I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
View 5 Replies
I am working on getting my software packages installed on my fresh Slackware64-13.0 installation. Some (but definitely not all) of my executables are unable to be run.
I understand what PATH is for. It is for locating files, folders, executables in those directories when running from a Terminal window.
So, for example, I have just installed Cisco VPN Client for Linux, and it is the strangest thing. I should have access to this. I must not be understanding something here. Does anyone have any idea why this is not working for me? I have put in an example of what I am talking about.
I have no idea why this is not working.
So I have patched the 3.2 sources similar to the 3.1.3 sources. I used the slackbuild from 3.1.3 as well. I get to the install of the script and I get this:
Code:
...
running install_egg_info
Writing //tmp/SBo/package-python3/usr/lib64/python3.2/lib-dynload/Python-3.2-py3.2.egg-info
Creating directory /usr/man
Creating directory /usr/man/man1
/bin/ginstall -c -m 644 ./Misc/python.man
/tmp/SBo/package-python3/usr/man/man1/python3.2.1
cp: cannot stat `Demo': No such file or directory
I can't build Blender anymore without this update.
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
I just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies View RelatedI've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
/etc/crypttab:
crypthome /dev/sda9
/etc/fstab:
[code]....
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
I wanted to give kupfer a try, though I had to build it from source as it doesn't appear to be in the repos. The building seemingly went fine and installed, but I get these error(s) when I try to run the program:
Code:
$ kupfer
Kupfer: A free software (GPLv3+) launcher
Copyright � 2007--2010 Ulrik Sverdrup with others
http://kaizer.se/wiki/kupfer/
Error [kupfer.plugin.websearch] OpenSearchSource: [Errno 2] No such file or directory: '/home/snakepc/.mozilla/firefox/z6orlu2l.default/searchplugins'
[Code]...
I really missed the old Ubuntu file/dir. copying feature. When I copied in nautilus file explorer and paste into a terminal or text editor, I got the exact path (eg. /home/user/abc.txt), but when coming the Ubuntu 10.04, it added some "file://" prefix to the actual path (eg. file:///home/user/abc.txt), and I always had to manually delete the "file://" prefix. I don't see clearly that we need to place "file://" in front of the actual path (maybe just in the case we want to put the path in an Internet browser?). Wish this reversed back.
View 1 Replies View Relatedthere are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies View RelatedWhen running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies View RelatedI was looking to download "America's Army" and was doing alright until I hit a slight snag, It had an error while loading libgtk1.2, so I scoured the Internet for a way to fix this and the find command I found just told me it couldn't find the package, this is the first error I got when I tried to uncompress the "America's Army" version I downloaded:
/home/zac/.setup3597: error while loading shared libraries: libgtk-1.2.so.0: can not open shared object file: No such file or directory.
I followed [URL] that thread for installing BitPim on 10.04, but am getting this error:
Quote:
Traceback (most recent call last):
File "/opt/cx_Freeze-3.0.3/initscripts/ConsoleSetLibPath.py", line 35, in <module>
File "src/bp.py", line 20, in <module>
File "src/bp_cli.py", line 21, in <module>
[code]....
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
after updating my system I can't start VirtualBox-OSE anymore. I get the error:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I try to remove and to re-install VirtualBox-OSE again, still the same error. VirtualBox works as root but not from a user account. The installed version is VirtualBox-OSE.i686 3.2.6-2.fc13 @rpmfusion-free-updates
I am trying to run Ansys on Fedora (64bit), but every time I do it gives me this error. "error while loading shared libraries: libXm.so.3: cannot open shared object file: No such file or directory"Please help as I am stuck with this issue for long.
View 6 Replies View RelatedI'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
View 1 Replies View RelatedI've got a problem with running a program called Synapse in ubuntu 10.04.
When i run "runSynapse.sh" script nothing happens. Then i tried running it from terminal with sudo command and this is what i got:
Code:
error while loading shared libraries: libalter.so.1: cannot open shared object file: No such file or directory
I checked the synapse directory but libalter.so.1 was there.
Whenever I try to install a game thats in a .run file format, I get the following error. libgtk-1.2.so.0: cannot open shared object file: No such file or directory
I am trying to install Unreal Tournament.
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
I'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
/usr/lib/libgtk-x11-2.0.so.0
I have installed and built gazebo and it passed without any errors.I'm running on ubunto 10.10, and I installed gazebo version 0.10 (straight from their website)while trying to run it ( with a given world or without as shown below) I get the following error:
root:~# gazebo
gazebo: error while loading shared libraries: libassimp.so: cannot open shared object file: No such file or directory
I tried installing libassimp again, I have installed the 2.0 version from this link
[URL]
when searching for libassimp I get the following results:
root:~#find / | grep libassimp.so
/home/admin123/Downloads/gazebo-0.10.0/build/3rd_party/assimp/code/libassimp.so
/home/admin123/Downloads/assimp--2.0.863-sdk/build/code/libassimp.so.2.0.0
/home/admin123/Downloads/assimp--2.0.863-sdk/build/code/libassimp.so
[code]....
I am running after compiling a program and I find that I get the following. How best can I avoid this as i cannot run the program. I have tried removing the offending package, although I cannot find it. I have also tried re-installing. I have also tried changing FC and F90 flags to avoid the MPI version.
error while loading shared libraries: libmpi_f90.so.0: cannot open shared object file: No such file or directory
I've just installed F11 (x86_64) on my computer. I've been using x86_64 since Fedora 7 and normally I use a manually installed i386 firefox/thunderbird. This time I've tried to do the same using Fireox 3.5b4 but I got many troubles. The last error I got is:
./firefox-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory but that lib is not available on the standard repository. I've tried to use the i386 version of thunderbird (2.0.0.9) but I got this error: ./thunderbird-bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory but on the repository there is just the libstdc++-4.4.0-4.i586 lib.
my squid show like this when i try create swap directory
[Code]....
After upgrading from 10.4 to 10.10, the Ubuntu Software Center refused to start, and I got an icon in the notification area saying that "a problem occurred when checking for the updates." When I run software-center in the terminal, I get this error message:
Code:
Traceback (most recent call last):
File "/usr/bin/software-center", line 88, in <module>
from softwarecenter.app import SoftwareCenterApp
File "/usr/share/software-center/softwarecenter/app.py", line 32, in <module>
[code]...
I've tried re-installing apt and all related packages, even dpkg, and even downloaded the apt package directly from the ubuntu web site, but no matter what I do, I can't run these things. Aptitude and apt-get seem to work fine.
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
