Slackware :: Sox Package, 13.1, Fails On Sox 1.wav -e Stat?
May 3, 2011
I think there is a problem with the sox package that comes with Slackware 13.1.I would appreciate any advice. I'm using the same file, 1.wav, in both cases. The output of file 1.wav is1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 HzOn 12.1, I can runsox 1.wav -e stat 2> /tmp/stat.txt
bash-3.1$ cat /tmp/stat.txt
Samples read: 37096920
Length (seconds): 420.600000
[code]....
View 1 Replies
ADVERTISEMENT
Apr 10, 2010
I am trying to build ORBit2 as a dependency for GConf and then google-chrome.
This is a multilib system and I want 32 bit chrome.
Both my 64 bit and compat32 packages are all current as of today per ftp://slackware.mirrors.tds.net/pub/slackware/.
I have edited the Slackbuild as follows:
Code:
The build fails each time with:
Code:
I am using the newest version of ORBit2 as the above indicates, but this is just to see if the newer package would build. The X.X.17 version failed with the same output.
I have run:
Code:
I've had no problems building this package with current in a pure 64 bit environment.
View 4 Replies
View Related
Dec 15, 2010
I am trying to install the nvidia-drivers from Slackbuilds.org. When I try to run the SlackBuild, I get the following error:
Code:
install: cannot stat `cuda.h': No such file or directory
What am I missing?
The nvidia-kernel SlackBuild ran fine and created the kernel package.
View 14 Replies
View Related
Dec 29, 2010
i have Ubuntu10.10 (kernel-2.6.35-22-generic) installed. struct stat StatBuff;
[Code]...
I have mounted a windows share folder on /mnt. When i gave any directory within /mnt/ to stat function it fails with errorno 75. perror shows "Value too large for defined data type". Example 1 is fail but Example 2 works fine.
View 7 Replies
View Related
May 25, 2010
We are pleased to present one of our new creations: pkgbuild, a tool written in standard C++, using libCURL, ZLib, BZip2 and libLZMA (part of XZ). It is a modern Slackware packages builder, network-transparent, multi-architecture, designed to greatly simplify the creation of a package, automatically executing the required post processing.
What does it do? Recognize and build packages for the following architectures: i386, i486, i586, i686, x86_64, IA64, IA32e, s390, s390x, sparc and sparc64.
[Code]...
View 14 Replies
View Related
Nov 17, 2010
I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:
[Code]...
View 2 Replies
View Related
Feb 13, 2011
I am very happy to announce that today I succeeded to install full Slackware ARM on the pandaboard: URL...I did the following:
* sd with 2 partitions, one (vfat) for bootloaders (MLO, u-boot.bin) and uImage and the other one (ext2) for minirootfs
* copy xloader (MLO), uboot and uImage from Angstrom distro on the first partition
* copy Slackware ARM minirootfs on the second partition with Angstrom modules in the usual path (/lib/modules/...)
* boot in ARMedslack
* install all the others packages via NFS
I had to make some changes to configuration files as indicated here:URL...The next step is to build a kernel and modules for omap4 by myself and use them instead of the Angstrom ones.One question: is there any kind of package manager, such as slap-get, sbopkg, etc. for Slackware ARM? If not, can I use the SlackBuilds from slackbuilds.org? How to modify them?
View 6 Replies
View Related
Jul 28, 2010
Anybody know of a slackware package for the Iced Tea Java thing? I have the rpm (I have fedora anyhow) but I would like a slackpkg to cstick in here.
View 8 Replies
View Related
Mar 5, 2010
after a while of using Gnome with Fedora 12, I installed Openbox and started the configuration process. Everything is pretty much just the way I like it, but when I open the package manager and try to install something, it says "Authorization failed: you have failed to provide proper authentication. Please check any passwords or account settings" I'm sure it's because I forgot to add something to my autostart.sh, but I'm not sure exactly what...
View 5 Replies
View Related
Apr 29, 2010
I installed Fedora 12 inside VirtualBox and trying to make Software Update. It fails with different messages which looks like:Could not add package update for ..Package name may differ. Internet connection is working. Is there another way to update the system?
View 2 Replies
View Related
Feb 26, 2010
I am brand new to openSUSE (coming from Fedora then Kubuntu then Linux Mint) and I must say I am very impressed. Unfortunately I am also a C# developer and I need Mono (and more specifically MonoDevelop) to function correctly. I installed MonoDevelop from YaST and started with the simple "Hello World" command line project that is included by default. I then added Tarball packaging to the solution and attempted to build the package. It spit out the following error:
"Package creation failed. Object reference not set to an instance of an object"
I then tried double clicking on the Tarball package in the solution and it gave me an Unhandled Exception error dialog with a stack trace. Does anyone know what could be causing this problem? It's as if I am missing a required package or something. I have tried to install automake but that didn't change anything.
View 7 Replies
View Related
Jul 31, 2011
I have a like problem with all programs last time:
For example, package libtwolame0 installation fails
Code:
I had a like problems with another packedges, when try install mplayer and codecs from Packman.
View 2 Replies
View Related
Feb 8, 2011
I'm trying to install a package which is failing these dependencies:
[code]...
I downloaded Gnome2-GConf-1.044.tar.gz and I installed it, but I still the package fails the dependencies, even Gnome2::Gconf. What I can do?
View 3 Replies
View Related
Mar 28, 2011
I found the source, but it's missing a few header files.I tried downloading a few but it wasn't working correctly.I'd rather install this package properly.
View 2 Replies
View Related
Jan 19, 2011
I'm elated when I see software download pages that include a binary Slackware package.wrt KVIrc, their Slackware package is at the top of their list of binaries.They've got an rpm too, but it's SuSE, not Redhat - I found that to be pretty kewl too.I wonder if they're Slackers... hm...Well, that having been said, there's also a SlackBuild for it at the repository.I'm going to give this client a spin and see how I like it.Here's the URL: http://www.kvirc.net/?id=releases&pl...=4.0.2&lang=enUPDATE: The mirrors I checked are reporting 404 errors... bummer.
View 3 Replies
View Related
Apr 27, 2015
After Updating to version 8.0 today...
Package Updater GUI is Failing with the message:
No updates are available
No network connection was detected.
=================================
I did updates almost daily on wheezy
Todays updates [via the Pkg Updater GUI] were over 300 meg.
After the updates and reboot
System was showing version 8.0 in the GUI desktop and using 'cat /etc/debian_version'
Then...
From terminal I did ...
apt-get update
apt-get dist-upgrade
The dist-upgrade was over 40 minute and ~ 500meg
Things seemed to go well.
I updated sources.list with apt-spy.
[In order to trouble-shoot: I subsequently commented-out the apt-spy sources and found some generic sources on internet]
==========================================
# sources.list generated by apt-spy v3.2.2
#
# Generated using:
#
[Code].....
apt-get and Synaptic GUI both work.
I did/reviewed some settings in the Synaptic GUI I imported two v8 signing keys into Synaptic from [URL]
Package Updater GUI is Failing with the message: No updates are available No network connection was detected.
View 5 Replies
View Related
Mar 7, 2011
I have a desktop running on Fedora 14. I installed LAMP by using scripts for package installation. That works fine. Also, I have a virtual environment (Virtual Machine Manager), in which I installed Fedora 14 as well. I tried to install LAMP by the same scripts and the same packages as on my desktop, but strangely - it does not work.
I figured out that in both cases two instances of httpd.conf are installed, one residing in /etc/httpd/conf/, the other one in /usr/local/apache2/conf. The first one seems to belong to the server that is by default installed together with Fedora 14. The second one is the result from the package installation.
For a reason unknown to me, the second one (/etc/httpd/conf/httpd.conf) is always activated on my desktop, while the first one (/usr/local/apache2/conf/httpd.conf) is activated by default in my virtual computer. I have been able to change the DocumentRoot with succes.
I know how to install LAMP with yum, I have a second virtual computer with LAMP installed by yum, and the whole question is not an urgent one, but... I am just curious... what could have caused the difference? And what would I have to do whenever I would like to use the package installation or vice versa?
View 4 Replies
View Related
Jun 14, 2011
Code:
$ su -c 'yum update'
Password:
Loaded plugins: presto, refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package libva-freeworld.x86_64 0:1.0.12-1.fc15 will be updated
---> Package libva-freeworld.x86_64 0:1.0.13-1.fc15 will be an update
--> Finished Dependency Resolution .....
View 2 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
Jan 8, 2010
I have two computers running Kubuntu 9.10 (using the upgrade paths from 8.04 and so on) one running 32bit and the other running 64 bit and I have the following problem: On the 32bit version installing the repository package for Digikam, everything works just fine. On the 64bit version I have two problems:
First digikam won't start due to the following error:
digikam: symbol lookup error: /usr/lib/kde4/digikamimageplugin_freerotation.so:
undefined symbol: _ZN7Digikam11ImagePlugin17setActionCategoryERK7QSt ring
I'll have to delete all digikamplugin files from /usr/lib/kde4 and then it works from the command line. It appears that everything is working as it should.Second, starting digikam from Lancelot does nothing.
View 1 Replies
View Related
Nov 23, 2010
I have Ubuntu 10.10 AMD64 installed. When I try to start the Synaptic Package Manager it attempts to start and then quits. I have tried running it through terminal and get the following output.
roy@Bastard:~$ sudo synaptic
sudo: /etc/sudoers is mode 0640, should be 0440
sudo: no valid sudoers sources found, quitting
I get the same output for sudo apt-get update & sudo apt-get upgrade.
View 7 Replies
View Related
Apr 17, 2010
Question is: How do I compile a package for little endian on big endian proceessors? Gpart is known to build on arm-el, ia64, i386, and amd64. I'm using gcc 4.3 and have versions 3.4, 4.1, 4.2. Build environment is debian lenny, powerpc.
View 4 Replies
View Related
Nov 20, 2009
my update today failed, because the packages raydium and maniadrive depend on libphp5-5.2.9.so, which is provided by php-embedded, which is (apparently) not in the fedora 64bit repository There does however seem to be an i586 version...
View 2 Replies
View Related
Jul 12, 2010
I'm having troubles running systemtap scripts. It fails to run with message:
Code:
Checking "/lib/modules/2.6.33.3-85.fc13.i686/build/.config" failed: No such file or directory Ensure kernel development headers & makefiles are installed.
Then I typed:
Code:
$rpm -q kernel kernel-devel kernel-debuginfo
kernel-2.6.33.3-85.fc13.i686
kernel-devel-2.6.33.5-124.fc13.i686
kernel-devel-2.6.33.6-147.fc13.i686
package kernel-debuginfo is not installed
So no kernel-debuginfo, a package which I cannot find in repo. So where to get it and why it's not included in default installation if SystemTap is. It's like having Apache without tcp/ip stack.
View 2 Replies
View Related
Jul 18, 2010
When I try to upgrade from 9.10 to 10.4 the upgrade fails. I am not sure whats going on. I looked at the logs /var/log/dist-upgrade and grepped for hostname and found this:
apt.log:Investigating hostname apt.logackage hostname has broken PreDepends on upstart-job apt.log: Considering upstart 12956 as a solution to hostname 5103 apt.log: Removing hostname rather than change upstart-job main.log:2010-07-18 22:49:07,574 DEBUG The package 'hostname' is marked for removal but it's a ESSENTIAL package main.log:2010-07-18 22:53:01,415 ERROR Dist-upgrade failed: 'The essential package 'hostname' is marked for removal.'
Why is hostname being marked for removal?
View 1 Replies
View Related
Jul 2, 2010
When I try to add software sources (specifically those for Scratchbox, but I get the same error with everything), I get an error message: "http://http not found". Obviously that is not a valid APT line and I have no idea what it is doing in my software sources. How do I take it out?
View 2 Replies
View Related
Nov 2, 2015
After receiving no response either here or on IRC, I copied 80 package files to a temporary directory and ran dpkg-scanpackages . /dev/null > Packages with the expected result. The curious part is the delay when output redirection is not used: nothing appears until the script completes, when the result is dumped to the screen. It therefore appears that there is an upper limit to the number of packages that the script can handle, somewhere between 80 and 42,474.
Is this an undocumented feature, or just a peculiarity of my system?
I'm new to Debian and wanting to set up a local repository on my work drive. After following instructions online and copying all packages (~43,000) from the DVD set into /work/Debian/8.2/packages/ I ran dpkg-scan-packages as instructed:
Code: Select all# dpkg-scan-packages . /dev/null | gzip -9c > Packages.gz
This produced an empty file. I then ran dpkg-scanpackages with no output redirection expecting to see a flood of text on the screen, but all I got were error messages suggesting that it can see the .deb packages but is not parsing them:
Code: Select allroot@qbx:~# dpkg-scanpackages /work/Debian/8.2/packages
dpkg-deb: error: invalid character ' ' in archive '/work/Debian/8.2/packages/libshhopt1_1.1.7-3_i386.deb' member 'debian-binary' size
dpkg-scanpackages: error: couldn't parse control information from /work/Debian/8.2/packages/libshhopt1_1.1.7-3_i386.deb
[Code] ....
This all seems in accord with the man page, and it's so simple I'm wondering what I'm missing.
View 1 Replies
View Related
Jun 7, 2010
I switched a working Lucid KVM guest from linux-server to linux-virtual and it could not mount root at boot time and issued a panic instead. Switching back (booted from CD and used "rescue a broken system") revived the VM.
My first guess is that some DM driver module needed for LVM is missing from the linux-virtual package.
View 2 Replies
View Related
Sep 17, 2010
However, I've been trying to get a splash screen up, and it doesn't work.This is the splash screen I want to use: http://gnome-look.org/content/show.p...?content=79783
I've tried to install Usplash, but the package was broken.I tried to install it via Softpedia, but it was missing the artwork .so.I've also tried to install SplashY, but it is also a broken package! How can I install this splash screen?
View 3 Replies
View Related
Apr 4, 2011
we need to install gnuplot and synaptic manager fails because Intrepid is unsupported. I know we can update to a newer version but we cannot do it now (we'll do it during summer holidays). What's the best way of installing gnuplot (or some other aplication) on our systems? Should we download from sources and compile? Could we add some special source to our list and download from there?
View 1 Replies
View Related