm trying to start the NFS daemon on the server and I get:
[Code]...
Now I understand I'm not the only one to have that problem... apparently something to do with a kernel problem or something like that. I've found a website where the site maintainer reported the same exact problem, but his solution worked for him, not for me (of course!)... [URL] Basically, he says that its a problem with modprobe or init and reverting to the older version 3.6 would do it. Here's what he did: He downloaded & "upgraded" module-init-tools-3.6-i486-2.txz
[Code]......
View 11 Replies
ADVERTISEMENT
May 24, 2010
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
View 2 Replies
View Related
Mar 13, 2010
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
View 3 Replies
View Related
Jul 2, 2010
I've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
View 10 Replies
View Related
May 31, 2011
I'm using Slackware 13.37 x64 (upgraded to slackware-current) and I have trouble compiling mysql workbench 5.2.34.
The error is:
Code:
scintilla-marshal.c:2:25: fatal error: glib-object.h: No such file or directory
But I have that glib-object.h file:
Code:
$ locate glib-object.h
/usr/include/glib-2.0/glib-object.h
This is when I try to compile version 5.2.27:
Code:
./PlatGTK.cxx:13:21: fatal error: gdk/gdk.h: No such file or directory
Code:
$ locate gdk.h
/usr/include/gtk-1.2/gdk/gdk.h
/usr/include/gtk-2.0/gdk/gdk.h
View 12 Replies
View Related
May 17, 2011
I am having a problem with my slackware version 12 server. I tried installing a new joomla theme from the rockettheme and its giving me the following error while loading the site.
Fatal error: Call to undefined function imagecreatefromjpeg()in /home/www/verticaltest/modules/mod_rokstories/thumbnail.inc.php on line 167
Thought it was a problem with gd library modules, but in info.php, its showing that gd is installed in the server. Pasting the result form info.php below..
If gd is installed, what should be the problem?
View 3 Replies
View Related
Mar 11, 2010
Is there any provision for the release of slack13.1?
View 14 Replies
View Related
Mar 18, 2010
For the heck of it (and because I wanted to see if it was possible) I booted to the Slack13 DVD to see if I would be able to install from an online source. I was actually surprised that I could. Why can I only select the A series to install from an online source? Does it have to do with bandwidth considerations? I'm curious for if I wanted to install -current to begin with instead of just upgrading to it.I don't want to have to download all the packages. Just let it install from the net.
View 14 Replies
View Related
Sep 22, 2010
I have 3 accounts setup on this machine. One is root, one is my own, and one is for my kids. My account and root work fine, but today when I tried to log my kids on, startx fails (it also fails from runlevel4). I have tried creating new accounts and they fail as well. I'm not sure when the issue started, but it's been less than a week I believe. The consistent error which I receive is
Quote:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices.
View 3 Replies
View Related
Feb 1, 2011
I am on a slackware13.0 machine, that I just finished upgrading to 13.1 with slackpkg.(did slackpkg update;slackpkg upgrade-all; slackpkg install-new. I did not restart the machine). Now im attempting to run the mrtg slackbuild but I get the following during the configure stage:Quote:
...
... [ alot of configure output omitted ]
...
[code]....
View 3 Replies
View Related
Apr 28, 2010
I'm trying to install mongodb (so called schema-less database). It requires libraries like libjs, libmozjs, spider-monkey and the like. I had an idea that installing xulrunner would provide most of that, but it doesn't do so in any nice way. I'm a bit scared to muck up my firefox/thunderbird/seamonkey system, which I suspect might easily happen if I tread wrong.
View 3 Replies
View Related
Feb 15, 2010
Up until a couple days ago, samba server worked perfectly. I don't remember doing anything with it except adding another share or two. I can still run SWAT, even from remote computers, but I still have the problem of starting the samba server itself.
#./rc.samba start
Starting Samba: /usr/sbin/smbd -D
/usr/sbin/nmbd -D
#./rc.samba restart
smbd: no process killed
[Code]...
After issuing the "start" option, I go into SWAT and the status page says samba's not running.
View 4 Replies
View Related
Mar 20, 2011
I'm running KDE on slack13.1 However i've wrecked my system tray.When i "add widgets" and add "system tray" the widget aligns to the left of screen which means when i minimze windows they just disappear.
View 3 Replies
View Related
Apr 30, 2010
I have a new install of Slack 13 and upgrading to current will break a lot of things for my 4 year old son (he's a gnome guy, what can I say). I will be using this machine too, and I NEED KDE, but of course the stock KDE packages are unstable to say the least. I know I've seen people talking of downloading upgraded kde packages for slackware 13, but when I google, I find a lot of things complaining about the stock KDE and of course Eric's packages for current.
View 2 Replies
View Related
Jan 1, 2011
I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :
(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration
Fatal server error: no screens found
but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows
Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary
View 21 Replies
View Related
Jan 15, 2011
I have installed torcs (using sbopkg) and the dependencies plib, OpenAL, and freealut. On running it I get
Quote:
GLUT: Fatal Error in torcs-bin: failed to create OpenGL rendering context.
I am not sure if it is relevant but this is xorg.conf
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jul 28 19:48:57 PDT 2009
Section "ServerLayout"
[code]....
View 9 Replies
View Related
Sep 9, 2010
I was just mucking about in xfce, trying out new window buttons in conjunction with the black theme - dusk?? - when POW! - X shut down. Rebooting didn't restore things. Error is along these lines:
xfce4-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0. xfwm4: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
[Code]....
Is there a config file I can edit to get away from the window button setting it dislikes, or is reinstalling xfce the only option?
View 2 Replies
View Related
Feb 27, 2010
I am installing slackware 13 on a machine that already has slackware 64- current. I'm doing this to try LFS which needs a 32 bit host (I know about CFLS, but I'm trying to keep it simple). My current installation is on sda with / being on sda1. My new 32 bit installation is on sdb with / being on sdb2.
I didn't install LILO as I figured it would be easy enough to just edit the current lilo.conf and run lilo after rebooting from the installation and then rebooting again into the new 32 bit install. What keeps happening is that the system boots seemingly fine, but after some wierdness I realized that it is booting a kernel from the 64 bit install on sda1. I'm assuming this is a simple screw up in my lilo.conf but I'm not sure exactly how to fix it.
lilo.conf:
Code:
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append=" vt.default_utf8=0 quiet"
[Code]...
View 2 Replies
View Related
May 18, 2011
I have been searching for what causes these error messages from icewm. The moment I log out of the icewm session I see the following errors:XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":1.0"after 154 requests (154 known processed) with 0 events remaining.icewmbg: Can't open display: :1. X must be running and $DISPLAY set.I see this with 1.3.6 and also 1.3.7. I see the errors in Slackware 12.2, 13.1, and 13.37; and both run level 3 and 4. The errors appear with the proprietary nvidia, s3virge, tdfx, and virtualbox drivers.With 1.3.6 I was seeing concurrent segfault errors in /var/log/messages from icewmtray, but not in 1.3.7.I don't notice any related errors in the Xorg log.I see these errors only with icewm.Browsing the web reveals other people see these error messages too. Some people blame icewmbg and others blame X. I have not noticed anything definitive as to the cause.
View 1 Replies
View Related
Feb 11, 2010
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies
View Related
Mar 4, 2011
Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
View 6 Replies
View Related
Nov 13, 2010
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
View 5 Replies
View Related
Sep 16, 2010
Tried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
View 9 Replies
View Related
Dec 8, 2009
Last night software updater notification showed 29 updates. I was building a liveCD image so decided create the image first then install the updates. After the updates were finished, I did a reboot because some packages required it, I logged on successfully, then I shutdown for the night. This morning when I executed the same command used to create the liveCD image, I get the following error.
[Code]....
View 3 Replies
View Related
May 31, 2011
Ive been messing around on a Solaris box, installing precompiled lib/programs from the repos by extracting them and placing them in my home dir. It seems everything ive tried sofar works, except for irssi. I get the following error:
$ ~/bin/irssi
ld.so.1: irssi: fatal: relocation error: file /export/home0/leem2/bin/irssi: symbol boot_DynaLoader: referenced symbol not found
Killed
I have run:
$ ldd /export/home0/leem2/bin/irssi
and it has no missing libs
View 1 Replies
View Related
Nov 28, 2010
Xorg seems to crash randomly and with no real reason. Once it does, I can't restart it. If I try to restart it with GDM, nothing will happen. However once it crashes, Ubuntu's low graphics mode window pops up. Telling it to reconfigure the xorg config seems to do nothing for my problem. I will still crash after words.
Right now I'm running in an earlier kernel, hoping this will keep it from crasgubg
Here is my xorg log. code...
View 5 Replies
View Related
Dec 1, 2010
I am trying to apply updates, but receiving the following error:
[Code]....
View 5 Replies
View Related
Feb 19, 2011
A recently installed 10:10 displays this message at start up:
FATAL: Cannot load generic modules /lib/modules/2.6.35-25-generic/modules.deb
(As best I can remember.It disappears so fast).
As I am having trouble getting a fingerprint reader to work, I thought I ought get it fixed.e.
View 5 Replies
View Related
Jul 7, 2010
I have a virtual machine (VirtualBox) with Ubuntu 9.10 installed, I'm trying to install MySql community editor using the linux-generic package (the tar package), I followed all the procedure but I had a problem with the next line of code:
shell> scripts/mysql_install_db --user=mysql
I don't understand a lot about the command line, but I think this line of code is used to create the basic tables of the database (users and so on). the problem I got with this line of code is:
FATAL ERROR: Could not find mysqld
I googled it and after a while I found this blog:
azimbabu.blogspot.com/2009/07/mysql-5136-in-ubuntu-904-fatal-error.html
The blog says that the problem is a default instalation of SQL, and the solution is replace the file my.cnf in the location /etc/mysql for other file that comes with the package.
I didn't replace the file my.cnf, I only changed the name and it woked perfectly, and this is the problem, I don't understand why it worked.
Any one knows why this file is so important?What could happen if I delete this file?what is the purpose of the package mysql-common un Ubuntu?
View 3 Replies
View Related
Mar 27, 2011
when installing Wine I got the message 'Fatal error loading rundll32.exe'. keep it simple, I'm a newbie.
View 1 Replies
View Related
