I am trying to install the nvidia-drivers from Slackbuilds.org. When I try to run the SlackBuild, I get the following error:
Code:
install: cannot stat `cuda.h': No such file or directory
What am I missing?
The nvidia-kernel SlackBuild ran fine and created the kernel package.
I'm trying to backup every night a big directory (~2.5Gb) using tar+gzip.I'm calling tar like this:nice -n 19 tar --ignore-failed-read --exclude-tag-all=.kein-backup -Pczpsf '/backup/20100925233802f/archive.tar.gz' '/srv/products'And in 90% of the cases works just fine, in about 20 minutes is everything done. However, if it happens that in those minutes one file or folder from '/srv/products' gets deleted it reports me the following error:tar: /srv/products/prod14564.gif: Cannot stat: No such file or directorytar: Exiting with failure status due to previous errorsDoes it exist a parameter for tar to ignore this kind of errors? Is it there any other way to avoid these errors
View 3 Replies View RelatedSo I have created a Bash script with the intent of the program to change the names of the files in a folder's subdirectory.The code recognises the individual subdirectories, then is able to enter into one and list the files individually, but when it tries to change their information it says;' cannot stat ' : ' No such file or directory 'As if it is looking in the directory that contains the Bash script, not its subdirectory.It is essentially saying, I see a file here called FILE but sorry, I can't change FILE because FILE doesn't exist. kweh?Is this something outside the capabilities of Bash? Am I asking too much of it? Can Bash only manipulate files that are in the same folder as the script?
Code:
#!/bin/bash
echo enter directory
[code]....
can you see below command i give return me error however it has been working fine before. there is 1 directory i want to make it .tar.gz [root@sa1 script]# tar cvzf /var/opt/bkup_axigen/axigen_bkup_2.tar.gz /var/opt/axigen/domain tar: Removing leading `/' from member names tar: /var/opt/axigen/domain: Cannot stat: No such file or directory tar: Error exit delayed from previous errors
View 2 Replies View RelatedCode: stuart@stuart:~/$cat showthread.php.html | grep -o [URL][^"< ]*" | uniq | head -n3 | plowdown - cannot stat '-': No such file or directory Code: stuart@stuart:~/$ awk NR==$x Musiclist.txt | cut -d/ -f6 | basename $1 .mp3 .mp3 Here's some system info on the bash i'm using:
[Code]...
well I am a novice in Linux OS, I have a wireless card, it's a Linksys WUSB600N but it doesn't work in Ubuntu 10.10 Desktop Edition, which it is the one I have, 64 bits machine, so I read this [URL] and I did all the steps, I downloaded 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar but in the last part, sudo make install I got this error
alain@alain:~/t/2010_0915_RT3572_Linux_STA_v2.4.0.2$ sudo make install
make -C /home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
[Code],,,,
so i have no way to get connected to the internet, what is that error cannot stat `rt3572sta.ko': No such file or directory, I think thats why i can make the wireless card work.
I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
I think there is a problem with the sox package that comes with Slackware 13.1.I would appreciate any advice. I'm using the same file, 1.wav, in both cases. The output of file 1.wav is1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 HzOn 12.1, I can runsox 1.wav -e stat 2> /tmp/stat.txt
bash-3.1$ cat /tmp/stat.txt
Samples read: 37096920
Length (seconds): 420.600000
[code]....
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
View 5 Replies View RelatedI just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies View RelatedCan anyone provide a guide on how to install cuda drives for opensuse 11.2 64 bit?
View 1 Replies View RelatedI downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies View RelatedWhen a application is ran from the shell:fork() is calledexecve() is calledI know the shell stats the file to make sure the required permissions are allowed in the child shell. But I can not find this in the man fork. Nor can I find this in man execve. Which one of these processes/calls stats the binary to be ran?
View 1 Replies View RelatedI am working on getting my software packages installed on my fresh Slackware64-13.0 installation. Some (but definitely not all) of my executables are unable to be run.
I understand what PATH is for. It is for locating files, folders, executables in those directories when running from a Terminal window.
So, for example, I have just installed Cisco VPN Client for Linux, and it is the strangest thing. I should have access to this. I must not be understanding something here. Does anyone have any idea why this is not working for me? I have put in an example of what I am talking about.
I have no idea why this is not working.
I've just noticed a small problem I am having with my company file server. When making backups to an external NTFS drive weekly I have noticed that the file names with thai characters are not getting backed up. I receive the below error:
rsync: recv_generator: failed to stat (to the file name...)
Invalid or incomplete multibyte or wide character (84)
There are thousands of files on the server that contain thai characters in there names so how do I get around this problem so it will back up all files and not just the English character ones. I read somewhere that each file would need to be converted to a different character set but this would take years as there are so many files.
Running Slack-13.1 64 bit stable Upgraded this morning kdelibs shadow and xrdb (patches). Can't login anymore at init 3:
Code:
can't exec /bin/login: No such file or directory
Can see /bin/login from other distro what to do where to search?
Has anyone here ever installed the latest version of scilab on slackware 13 64bits? I just can't install/run it.
scilab-5.2.0
root@slack:/opt/scilab-5.2.0/bin# ./scilab
./scilab: line 343: /opt/scilab-5.2.0/bin/scilab-bin: No such file or directory
scilab-4.1.2
marcio@slack:~$ /usr/bin/scilab: line 58: /usr/lib/scilab-4.1.2/bin/scilex: No such file or directory
I tried older versions, same problem. I used to run scilab 4.x on slackware 11_32bit, it ran great.
So I have patched the 3.2 sources similar to the 3.1.3 sources. I used the slackbuild from 3.1.3 as well. I get to the install of the script and I get this:
Code:
...
running install_egg_info
Writing //tmp/SBo/package-python3/usr/lib64/python3.2/lib-dynload/Python-3.2-py3.2.egg-info
Creating directory /usr/man
Creating directory /usr/man/man1
/bin/ginstall -c -m 644 ./Misc/python.man
/tmp/SBo/package-python3/usr/man/man1/python3.2.1
cp: cannot stat `Demo': No such file or directory
I can't build Blender anymore without this update.
I'm trying to install a WiFi Wireless IEEE 802.11N/G/B WLAN 150Mbps Network Adapter USB2.0 on Slackware. I get the following message when I enter "make install." cannot stat rt3070sta.ko no such file or directory
View 9 Replies View RelatedInstalled Slackware 13.37 over the weekend. Good so far. Problem with Firefox though as it does not have a plugins directory where we can move libflashplayer.so into like in previous versions. Where do we put it to file Firefox (and Seamonkey) to play flash.
View 3 Replies View RelatedI'm using Slackware 13.37 x64 (upgraded to slackware-current) and I have trouble compiling mysql workbench 5.2.34.
The error is:
Code:
scintilla-marshal.c:2:25: fatal error: glib-object.h: No such file or directory
But I have that glib-object.h file:
Code:
$ locate glib-object.h
/usr/include/glib-2.0/glib-object.h
This is when I try to compile version 5.2.27:
Code:
./PlatGTK.cxx:13:21: fatal error: gdk/gdk.h: No such file or directory
Code:
$ locate gdk.h
/usr/include/gtk-1.2/gdk/gdk.h
/usr/include/gtk-2.0/gdk/gdk.h
I've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
/etc/crypttab:
crypthome /dev/sda9
/etc/fstab:
[code]....
Does gFTP have any prerequisites other than those listed in its README file?I have a situation similar to this thread from a year ago - Using the gftp package distributed with Slack 13.0, I receive a segmentation fault when trying to launch it.strace reported a truckload of "no such file or directory" errors, generally involving locale files, however the presence (or absence) of the glibc-i18n package has no effect.
View 6 Replies View RelatedI am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
I just installed openSUSE 11. The 64-bit laptop has a RealTek RTL8102E NIC, which SUSE misidentified during the install. I found the supposedly correct Linux driver on Realtek's website, but I'm getting a problem when trying to compile the driver and I can't find my problem or the solution in any current threads - so I must be doing something pretty stupid. I followed the directions.
[code]...