SUSE / Novell :: Install Cuda Drives For Opensuse 11.2 64 Bit?

Mar 23, 2010

Can anyone provide a guide on how to install cuda drives for opensuse 11.2 64 bit?

View 1 Replies


ADVERTISEMENT

SUSE / Novell :: Install Fails To Recognize Ide Hard Drives

Aug 25, 2010

I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing OpenSUSE 11.1 onto the IDE drive. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive and boot from it). If I parse the dmesg output I see the message "ata_piix 0000:1f.1 device not available because of BAR 2 (0x0-0x7) collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.

I've tried Ubuntu with similar results. Older kernels WILL install onto this same MB/PATA controller (Ubuntu 6.06, 2.6.15 and RHEL4) so it seems that something changed in the ATA driver as the kernel has matured and my bios isn't up to snuff for these pickier drivers.

View 2 Replies View Related

SUSE / Novell :: Can't See Any Folder In Ntfs Drives From 11.3

Aug 6, 2010

I have a dual boot comp with wins 7 and suse 11.3. There are 3 ntfs drives installed. I can read and write on 2 of them but I on one I cant. I can see the drive bute when I open it, there are no folders showing.The fstab is ok.

View 5 Replies View Related

SUSE / Novell :: 11.0 - Get Write Permissions Of NTFS Drives?

Jan 30, 2009

i am using SUSE 11.0 KDE 4.0 i had root account installed in 8.0 Gb drive, and a normal account installed in 4.0 Gb drive .And i was using rest of space for windows (NTFS). Now i want to use a drive (NTFS) to linux for additional requirements. i want get write permissions to that drive .. am i able to get ??r else ..i need to format with EXT3?

View 3 Replies View Related

SUSE / Novell :: OpenSUSE 11.2 Won't Install Fully?

Mar 15, 2010

So I have tried to install from LiveCD and from a LiveUSB stick. Installation goes fine till I get to CUPS daemon. Then I get the wait 30 seconds for CUPS to activate, that never works. Then it pops up with a wait one minute for CUPS to become available. Then it finishes the installation and restarts the system and I get previous installation has failed would you like to retry? It does this over and over again till I get an error with my user name and the mouse and keyboard quit working. I have tried in Failsafe mode, No ACPI, etc. and nothing seems to work. I don't know if it matters but I have an Asus mobo M4A785-M and an AMD Athlon II x3 440 chip. I am just ready to switch to Ubuntu

View 14 Replies View Related

SUSE / Novell :: Cannot Install OpenSuSE 11.3 On My Toshiba Satellite Pro?

Sep 21, 2010

I have a Toshiba Satellite Pro laptop with the following specifications:Proccesor: Intel Core i3 350M / 2.26 GHzRAM: 4GB DDR3Hard Disk: 320GB SATA 5400rpmArchitecture: x86_64The computer has already Windows 7 installed on the C drive whereas there's a D hidden drive with a copy of the recovery image.I'm having trouble to install openSuSE 11.3 as follows:I boot the system with the DVD in its drive. After the welcome screen the process stops
using the typical GUI interface and runs a less graphical one. It is at this point where a
window pops up with a request:"Make sure that CD number 1 is in your drive"I press OK but the window keeps popping up. Frustrated I hit Back and a red window comes up with the message:"No repository found."I cannot go any further than this point

View 4 Replies View Related

SUSE / Novell :: OpenSuse 11.2: Use Serial Mouse During Install ?

Dec 23, 2009

I'm installing OpenSuse 11.2 on some systems. Unfortunately the only mouse available is a serial mouse. Hence the installer doesn't recognize the mouse.And it is somewhat cumbersome using the TAB and ARROW keys to navigate the graphical installation.Does anyone know of a boot option I could use to get OpenSuse's installer to recognize a serial mouse ?

View 5 Replies View Related

SUSE / Novell :: Install OpenSuse 11 64bits On A Box Already Has 32bits OpenSuse Installed?

Nov 23, 2010

I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?

View 7 Replies View Related

SUSE / Novell :: Open Suse 11.2 Install Grub Entry For Chainloading Ubuntu?

Jul 20, 2010

I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has

ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8

[code]...

View 4 Replies View Related

SUSE / Novell :: Install A D-Link Access Point On Suse 11.0?

Sep 16, 2010

how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.

View 3 Replies View Related

SUSE / Novell :: Can't Get Suse To Install On The Prepared 20gb Partition?

Aug 23, 2010

I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.

I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.

View 2 Replies View Related

SUSE / Novell :: Cannot Install Python On Open Suse 11.2 586?

Feb 1, 2010

I tried to use different version of Python, and followed the Readme like this

./configure
make
make test

[code]...

View 3 Replies View Related

SUSE / Novell :: "Error 22: No Such Partition" From GRUB After OpenSUSE 11.3 Install

Aug 1, 2010

I tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.

After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:

Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition

Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.

View 11 Replies View Related

SUSE / Novell :: Can't Get Rid Of Patch 11.2 Opensuse

Feb 14, 2010

I am using kde and can't get rid of a gnome patch. Problem won't go away in updater applet tray or yast online update.

View 2 Replies View Related

SUSE / Novell :: Get Free Cd's Of OpenSUSE

Nov 21, 2010

Where can i request a free openSUSE cd's from online.I could not Download Because my Internet connection speed is very low.

View 1 Replies View Related

SUSE / Novell :: OpenSuSE 11.3 During The Installation?

Jul 21, 2010

I use Linux with a lot of pleasure almost 6 years... after installing Ubuntu 10.04 Itried to install openSuSE on with Ubuntu prepared partitions, 20GB for / and 120 for /home. I have tried 4 times to install SuSE, but I have each time same problem. Suse installer shows instead 20 and 120GB partitions 16 and 104 GB and insallation was failed with message that PC probably was attacked. Before was installed excellent worked OpenSuSE 10.3. I have no idea. It's PC with AMD 3200 64-bit, 1GB DDR, Nvidia7300SE.

View 3 Replies View Related

SUSE / Novell :: Upgrade Q - Opensuse 11.0 To 11.3?

Dec 17, 2010

For the past several years I have grown fond of ver. 11.0...I have installed many programs with that verison. I have checked out the Live ver. of 11.3, and I like it allot but I'm wondering if I can some how check the software available for 11.3 to see if the same program/s are available with ver. 11.3. In other words can I run the Live CD, click on the Yast package installer and look for the same programs I have with ver. 11.0 ?

View 1 Replies View Related

SUSE / Novell :: How To Install GCC Version 3

Mar 22, 2010

I am using open suse 11.0 with gcc 4.3.2. I am compiling a program which requires libg2c. Where can I find libg2c and how to install it?

View 8 Replies View Related

SUSE / Novell :: Allow Root Login Using Kde 4.5.3 On Opensuse 11.3?

Nov 6, 2010

How can I allow root logins using kde gui 4.5.3 on opensuse 11.3 ? Currently the gui says "root logons are not allowed" Rpms installed see listing [1]

[1]
# rpm -qa | grep -i kde |sort
NetworkManager-kde4-0.9.svn1184295-5.2.x86_64
NetworkManager-kde4-libs-0.9.svn1184295-5.2.x86_64
NetworkManager-openvpn-kde4-0.9.svn1184295-5.2.x86_64
NetworkManager-pptp-kde4-0.9.svn1184295-5.2.x86_64

[Code].....

View 4 Replies View Related

SUSE / Novell :: How To Get MAKE Command - OpenSUSE 10.3

Jun 14, 2010

I am using openSUSE 10.3 and the pc is DELL Optiplex 780. The network devices is not supported by openSUSE 10.3 but I may have found it's module. But I can't "MAKE INSTALL" it as my installation does not have MAKE command.

I have selected "Install All" during my installation. Linux version is 2.6.22.5-31-default.

What is the package name for the MAKE command? So that I can find it so that I can install it into my openSUSE 10.3?

View 3 Replies View Related

SUSE / Novell :: OpenSuSe 11.3 Refuses To Shut Down

Sep 7, 2010

I have just installed opensuse 11.3 on my box and it refuses to shut down. It shows a tty screen with the message "power down" but wont power off. After searching the web I found no solution until I compared the "halt" scripts of versions 11.3 and 11.2 (they are located in /etc/init.d). Both scripts differ only by a couple of lines that make reference to raid devices. As I am not using any RAID array in my BIOS, I copied my halt script (version 11.2) on top of the version 11.3 halt script and my box started to shut down and power off nicely! At least for me it worked!

View 28 Replies View Related

SUSE / Novell :: Unable To Get PDF In Firefox In OpenSUSE

Jan 6, 2010

I've had this issue since OpenSUSE 10.5 and Firefox 2.x. Now I'm on OpenSUSE 11.2 and Firefox 3.5.6. Here's the issue: I log into various sites to get my bank statements, utility bills, etc. They are all in PDF, and they open up acrobat reader and from there I save the bill as a permanent record. The first one I open opens fine. Subsequent sessions with subsequent providers (banks, whatever) opens up a new window as if to show me the PDF, but no PDF is there. Status on the window shows "done." No error messages. I have to shut firefox down, restart, log in again, and then it downloads fine. It's getting annoying.

View 2 Replies View Related

SUSE / Novell :: XEN: Paravirtualized Kubuntu In OpenSUSE 11.2?

Jan 11, 2010

I'm new to XEN, but I have a great book ("The Book of XEN") which is helping me get started. I have learned to use "virt-manager" to create a new VM, I have my dom0 running, and I want to add a domU, and I want it to be Kubuntu 9.10. But every attempt to use a Kubuntu install CD results in "not bootable" errors for the install disk. I have booted from the CD, so I know it's not corrupt. I also tried using "xm" manually to create the vm with the following configuration with the same result as in virt-manager:

name = "mx8711kbu"
maxmem = 768
memory = 768
vcpus = 1
bootloader = "/usr/bin/pygrub"
on_poweroff = "destroy"
on_reboot = "restart"
on_crash = "restart"

[Code]...

Am I stuck, or is there a way to do this? I do not have hardware virtualization?. That's not an option. I did a lot of searching on the web without much luck before posting this. I know this is not a new problem. I've found references to it.

View 3 Replies View Related

SUSE / Novell :: Which Partitions To Install 11.2 From LiveCD

Jan 22, 2010

I've an HDD with a dual boot of XP and Mint Linux. It works well. I'd now like to add OpenSUSE 11.2 but if I accept auto partition it seems to want to overwrite the Mint partitions which I assume are sda5 and sda8. So how should I proceed with manual install as I have the following large number of existing partitions:

[Code]...

Should I resize sda3? can I use sda8 as /Home for both Mint and OpenSUSE?

View 10 Replies View Related

SUSE / Novell :: Zypper Install Gdb - Does Not Install The Latest Version Of GDB

Dec 29, 2010

OpenSuse 11.2 This link shows that gdb-7.2-61.1.x86_64.rpm is the latest version of GDB, but when I do: zypper install gdb, the version 6.8.x gets installed! The following result is after forceful refreshment:

Code:

linux-uitj:/home/anisha # zypper repos
# | Alias | Name | Enabled | Refresh
--+-----------------+-----------------------+---------+--------
1 | KDE:KDE3 | KDE:KDE3 | Yes | Yes
2 | X11:lxde | X11:lxde | Yes | Yes

[code].....

View 4 Replies View Related

SUSE / Novell :: Desktop Effects Not Responding On OpenSUSE 11.3

Nov 6, 2010

I have effects working, but when I try the launcher I get no response and have to Force Quit. I am running Intel graphics so it shouldn't be a driver issue.

View 1 Replies View Related

SUSE / Novell :: Error: Could Not Refresh Repository 'openSUSE-11.0-Non-Oss

Nov 11, 2010

Have loved using v11.0 of Opensuse for years, lately I have noticed over time 7 of my 11 repo's have stopped/failed...does this means Novell-community has/will stop supporting this version and I should move on to a higher version ??? There hasnt been any change in my linux box for years.

Example: Refresh failed: Error: Could not refresh repository 'openSUSE-11.0-Oss': Valid metadata not found at specified URL(s) History: - File '/content' not found on medium [URL]' Error: Could not refresh repository 'openSUSE-11.0-Non-Oss': Valid metadata not found

View 1 Replies View Related

Server :: Install Novell SUSE Ver 11 From Different Computer DVD ROM Over Network?

Jun 23, 2010

Need to install Novell SUSE Linux version 11 from Different computer DVD ROM over Network.

View 1 Replies View Related

SUSE / Novell :: Install Usb Device In Linux Sese 10?

Jul 31, 2010

I have LG usb net setter, i want to install it on Linux Suse 10, anyone can give me the installation process for USB Netsetter.

View 1 Replies View Related

SUSE / Novell :: Installed Gpg2 On 10 - Package It And Install On Other Box?

Nov 23, 2010

I have downloaded tarballs of gpg2 (gnupg-2.0.16), compiled it, compiled dependencies etc. and have it installed on my Suse 10 box. Now I want to install it on another suse 10 box. Instead of doing the compiling/installing steps once again, is there a good way I can package gpg2, or tar it on my server, so it can be easily installed on the other server? Also, when I installed gpg, it was installed everywhere, /usr/local/lib, /usr/local/bin, my download dir etc. How do I pick the needed libraries and executable to make the package? maybe I Should specify a path for the gpg to be installed, then tar the whole directory. how to do the first part?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved