can you see below command i give return me error however it has been working fine before. there is 1 directory i want to make it .tar.gz [root@sa1 script]# tar cvzf /var/opt/bkup_axigen/axigen_bkup_2.tar.gz /var/opt/axigen/domain tar: Removing leading `/' from member names tar: /var/opt/axigen/domain: Cannot stat: No such file or directory tar: Error exit delayed from previous errors
View 2 Replieswell I am a novice in Linux OS, I have a wireless card, it's a Linksys WUSB600N but it doesn't work in Ubuntu 10.10 Desktop Edition, which it is the one I have, 64 bits machine, so I read this [URL] and I did all the steps, I downloaded 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar but in the last part, sudo make install I got this error
alain@alain:~/t/2010_0915_RT3572_Linux_STA_v2.4.0.2$ sudo make install
make -C /home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
[Code],,,,
so i have no way to get connected to the internet, what is that error cannot stat `rt3572sta.ko': No such file or directory, I think thats why i can make the wireless card work.
I'm trying to backup every night a big directory (~2.5Gb) using tar+gzip.I'm calling tar like this:nice -n 19 tar --ignore-failed-read --exclude-tag-all=.kein-backup -Pczpsf '/backup/20100925233802f/archive.tar.gz' '/srv/products'And in 90% of the cases works just fine, in about 20 minutes is everything done. However, if it happens that in those minutes one file or folder from '/srv/products' gets deleted it reports me the following error:tar: /srv/products/prod14564.gif: Cannot stat: No such file or directorytar: Exiting with failure status due to previous errorsDoes it exist a parameter for tar to ignore this kind of errors? Is it there any other way to avoid these errors
View 3 Replies View RelatedI run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
So I have created a Bash script with the intent of the program to change the names of the files in a folder's subdirectory.The code recognises the individual subdirectories, then is able to enter into one and list the files individually, but when it tries to change their information it says;' cannot stat ' : ' No such file or directory 'As if it is looking in the directory that contains the Bash script, not its subdirectory.It is essentially saying, I see a file here called FILE but sorry, I can't change FILE because FILE doesn't exist. kweh?Is this something outside the capabilities of Bash? Am I asking too much of it? Can Bash only manipulate files that are in the same folder as the script?
Code:
#!/bin/bash
echo enter directory
[code]....
I am trying to install the nvidia-drivers from Slackbuilds.org. When I try to run the SlackBuild, I get the following error:
Code:
install: cannot stat `cuda.h': No such file or directory
What am I missing?
The nvidia-kernel SlackBuild ran fine and created the kernel package.
Code: stuart@stuart:~/$cat showthread.php.html | grep -o [URL][^"< ]*" | uniq | head -n3 | plowdown - cannot stat '-': No such file or directory Code: stuart@stuart:~/$ awk NR==$x Musiclist.txt | cut -d/ -f6 | basename $1 .mp3 .mp3 Here's some system info on the bash i'm using:
[Code]...
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
When a application is ran from the shell:fork() is calledexecve() is calledI know the shell stats the file to make sure the required permissions are allowed in the child shell. But I can not find this in the man fork. Nor can I find this in man execve. Which one of these processes/calls stats the binary to be ran?
View 1 Replies View RelatedI'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
If I type su, it gives me following error su: No such file or directory
View 5 Replies View RelatedI copied g95 executable under /usr/bin which is clearly in my PATH. When I type g95, it says "bash: /home/username/bin/g95: No such file or directory". Why doesn't it look for somewhere else that is in my PATH?
View 5 Replies View Relatedi have this make file in order to generate hello.exe.compiled with visuel c++.
Code:
#include <iostream>
using namespace std;
[code]....
I am trying to compile the code. I am getting this following error. Am I missing any package?
x86_screen.h:12:22: error: X11/Xlib.h: No such file or directory
In file included from osal_event.c:12:
x86_screen.h:25: error: expected specifier-qualifier-list before �Display�
make[1]: *** [osal_event.o] Error 1
I am migrating an application from HP-UX to Redhat Linux and I have some files of scripts. In one of the script files I have the line /pylive/smartPAY/spserver/scripts/sp.con which is the correct path and file name for an existing file. However I get the message "No such File or Directory/pylive/smartPAY/spserver/scripts/sp.con" The script worked fine in HP-UX, why not in Redhat Linux?
View 6 Replies View RelatedI am trying to compile a memory map module cmem.ko from TI codec tools. This is for the DSPlink software development for the OMAP3530. I am compiling this on the host(Ubuntu). First error could not find cc1 and i re-installed gcc and added it to the path. That fixed that error but then I get to this:
cmem.c:38:19: error: stdio.h: No such file or directory
cmem.c:39:20: error: unistd.h: No such file or directory
cmem.c:40:22: error: sys/mman.h: No such file or directory
[code]....
When testing my script for a question, I find that when I execute the expanded commands, I get no error message, but when I source the file with the command, I get 'No such file or directory'. Here is what I mean:
[code]...
I am trying to compile a file named process_30sec.c(thats a C program) through the Ubuntu terminal and it is showing the following error in command terminal: process_30sec.c:15:23: error: asm/bitops.h: No such file or directory I have just started using Ubuntu&Linux so I am not familiar with lots of commands and things going around.I am using the following command to compile the process_30sec.c file:
kutub@ubuntu:~/Desktop$ gcc process_30sec.c
The above mentioned program file contains a header file <asm/bitops.h>, that I need to use in the program.It seems that this header file is not recognized by the system, and it needs to be included somewhere in the system so that the terminal would allow me to compile this program.
I'm trying to install a WiFi Wireless IEEE 802.11N/G/B WLAN 150Mbps Network Adapter USB2.0 on Slackware. I get the following message when I enter "make install." cannot stat rt3070sta.ko no such file or directory
View 9 Replies View RelatedMy ubuntu stops when mounting system hdd. The screen display the following messages :
mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd[560]: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_
I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user
I am trying to upgrade my NAS with anew toolchain, gcc-4.5.2. The NAS have been "hacked" fonz_plug, that contain a gcc version 4.1.3 with uClibc. I have download all needed tar files and done the following.My goal is to upgrade the gcc to 4.5.2 and replace the ucLibc on the system with a GNU libc.
# Pass one
#
# binutils
./configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --with-gmp=/ffp --with-mpfr=/ffp
But when I try to compile the gcc with
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-__cxa_atexit --with-float=soft --enable-languages=c,c++ --with-build-sysroot=/ffp --with-build-time-tools=/ffp/bin --with-system-zlib --enable-threads=posix --disable-bootstrap
[Code]...
I create a simple code for add two number:
Code:
#include<iostream.h>
#include<stdio.h>
main()
{
int num1, num2, sum;
code....
I search the answer to my problem in various forums but I can't solve the problem.I think that is due to I need some package or that I don't install the necessary libraries.
Is there any way to tell which file or directory this is referencing in particular?
View 8 Replies View Relatedtrying to write my thesis in Lyx 1.6. It works fine on my windows laptop at home but Not on my work computer. The problem is, when i try to view it in pdflatex it comes with with: Lyx: file name error The directory path to the document cannot contain spaces
View 1 Replies View RelatedI get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies View RelatedWorking fine: ==> scp my_log-bin.01393[0-9] root@192.168.103.66:/backup/ error - No such file or directory: ==> scp my_log-bin.0139[30-99] root@192.168.103.66:/backup/
View 4 Replies View RelatedI've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View RelatedSo, I had Ubuntu and Mint on my second hard drive (first drive has 7), and I reinstalled Ubuntu over the entire thing (upgraded from 10.04). Ubuntu now has one drive to itself, while Windows has the other. When I did this, I booted into Grub Rescue. Restarted and switched hard drives, same thing. I loaded the LiveCD and followed this repair guide. I discovered I don't have a Boot.cfg (or .lst) or another file of the three required. I noticed my install did not have any /boot partition, so I reinstalled a few times, all with the same error. Finally, I go back to the LiveCD desktop and run the following: sudo grub-install --boot-directory=/media/[long string]/boot /dev/sda And this is the output: Code: /usr/sbin/grub-probe: error: cannot stat: /dev/sda/ This is on Ubuntu 11.04 with GRUB2 (1.99).
View 9 Replies View RelatedI need to bring my Suse 11 server into active directory domain using samba and winbind. Please let me know the procedure how to do this.
View 3 Replies View Related