Slackware :: Cryptsetup - No Such File Or Directory While Trying To Open /dev/mapper/crypthome?
Jan 24, 2011
I've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
/etc/crypttab:
crypthome /dev/sda9
/etc/fstab:
[code]....
View 5 Replies
ADVERTISEMENT
Jan 23, 2011
We had this problem a while back but it went away with whatever updates lvm/cryptsetup have been through, but it's back again as of the latest update. Instead of symlinks to the /dev/dm-* devices, lvm and cryptsetup are both creating duplicate device nodes under /dev/mapper for already existing devices.
e.g.
Code:
gazl@slack:~$ ls -l /dev/mapper
total 0
crw------- 1 root root 10, 61 Jan 23 16:48 control
brw-rw-r-- 1 root disk 253, 0 Jan 23 16:48 lukssda5
brw-rw-r-- 1 root disk 253, 9 Jan 23 16:48 rootvg-lvhome
[Code]...
View 11 Replies
View Related
Mar 3, 2010
Slackware 13 Kernel 2.6.29.6 have three hard drives. Root is on own drive sda1. sdb and sdc are raid via mdadm with two partitions. one for /home raid0 md0 one for swap raid1 md1. md0 is encrypted vi cryptsetup. md1 is encrypted vi fstab. everything boots fine and is accessible. However, /dev/mapper/* shows sda1 as block device connected to the raid md0. swap crypted device is correct in /dev/mapper/*. fstab is set correctly. problem seems to be with initrd. I would like the correct device in /dev/mapper so that I can access drive info; size, available space, etc. now info shows only sda1 info
View 1 Replies
View Related
May 22, 2011
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
View 3 Replies
View Related
Sep 9, 2010
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
View 2 Replies
View Related
Jun 3, 2011
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
View 5 Replies
View Related
Nov 24, 2010
I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
View 5 Replies
View Related
Mar 5, 2010
I just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
View 9 Replies
View Related
Jul 23, 2010
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies
View Related
May 11, 2010
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
View 3 Replies
View Related
Feb 18, 2010
Well as you can see from my sig I am running Slack 13 and unfortunately did not discover the readme_crypt.txt on the installation cd until it was far too late. Not to worry, many hours burned and things learned.So I compiled and installed cryptsetup and for my test encryption I am using an external usb harddrive (sdb3).First off cryptsetup kept segfaulting with the luksFormat command and this seems to be a know bug. The workaround it to pass USE="dynamic" to config before you build the package. Then
Code:
# cryptsetup.dynamic -h sha512 --verify-passphrase luksFormat /dev/sdb3 test-crypt
# cryptsetup luksOpen /dev/sdb3
[code]....
View 2 Replies
View Related
Feb 15, 2010
there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies
View Related
Jul 27, 2010
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies
View Related
Aug 8, 2010
I was looking to download "America's Army" and was doing alright until I hit a slight snag, It had an error while loading libgtk1.2, so I scoured the Internet for a way to fix this and the find command I found just told me it couldn't find the package, this is the first error I got when I tried to uncompress the "America's Army" version I downloaded:
/home/zac/.setup3597: error while loading shared libraries: libgtk-1.2.so.0: can not open shared object file: No such file or directory.
View 1 Replies
View Related
Dec 22, 2010
I followed [URL] that thread for installing BitPim on 10.04, but am getting this error:
Quote:
Traceback (most recent call last):
File "/opt/cx_Freeze-3.0.3/initscripts/ConsoleSetLibPath.py", line 35, in <module>
File "src/bp.py", line 20, in <module>
File "src/bp_cli.py", line 21, in <module>
[code]....
View 1 Replies
View Related
Jun 10, 2010
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
View 5 Replies
View Related
Oct 26, 2010
after updating my system I can't start VirtualBox-OSE anymore. I get the error:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I try to remove and to re-install VirtualBox-OSE again, still the same error. VirtualBox works as root but not from a user account. The installed version is VirtualBox-OSE.i686 3.2.6-2.fc13 @rpmfusion-free-updates
View 12 Replies
View Related
Mar 28, 2011
I am trying to run Ansys on Fedora (64bit), but every time I do it gives me this error. "error while loading shared libraries: libXm.so.3: cannot open shared object file: No such file or directory"Please help as I am stuck with this issue for long.
View 6 Replies
View Related
Jul 10, 2011
I'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
View 1 Replies
View Related
May 11, 2010
I've got a problem with running a program called Synapse in ubuntu 10.04.
When i run "runSynapse.sh" script nothing happens. Then i tried running it from terminal with sudo command and this is what i got:
Code:
error while loading shared libraries: libalter.so.1: cannot open shared object file: No such file or directory
I checked the synapse directory but libalter.so.1 was there.
View 1 Replies
View Related
Sep 6, 2010
Whenever I try to install a game thats in a .run file format, I get the following error. libgtk-1.2.so.0: cannot open shared object file: No such file or directory
I am trying to install Unreal Tournament.
View 4 Replies
View Related
Mar 4, 2010
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
View 4 Replies
View Related
Mar 28, 2010
I'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
/usr/lib/libgtk-x11-2.0.so.0
View 6 Replies
View Related
Mar 14, 2011
I have installed and built gazebo and it passed without any errors.I'm running on ubunto 10.10, and I installed gazebo version 0.10 (straight from their website)while trying to run it ( with a given world or without as shown below) I get the following error:
root:~# gazebo
gazebo: error while loading shared libraries: libassimp.so: cannot open shared object file: No such file or directory
I tried installing libassimp again, I have installed the 2.0 version from this link
[URL]
when searching for libassimp I get the following results:
root:~#find / | grep libassimp.so
/home/admin123/Downloads/gazebo-0.10.0/build/3rd_party/assimp/code/libassimp.so
/home/admin123/Downloads/assimp--2.0.863-sdk/build/code/libassimp.so.2.0.0
/home/admin123/Downloads/assimp--2.0.863-sdk/build/code/libassimp.so
[code]....
View 1 Replies
View Related
Aug 6, 2010
I am running after compiling a program and I find that I get the following. How best can I avoid this as i cannot run the program. I have tried removing the offending package, although I cannot find it. I have also tried re-installing. I have also tried changing FC and F90 flags to avoid the MPI version.
error while loading shared libraries: libmpi_f90.so.0: cannot open shared object file: No such file or directory
View 1 Replies
View Related
Jun 18, 2009
I've just installed F11 (x86_64) on my computer. I've been using x86_64 since Fedora 7 and normally I use a manually installed i386 firefox/thunderbird. This time I've tried to do the same using Fireox 3.5b4 but I got many troubles. The last error I got is:
./firefox-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory but that lib is not available on the standard repository. I've tried to use the i386 version of thunderbird (2.0.0.9) but I got this error: ./thunderbird-bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory but on the repository there is just the libstdc++-4.4.0-4.i586 lib.
View 4 Replies
View Related
Jan 6, 2010
my squid show like this when i try create swap directory
[Code]....
View 2 Replies
View Related
Oct 31, 2010
After upgrading from 10.4 to 10.10, the Ubuntu Software Center refused to start, and I got an icon in the notification area saying that "a problem occurred when checking for the updates." When I run software-center in the terminal, I get this error message:
Code:
Traceback (most recent call last):
File "/usr/bin/software-center", line 88, in <module>
from softwarecenter.app import SoftwareCenterApp
File "/usr/share/software-center/softwarecenter/app.py", line 32, in <module>
[code]...
I've tried re-installing apt and all related packages, even dpkg, and even downloaded the apt package directly from the ubuntu web site, but no matter what I do, I can't run these things. Aptitude and apt-get seem to work fine.
View 7 Replies
View Related
Nov 12, 2010
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
View 2 Replies
View Related
Jul 12, 2011
i should install a old version of Java EE, so i can write code for a old kind of webservice. Here's what happens:
Code: michael@michi:~/Downloads$ ./j2eesdk-1_4_03-linux.bin./j2eesdk-1_4_03-linux.bin: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory I looked for the library in Synaptic, but there are only newer versions of libstdc++. I couldn't find a solution to this problem i was able to follow.
View 3 Replies
View Related
