Running Slack-13.1 64 bit stable Upgraded this morning kdelibs shadow and xrdb (patches). Can't login anymore at init 3:
Code:
can't exec /bin/login: No such file or directory
Can see /bin/login from other distro what to do where to search?
The Slackbook reads:
Quote: The precompiled Slackware kernels are available in the /kernels directory on the Slackware CD-ROM or on the FTP site in the main Slackware directory. I am unable to reach it, what's the proper login?
[Code]....
I have used this guide to install kernel in my linux cyberciti.biz/tips/compiling-linux-kernel-26.html stage 1 worked perfectly. Now at stage 2 when I write the command dir/ls in the tmp directory I see the file: linux-2.6.26.tar.bz2 (2.6.26 is the version of my kernel) And now if I try to the tar function on my file and write it like this: Code: tar -xjvf linux-2.6.26.tar.bz2 -C /usr/src it gives me couple of errors like:
tar: bzip2: can not exec: no such directory
tar: error is unrecoverable: exiting now
tar: child returned status 2
tar: error exit delayed from previus errors
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
View 5 Replies View RelatedI just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies View RelatedI am working on getting my software packages installed on my fresh Slackware64-13.0 installation. Some (but definitely not all) of my executables are unable to be run.
I understand what PATH is for. It is for locating files, folders, executables in those directories when running from a Terminal window.
So, for example, I have just installed Cisco VPN Client for Linux, and it is the strangest thing. I should have access to this. I must not be understanding something here. Does anyone have any idea why this is not working for me? I have put in an example of what I am talking about.
I have no idea why this is not working.
Has anyone here ever installed the latest version of scilab on slackware 13 64bits? I just can't install/run it.
scilab-5.2.0
root@slack:/opt/scilab-5.2.0/bin# ./scilab
./scilab: line 343: /opt/scilab-5.2.0/bin/scilab-bin: No such file or directory
scilab-4.1.2
marcio@slack:~$ /usr/bin/scilab: line 58: /usr/lib/scilab-4.1.2/bin/scilex: No such file or directory
I tried older versions, same problem. I used to run scilab 4.x on slackware 11_32bit, it ran great.
So I have patched the 3.2 sources similar to the 3.1.3 sources. I used the slackbuild from 3.1.3 as well. I get to the install of the script and I get this:
Code:
...
running install_egg_info
Writing //tmp/SBo/package-python3/usr/lib64/python3.2/lib-dynload/Python-3.2-py3.2.egg-info
Creating directory /usr/man
Creating directory /usr/man/man1
/bin/ginstall -c -m 644 ./Misc/python.man
/tmp/SBo/package-python3/usr/man/man1/python3.2.1
cp: cannot stat `Demo': No such file or directory
I can't build Blender anymore without this update.
I'm very very tired, worked all night long, and I did't sleep for hours... So I'm like a zombie now... half awake, and half asleep.
I was trying to clear a directory. Then I run the command cd to enter the directory, and then before thinking I run this dangerous command. on my Linux server: "find / -mtime +1 -exec rm {} ;"
I got a lot of:
Could this command have deleted something inside these directories? I'm afraid that the next reboot the server won't startup...
I'm trying to install a WiFi Wireless IEEE 802.11N/G/B WLAN 150Mbps Network Adapter USB2.0 on Slackware. I get the following message when I enter "make install." cannot stat rt3070sta.ko no such file or directory
View 9 Replies View RelatedInstalled Slackware 13.37 over the weekend. Good so far. Problem with Firefox though as it does not have a plugins directory where we can move libflashplayer.so into like in previous versions. Where do we put it to file Firefox (and Seamonkey) to play flash.
View 3 Replies View RelatedI am trying to install the nvidia-drivers from Slackbuilds.org. When I try to run the SlackBuild, I get the following error:
Code:
install: cannot stat `cuda.h': No such file or directory
What am I missing?
The nvidia-kernel SlackBuild ran fine and created the kernel package.
I'm using Slackware 13.37 x64 (upgraded to slackware-current) and I have trouble compiling mysql workbench 5.2.34.
The error is:
Code:
scintilla-marshal.c:2:25: fatal error: glib-object.h: No such file or directory
But I have that glib-object.h file:
Code:
$ locate glib-object.h
/usr/include/glib-2.0/glib-object.h
This is when I try to compile version 5.2.27:
Code:
./PlatGTK.cxx:13:21: fatal error: gdk/gdk.h: No such file or directory
Code:
$ locate gdk.h
/usr/include/gtk-1.2/gdk/gdk.h
/usr/include/gtk-2.0/gdk/gdk.h
I've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
/etc/crypttab:
crypthome /dev/sda9
/etc/fstab:
[code]....
Does gFTP have any prerequisites other than those listed in its README file?I have a situation similar to this thread from a year ago - Using the gftp package distributed with Slack 13.0, I receive a segmentation fault when trying to launch it.strace reported a truckload of "no such file or directory" errors, generally involving locale files, however the presence (or absence) of the glibc-i18n package has no effect.
View 6 Replies View RelatedI am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
I recently downloaded the wine-1.3.16-x86_64-1sg.txz and did an install using: installpkg wine-1.3.16-x86_64-1sg.txz The install appeared to work correctly and I can now type 'wine' and get the version number etc... But, when I attempt to open an .exe file using wine I receive the following error: wine: could not exec wineserver I am new to Slackware (and linux in general); so where do I go from here?
View 5 Replies View RelatedOn a new installation of Linux Red Hat server, I was adding new users from the list using "newusers" command. I did not realize that one of the users was "root" so this is what line I loaded by error (among other users) : root:root:1176:501::/home/circuser:/bin/bash all other users from the list (160 of them) got loaded properly. I still have valid root login that I could use, but I'm not able to log in as root anymore. If I log in as user and then try "su" or "su -" I get error: ": No such file or directory".
I compared /etc/passwd, group and shadow on this server with old one I'm replacing and entry for root looks the same:
root:x:0:0:root:/root:/bin/bash ( in passwd)
root:x:0: (in /etc/group)
root:$1$OILC.ETm$LkoGprgqqgv6v8oLRUBnf.:15153:0:99999:7::: (in /etc/shadow) - similar to my old server
[Code]....
Password: su: /bin/bash:/sbin: No such file or directory i cannot delete that entry from /etc/passwd as i cannot login as root.
I want to do the following.
1. have a directory full of subdirectory
2. Pick the first file from every sub and copy that to the main directory and also rename that file to the same name as the subdirectory's name
3. need to work in commandline best is a simple script.
I've very new to linux, so please excuse my ignorance. I am trying to setup a number of servers to authenticate against my Windows Server 2003 active directory. I have successfully done this with one computer (Dell Optiplex 755), but I can?t seem to get it to work with my servers (Dell PowerEdge R710). I am using Fedora 11. I have setup samba and pam and have successfully joined the network. Everything with winbind seems to be working properly and I can get all the user info, etc. When I log in with a local account, everything is fine. If I try to log in with an account from my domain through SSH, I see the message Code:/usr/bin/xauth: creating new authority file /home/apkelley/.XauthorityAfter that, nothing happens and it is as if I haven?t connected to anything. If I try to log into the actual server using the graphical interface, it starts logging me in, shows a blank screen for about a second, and then returns to the login screen as if nothing has happened.I would greatly appreciate any suggestions for how I might fix this problem or how to find out more information about the error.Here are my smb.conf and system-auth files:
/etc/samba/smb.conf
Code:
[global]
[code]....
I just downloaded slackware 13.1(x86) and i'm trying to compile ndiswrapper-1.56 using the slackbuild from slackbuils.org and i'm getting this error:
Code:
Makefile:535: /usr/src/linux-2.6.33.4/arch/i486/Makefile: No such file or directory
make[2]: *** No rule to make target `/usr/src/linux-2.6.33.4/arch/i486/Makefile'. Stop.
make[1]: *** [modules] Error 2
make: *** [all] Error 2
looks like the folder i486 doesn't exist
I have compiled Evan's debugger but it must be run from the directory.
Previously, on KDE I did this via the menu editor but now I use XFCE, I need to add this to my .desktop file manually.
What would I add to the .desktop to make the application run in the directory of /opt/debugger?
To clarify, I am not talking about the path to the executable, but rather doing the equivalent of doing a
Where everything is referenced relative to the current directory.
I came from the Debian world so I did not do much building software from source. I successfully built wine from source, now the wine binary is in the same directory where the Makefile and all of the other source stuff is. I can run wine from that directory fine, but I sort of want to move it somewhere else. I tried moving the wine binary somewhere else, but when I try to run it I get
[code]...
What all do I have to move into the new directory to get wine working in the new directory? By convention, where should I move wine, I want it available for all users, should I move it to /opt/wine, or /usr/local/wine, or somewhere else?
I've done a low level format on them so they're completely empty. When I use them with my windows machines, they're absolutely fine. When I plug them into my Ubuntu machine, there is a hidden directory created called 'RECYCLER' which I'm assuming is for deleted files?However, it also creates a .exe file in this directory called 0x2D9FA278 which has an Icon with an H in it and a comment of 'Facebook Photo' This has the effect of making all the directories on the stick into shortcuts! I googled the file name and it seems to be some sort of Trojan, but I don't understand how it's go into my Ubuntu machine, I've scanned with ClamAV and it finds nothing.
View 5 Replies View Related