I've been running with DSL and Linksys router, connecting servers and printer via hard-wire Ethernet. The router doesn't like to talk to things without a network connection (the only thing I can have is a USB wireless modem until I get HughesNet or some other satellite service). What I'm wondering is what I need (a bridge? a switch?) to plug stuff in and have them talk to each other nicely.
View 14 RepliesI am trying to setup a simple DNS Server which forwards all connections to ISP DNS except for my intranet webserver.E.g. intranet.com should be retrieved from 192.168.XXX.XXX...I have read tons of forums etc., but it seems that i am stupid. How to do that? Even with GUI its ok.
View 5 Replies View RelatedI've recently installed Ubuntu server 10.10 on an older Pentium 3 computer to test the capabilities of Ubuntu and to have more experience with the OS. During my install, the network card, a Kingston KNE100TX, was successfully detected however auto configuration failed. This was tried against a Windows 2k3 DHCP server as well as a Cradlepoint router. As expected, since no DHCP server provided an address, the routing table is empty.
I retried configuring the Kingston card with a static IP address. This time as expected, ifconfig showed the IP address that was assigned and the route table had been populated. Attempting to ping my gateway, 192.168.17.1, resulted in Destination Host Unreachable. The same results were encountered when the configuration was changed to a different network.
[Code]...
I am trying to create an intranet that will serve about 100 clients. If it is possible, I would like it to be set that anyone on the intranet would be able to type helpdeskin their browser bar and be taken to the intranet site. I have Webmin and there are just too many options to figure out how to do this. They may as well have written it in Chinese. File server? Email? Impossible.
I can get to the intranet locally by typing in the local IP, but no one wants to remember numbers.
Then, I need to get that intranet accessible via the internet. A domain name has already been purchased and our cable company has assigned us 5 static IPs. The issue here is getting the IP to link up with the server. The intranet has to be configured in such a way that it can be administered remotely. Again, with Webmin, I am clueless. I was going to try to use ISPConfig, but seeing as how you have to pay for the install directions
Can't access to slackware FTP site as anonymous ?It asks login and pass.
View 14 Replies View RelatedI want to do is make an old computer of mine that I use for web development be accessible to anyone within my LAN only.
so in a nutshell i don't want the world wide web to be able to access this server since I use it for development work only and i do most of my actual development work on another system since most of the applications i use requires windows.
I know you can block incoming traffic to all IPs or add individual IPs to allow in, but how can i make the firewall only accept incoming traffic from those within my LAN network?
if you wish to know what I'm using to configure my firewall, I'm using firestarter on this server
Installed 10.04 as a LAMP. I want to be able to create a new intranet site for testing purposes.
When creating a new site with in apache, what is the recommendation for the folder? With in the var/www? Everything appears to want a domain address and since its local only, what do I use as a domain?
I have webmin installed and I would think creating a virutual server would be my first step, but I am getting hung up on the domain address.
i've installed a PPTP VPN and have it configured under webmin. fine.i've connected from a remote laptop to the VPN and can access the local netowrk with it. greati really want to be able to access the outside world whilst tunneled through the VPN but clearly i need to do something else?
View 1 Replies View RelatedI am using Fedora 10. I have a network design like that:
WinServer --- (r1)router(r0) --- (eth1)LinuxPC(eth0) --- intranetPC
All netmask is 255.255.255.0
WinServer network is 192.168.1.0/24
intranetPC network is 10.10.0.0/24, gateway is IP of the LinuxPC(eth0): 10.10.0.2
Router:
r1 -IP: 192.168.1.253
r2 -IP: 10.10.0.253
LinuxPC
eth0 -IP: 10.10.0.2
eth1
-IP: 10.10.0.40
-GW: 10.10.0.253
I search in Internet several days to find how to configure the LinuxPC to a gateway. The LinuxPC can ping and connect the WinServer and intranetPC correctly, but the intranetPC cannot ping and connect the WinServer network.
I used the webmin to configure the Gateway.
I used the iptables to set allow all connect, than
iptables -t nat -A POSTROUTING -eth1 -j MASQUERADE
iptables -A FORWARD -i eth0 -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forward
In "/etc/sysconfig/network" add "FORWARD_IPV4=true"
There are a lot of boxes in this network and we have intranet site. If I connect computer directly to the network with everything set to automatic. I can see this intranet site. But I've installed a switch. One box has two net adapters and it takes internet, intranet and all from one adapter, the other adapter is connected to switch. Now, I have connected to this switch two computers. Internet is working fine. But I cannot get to this intranet site from these boxes. I can get into shares of other computers in the network but they cannot see me. Everything is hidden behind the gateway. But that's not the problem for me. All I want is to get to this intranet website. How can I do it?.
View 2 Replies View RelatedI work for an organization with a few hundred employees. We need a very simple CMS for posting basic organizational documentation such has step-by-step instructions, as well as pdf and MS Office documents.We would prefer something that would organize content hierarchically, so we can structure the info into departments and functional areas. A MySQL or similar database is preferred, but flat file is okay as long as it does not limit content/structure too much.We would probably have about 15 to 20 content authors/editors. No workflow, authentication (except authors/editors) or secure content areas are required.
The only limitation would be that the content could only be accessed from a particular range of IPs. (I assume that would be set in Apache.)
I plan to host a Server. I want to know which is the best for Visualization.
Cent OS = > Xen
VMware = > open source.
i need to host a intranet in my company. they r going use java web based.which way is the best solution improve the I/0 request speed.
I have been trying to set up an old pIII 700Mhz PC as a local intranet server to run some PHP code.
I have got debian installed setup ssh since it is a headless computer mounted a usb hard drive to store the web page remapped apache2 to use the /mnt/sda1/html/ folder and tested that php scripts are running
now what i can't seem to get working is the following:
ftp access to /mnt/sda1/html so I can upload files from my pc on the network and
phpmyadmin so i can easily manipulat mySQL databases.
after reading [URL] I typed in #apt-get install phpmyadmin
it downloads a bunch of stuff and says it is installing it but when i do the next step in the instructions go to
http://192.168.0.100/phpmyadmin/
I get a 404 Not Found error.
I can not open the corporate intranet portal, runnnig on windows server 2008 with domain users. In Centos I could login just fine - firefox/konqueror just prompted me for my NTLM windows domain username and password - I typed those in and browers sucessfully loggem me in and I could surf the corporate portal. Note that NTLM authentication is configured as a fallback from kerberos authentication (so told me our portal admin)
However, in Fedora11 when I try to open the corporate (intra(not inter)net) portal, browsers just give me "Bad Request (Invalid Hostname)" error instead of prompting me for my domain username/password. I'm logged in on my F11 box as a local (not domain) user - as I did also previously on Centos Box.
I disabled SELinux, I disabled the firewall but still no luck. Not being able to open the corporate portal is a major showstopper for me, as I can not access many applications hosted there.
Currently I am using Ubuntu but I am having a huge problem with it right now and it may force me to abandon my linux hunger and get Win 7. I am hoping that Fedora may be different enough that it will solve my problem if I switch. I have my linux box (ubuntu 9.10) that connects to the internet through a wireless usb dongle. and it works perfectly.I have network shares that allow me to share content with my media player (modded xbox) in a different location of the house. I added a tv to my office and connected another xbox to it. This connection to my linux machine is made through a switch. This wired intranet connection works fine. I can see all of my shares.
The problem I have is when I am using the wired intranet connection and I want to surf the web. I cant. I have to disconnect the wired connection to do so. IS Fedora different enough to to allow me to be able to do so? I am a linux newbie and learning more everyday and I love it.
I have a windows PC and a fedora 13 linux box. When connecting to the linux from windows, I'd like to type the hostname instead of the ip address. Apart from setting the hostname, what do I have to do to publish my hostname on the intranet. (set up a nameserver?)
Though hostname works on the linux box, even this fails: nslookup myhostname Also I'm a newbie. I've tried installing some packages like samba and dhcp, using yum...;service chkconfig... and then checking whether nslookup or nmblookup work with my hostname. But it's just guesswork. Under system -> Administration there is no network option. but it is not clear what package is needed to install it, or whether such a thing is supported in fedora 13. I did try system-config-network, but it has few options none of which pertain to hostname resolution. The fedora manuals dont seem to cover it, at least in recognizable plainspeak to me.
I used the command: scp filename.c user@172.100.102.187:/user/pradeep
Here I want to copy file to 172.100.102.187 in /user/pradeep but it gives a
error: scp: /user/pradeep: No such file or directory
What is the command to copy a file from one system to another?
i run ubuntu 10.10 on a 3.5ghz quad core, 4gb ram.
I had the idea to make an inranet for me and my housemates.... i have an extensive video collection mostly in .avi and .mkv. i would like to make a page which diplays this video and lets you select from a playlist/browse the directory, howeve i didn't really want to have to recode all the video to flv.
is there a way i can do with VLC? i have looked about and the vlcwebplayer just looks like another flash player... does it support VLC recoding on the fly? or am i missing *something*
I have client workstations on separate intra-net LANs. Both intra-nets use network address translation (NAT) or masquerading on the LAN. The private network IP address should not matter (unless it does). When LAN-1 connects with an exterior web site, it will leave a record of the ISP public IP address. A LAN-2 connection could read this record, but how would it know how to reach into LAN-1? How can a network application running on a LAN-1 workstation find and connect with a network application running on a LAN-2 workstation? There is a utility called "woof" where one workstation presents a limited feature web browser for access by other hosts on the same LAN.
View 2 Replies View Relatedhave installed redhat linux 7.3, selected to install all options, but after system reboots, it comes to a black screen requesting a intranet login username/password. I have the machine connected to my home network via cat5 for dsl. I have reinstall many times using different setups that I think would have resolved my issue.
View 1 Replies View RelatedI've got 2 computers plugged into an "ethernet broadband router" sitting behind a DSL modem. I'd like to be able to send mail from one of the 2 computers to the other, preferably without going through the DSL modem, and preferably without assigning host names (if that's possible).
I've installed/configured sendmail (and sendmail-cf and m4) and am attempting babystep tests of the configuration by sending mail to a user on the originating computer.
So I can send email to root@localhost and it is received on the local host.
But if I try to send it to root@127.0.0.1, it bounces back like so:
This seems to be pretty fundamental (the localhost has an address of 127.0.0.1). Shouldn't I be able to use the IP address in place of the associated name?
Here's my hosts file /etc/hosts:
Code:
And here's my resolv.conf file, although I wouldn't expect that to come into play since I'm using IP addresses instead of names /etc/resolv.conf:
Code:
Here's my /etc/mail/access file:
Code:
I did verify that sendmail was configured to listen in on more than just the loopback address in /etc/mail/sendmail.mc, but that doesn't seem to be relevant until I can get email through to 127.0.0.1.
Which files do I need to create/touch to get this to work?
And can it be done without talking to the DSL modem?
i have configured the network as far as i can but when i click into samba shares and my home network comes up i click into the home network and the the available computers and printers are shown but when i click to open a site it just shows 0 files i have tried to share all files within my encrypted network but im still not doing something right. the same sites show up and all files are shared on my Windows computers and printerswhat am i missing or doing wrong? im using open suse 11.3 and KDE and Samba Shares.
View 3 Replies View RelatedI am using Ubuntu on a Windows network.
One of the computers have apache server (working), it has 192.168.1.6 IP, and the name of the computer on the network is "servidor"
I can't access from ubuntu, if I type http://servidor or 192.168.1.6, it goes to [URL], but I can access shared folders, just the host intranet server I can't
I have vmware with windows xp, and I can access http://servidor from there, but not from Firefox in Ubuntu.
(ubuntu10.10)i want to use use the Intranet and Extranet at the sanme time at school,how to set ?my Intranet ipv4 :10.62.14.79 255.255.255.0 gw 10.62.14.1my Extranet is DSL(use DHCP)my problem is when i use one of them,i must break the other.
View 3 Replies View Relatedwhat is the best configuration in httpd.conf to set up an intranet with Apache on Windows server?
View 1 Replies View Relatedi have qmail toaster installed on centos5.6 , i want to divert my local intranet mail to my gmail account,i am using thunderbird as email client
View 9 Replies View RelatedWe have one squid proxy server running on CentOS 5.3 64 bit with Squid 2.6. it works well for me.
but my problem/question is :
Is it possible to skip proxy for all Internet addresses? and only allow proxy if clients are accessing external addresses?
right now users have to explicitly say in the browsers .. BYPASS PROXY SERVER for local addresses after check the use proxy server
and address has to be mentioned. most users are non technical so they don't use this option or put wrong setting in bypass proxy option
I want to setup an intranet mail server as a project. I tried to go through various forums but could not get a satisfactory model. My sceme of things is as follows:The server a virtual machine is after a router which has a built in dhcp server. Prefer to use sendmail but postfix ok client machines should be able to access the mail on evolution/thunderbird or web access using squirrelmail.Mail will not be relayed to anybody outside the intranet.
View 1 Replies View RelatedBoth server (web01), in DMZ, and client (app01), intranet, are Linux OEL5.5.
A few hints follows:
1- I ssh to web01, in DMZ, from a intranet machine on my desktop, export my DISPLAY, and try to bring up xclock; nothing happens.
2- traceroute from web01 to app01 fails.
3- NFS mount from web01, nfs server, to nfs client, app01, fails.
How should my network configuration on web01 or app01 be to make this NFS mount from web01 to app01 work?Each server has 4 NICs, I've only used eth0.
I have configured httpd web server to allow each of the system users to have their own web page (using UserDir directive).At the same time I have configured ftp server to allow the users to upload their html files to the web server.With above set up my users need not have any knowledge of linux; they can work from any windows PC on the network.There is no problem in the above.However, now I need to allow my users to change their passwords. The point here to note is that the users should be able to do this even from windows PC on the network. One of the way is to configure a telnet server (or sshd). But I find that the windows PC does not have telnet client.The other idea is that I should put a php script on the server which would take user name and password from the web page and then change the password. I don't know how can the system account password be changed through script - I will have to check this out.
View 4 Replies View Related